ZIGBEE Motion Sensor Night Light User Manual

ZIGBEE Motion Sensor Night Light

تحديد

• نوع المنتج: PIR Sensor Night Light
• نوع المستشعر: الأشعة تحت الحمراء السلبية (PIR)
• مصدر الطاقة: (Please refer to product packaging for specific power source, e.g., AAA batteries, USB rechargeable)
• مصدر الضوء: قاد
• زاوية الكشف: (Typically 100-120 degrees, refer to packaging)
• مسافة الكشف: (Typically 3-5 meters, refer to packaging)
• أوضاع التشغيل: (e.g., ON, OFF, AUTO/Sensor Mode)
• مادة: (e.g., ABS Plastic)
• أبعاد: (يرجى الرجوع إلى عبوة المنتج)
• وزن: (يرجى الرجوع إلى عبوة المنتج)

وصف المنتج

• Package information:1set included:
• 1x لamp, 1x USB cable,
• 1 metal plate with adhesive Lighting mode:
• When switch is on “White” position, it says the lamp is on motion sensor mode When motion is detected at night, the lamp will turn on automatically,and the light is white.
• When switch is on “Warm” position, it says the lamp is on motion sensor mode when motion is detected at night, the lamp will turn on automatically,and the light is warm.
• When switch is on “OFF” position, meaning the lamp تم إيقاف تشغيله.

1. The human body sensing range is 120° horizontally, and the sensing effect is related to environmental temperature, body shape, and moving speed.
2. Please charge it before using it for the first time.
3. The surface of the product should not be covered by any other items. When cleaning the surface of the product, a soft cotton cloth should be used for wiping,
   Do not use corrosive cleaning agents for cleaning.
4. Avoid installing near heat sources, such as air conditioning vents, heating vents, humidifiers, and other sources of temperature fluctuations
   The location should be chosen carefully to avoid direct exposure to strong light or a humid environment.
5. If the brightness decreases or the working status is abnormal after normal use for a period of time, please charge it.
6. The red indicator light illuminates during charging, and it goes out when fully charged.

احتياطات السلامة:

• Failure to operate according to the instructions may pose a danger.
• Illegal operations may damage your items and even endanger your life. Any losses caused by improper operations will not be covered by the manufacturer
• We will not bear any responsibility.
• Please do not disassemble this product without authorization.
• This is not a toy. To avoid danger, keep it away from infants and children.

وضع الإضاءة:

1. When switch is on “AUTO” position, it says the lamp is on motion sensor mode. When motion is detected at night, the lamp سيتم تشغيله تلقائيًا.
2. When switch is on “OFF” position, meaning the lamp تم إيقاف تشغيله.
3. You can also set it to steady on mode by moving the button to “ON” position.

استكشاف الأخطاء وإصلاحها

• الضوء لا يعمل:
  • التحقق من الطاقة: Ensure batteries are correctly inserted and not depleted, or that the device is charged.
  • وضع التحقق: Make sure the switch is set to ‘AUTO’ or ‘ON’, not ‘OFF’.
  • الإضاءة المحيطة: In ‘AUTO’ mode, the light will only activate in dark conditions. Test in a dark room.
  • انسداد المستشعر: Ensure the PIR sensor is not blocked.
  • نطاق الحركة: Move closer to the sensor to ensure you are within its detection range.
• Light stays on continuously in ‘AUTO’ mode:
  • Constant Motion: Ensure there isn’t continuous motion within the sensor’s range (e.g., a pet, fan, or curtain moving).
  • عطل في جهاز الاستشعار: If no motion is present, try turning the device off and on again. If the issue persists, the sensor might be faulty.
• Light turns on too frequently or not frequently enough:
  • الموقع: Adjust the placement of the night light. Avoid placing it near heat sources (which can trigger PIR sensors) or in direct sunlight.
  • حساسية المستشعر: Some models may have adjustable sensitivity. Refer to your product’s specific features.
• الضوء خافت:
  • بطاريات منخفضة: Replace batteries or recharge the device.
  • الغبار/الأوساخ: نظف السطح الفاتح.