دليل مستخدم برنامج MOSS IllumaSync

مهم: If other devices are powered on, they may flash randomly. Power off other devices or put them in manual mode.
وظيفة RDM: Press the RDM button next to each device in the list to access basic RDM functions.

الاتصال واكتشاف الأجهزة:

Press Connect in the Individual Update tab.
If an error occurs, reinsert the USB and ensure the computer recognizes the device dongle.
Press Discover All to list connected devices.

تحديد البرامج الثابتة وتحديث الأجهزة:

Click Browse and choose the firmware file.
Select the device and press Update. Expect flashing if other devices are not powered off.

الطريقة البديلة:

Click the software version number to update a specific device.
Factory reset your device after firmware update by holding down the BACK & ENTER buttons.

IllumaSync™ Software Guide

IllumaSync™ software is designed to work with the IllumaDim™ product family of LED controllers. The software allows for firmware updates, setting updates, and simple DMX testing and control. Too use the software, you will require three things:

One or more IllumaDim™ Products from Moss LED™
IllumaSync™ software from the Moss LED™ webموقع
IllumaSync™ USB Dongle

مهم

Before you start, ensure that all devices are connected via DMX cabling and are powered on.

It is advised to only have IllumaDim™ products on the DMX chain when operating the IllumaSync Software.
Moss LED has not tested the effects of running the IllumaDim™ software while using non-IllumaDim™ products, and the effects are unknown.

Moss LED cannot be held liable for any unwanted effects caused by running IllumaSync™ software on nonnon-IllumaDim™™ products.

Plug all IllumaDim™ Products together via DMX cabling
Plug the IllumaSync™ USB to DMX Dongle Cable into the first IlluamDim™ product in the DMX chain

Download driver (if required) https://files.mossled.com/Software/CDM212364_Setup.zip
Download IllumaSync software https://files.mossled.com/Software/IllumaSyncV1.zip
Run IllumaSync™ Software
If prompted “Windows protected your PC,” choose “More Info” followed by “Run anyway”

تحديث البرامج الثابتة للتحميل مرة واحدة

Functionality: Upload firmware to one IllumaDim™ device at a time. This method is most successful.

مهم: If other devices are powered on, they may flash randomly. Power other devices off or put them in manual mode.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update

تحديث البرامج الثابتة للمجموعة

Functionality: Upload firmware to multiple IllumaDim™ devices at a time.

Recommended: Use when devices are physically close together and connected with a professional DMX cable.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update

تحديث إعدادات المجموعة

™
Functionality: Configure the settings of multiple IllumaDIM™ devices simultaneously

Recommended: Use when devices are physically close together and connected with a professional DMX cable.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

جهاز اختبار DMX

Functionality: IllumaSync™ can be used as a DMX tester for 1 universe at a time.

www.mossled.com
1.800.924.1585-416.463.6677
info@mossled.com

الأسئلة الشائعة

س: ماذا يجب أن أفعل إذا توقف الجهاز في وضع التحديث؟
A: Power cycle the device and try the update process again. Do not remove power during firmware update.

المستندات / الموارد

برنامج MOSS IllumaSync [بي دي اف] دليل المستخدم
IllumaDimTM، كابل USB إلى DMX Dongle، برنامج IllumaSync، برنامج

مراجع

دليل المستخدم

برنامج MOSS IllumaSync

تحديد

تعليمات استخدام المنتج