QIDI Q2 Printer Application Processing Control Board
تحديد
- Product Type: Control Board / AP Board
- Application: 3D Printer Replacement Part
- Model Support: Q2 / Q2C
التثبيت والاستخدام
- Power off the printer completely and unplug the main power cable.
- Open the left internal service access cover.
- Carefully disconnect all original cable and ribbon connectors from the old board.
- Remove the mounting screws, take out the old board, and place the new AP Board into position.
- Secure the new board with the mounting screws and reconnect all cables according to their original configurations.
- Reinstall the service cover, plug in the machine, and power on the printer.
المنتج انتهىview
The Q2 AP Board is the core control board designed specifically for QIDI Q2 and Q2C 3D printers. It serves as the primary system hub, coordinating print motion, temperature regulation, network communications, camera functions, and overall system operations.
الميزات الرئيسية
- معالجة عالية الأداء: Advanced motion control and real-time processing capabilities.
- Multi-Task Coordination: Seamlessly manages printing processes, temperature control loops, and networking protocols simultaneously.
- Intelligent Expansion: Supports advanced add-ons and robust system-wide communication.
التوافق
This replacement board is exclusively compatible with: QIDI Q2 / Q2C
محتويات الحزمة
- 1 × Q2 AP Board (Replacement Board Unit)
دليل التثبيت
- Power off the printer entirely and unplug the main power cable.
- Open the left internal service access cover.
- Carefully disconnect all original cable and ribbon connectors from the old board.
- Remove the mounting screws and carefully take out the old board, then place the new AP Board into position.
- Secure the new board with the mounting screws and reconnect all cables according to their original configurations.
- Reinstall the service cover, plug in the machine, and power on the printer.
ملاحظات السلامة
تحذير: Ensure the printer is completely powered off and unplugged before beginning installation. Always work in an ESD-safe environment to avoid static discharge. Do not force ribbon or USB connectors; handle all electronic components with care and keep the board clean and dry.
استكشاف الأخطاء وإصلاحها
| مشكلة | الإجراء الموصى به |
|---|---|
| Printer does not boot | Check ribbon and power connectors to ensure secure seating. |
| لا يوجد اتصال بالشبكة | Verify all AP board connection interfaces and network cables. |
| عرض شاشة غير طبيعي | Power down the printer and reseat the display flat cable. |
المستندات / الموارد
 | Q2 Printer Application Processing Control Board |
مراجع
- دليل المستخدمmanual.tools
Published: August 3, 2026