شعار لايت كلاودLCGATEWAY/OFC
دليل التثبيت
Office Gateway Manual

بوابة مكتب LCGATEWAY-OFC

Welcome to lighting control that just works.
Lightcloud is a wireless, cloud-based lighting control system that’s incredibly easy to install. There’s no networking or complicated dip switches. Just wire the devices for power and let us know what was installed.

محتويات

  • بوابة المكتب
  • سلك الطاقة
  • تزايد شريحة
  • براغي التثبيت x2
  • Device ID Labels
  • يدوي
  • ملصق لوحة

Lightcloud LCGATEWAY OFC Office Gateway  - Box

مواصفات الجهاز

رقم القطعة: LCGATEWAY/OFC
درجة حرارة التشغيل: 0 إلى 40 درجة مئوية
MAXIMUM RELATIVE HUMIDITY: 95%
STORAGE AND TRANSPORTATION TEMPERATURE: -20 درجة مئوية إلى 40 درجة مئوية
أبعاد: 4.97 بوصة × 4.97 بوصة × 1.5 بوصة
مدخلات طاقة التيار المتردد: Only use with provided power cord.
I NPUT VOLTAGE: 120 فولت تيار متردد، 50/60 هرتز
استهلاك الطاقة: شنومكس ما @ شنومكسف
صنعت خصيصا في الصين
Copyright © 2025 RAB Lighting, Inc.

Lightcloud LCGATEWAY OFC Office Gateway  - Icon

انتهى النظامview

Lightcloud is a wireless, networked lighting control system that enables near limitless control over lighting. Lightcloud can be accessed from nearly anywhere and any device by logging in to control.lightcloud.com.
Lightcloud comes with 10 years of unlimited support, so feel free to contact us if you have any questions at 1 (844) LIGHTCLOUD.

Of fice Gateway

The Lightcloud Of fice Gateway serves two main functions:

  1. On-Site Coordination of Devices. The Office Gateway acts as an on-site brain for up to 200 Lightcloud® devices.
  2. Off-Site Coordination with Lightcloud.
    The Office Gateway communicates with the Lightcloud® cloud for complete control of your system from anywhere.
    An unlimited number of Gateways can be used for wireless control of any size Site.

تثبيت

  1. الخطوة الأولى
    تحديد موقع البوابة
    a. Avoid problem materials and devices.
    The Gateway needs to be able to communicate wirelessly with other Lightcloud Devices. Don’t place the
    Gateway in a metal enclosure, thick concrete or brick rooms. Also, don’t place the Gateway near microwaves, elevator rooms, amplifiers, or other antennas.
    PROBLEM MATERIALSLightcloud LCGATEWAY OFC Office Gateway  - Icon 1PROBLEM DEVICES & SIGNALS
    Lightcloud LCGATEWAY OFC Office Gateway  - Icon 2 ميكروويف
    Lightcloud LCGATEWAY OFC Office Gateway  - Icon 3 ELEVATOR MECHANICAL ROOMS
    Lightcloud LCGATEWAY OFC Office Gateway  - Icon 4 AMPLIFIERS & ANTENNAS

    b. Choose a location that is as close to as many other Lightcloud devices as possible.Lightcloud LCGATEWAY OFC Office Gateway  - Lightcloud*All of the devices don’t have to be within a 100’ of the Gateway, but its ideal to have as many within direct range as possible.

  2. الخطوة الثانية
    Record the Gateway’s Device ID Each Lightcloud device has a unique Device ID for identification that needs to be documented. To document the Device IDs, use one of the following 3 methods.
    a. LC Installer App – Free Scan Device IDs and send information to RAB Download: lightcloud.com/lcinstaller (متاح لنظامي التشغيل iOS وAndroid)Lightcloud LCGATEWAY OFC Office Gateway  - Lightcloud 1b. Device Table – Included with the Gateway
    Attach Device ID stickers to Device Table and complete information.
    Send detailed photos of completed device table to support@lightcloud.com
    Additional Device Tables can be downloaded at lightcloud.com/devicetableLightcloud LCGATEWAY OFC Office Gateway  - Lightcloud 2c. Floor Plan
    Attach the Device Identification sticker to its location on a floor plan, lighting design, or design schedule. Send detailed photos of completed plans to support@lightcloud.com.Lightcloud LCGATEWAY OFC Office Gateway  -Floor Plan
  3. الخطوة الثالثة
    تثبيت البوابة
    a. Place Gateway on a surface or mount Gateway to wall using bracket and 2 supplied screws.
    b. If using ethernet, plug in ethernet cable.
    c. Plug in power cable.
    d. Verify system statusLightcloud LCGATEWAY OFC Office Gateway  - GatewayOnce all LEDs are solid white, you should be able to connect to your Gateway from control.lightcloud.com or the Lightcloud® Mobile App.
    To check ZigBee (Device Mesh) signal strength, press the recessed device button once. A number of LEDs will turn blue indicating how strong the signal is, from 1 to 4, counting from the bottom up.
    حالة الصمام معنى
    All LEDs solid white تشغيل بشكل طبيعي
    All LEDs pulsing white بدء التشغيل
    Some LEDs solid blue ZigBee signal strength
    All LEDs solid red فشل فادح
    All LEDs pulsing red لا يوجد اتصال
    All LEDs pulsing green Gateway is in join mode
  4. الخطوة الرابعة
    Install and Document Other Lightcloud® Devices a. Follow the Device Manuals to wire the other devices for permanent, unswitched power.
    b. As you wire each device, document their Device IDs using the same method you chose to document the Gateway’s Device ID in step 3.
  5. الخطوة الخامسة
    Submit Device Information After wiring and organizing all the devices, submit the device information using the LC Installer App or email photos of the documented device IDs to support@lightcloud.com.
  6. الخطوة السادسة
    انت انتهيت!
    Lightcloud Support will remotely configure the system.

معلومات لجنة الاتصالات الفدرالية:

يتوافق هذا الجهاز مع الجزء 15 من قواعد لجنة الاتصالات الفيدرالية. ويخضع التشغيل للشرطين التاليين:
1. لا يجوز أن يسبب هذا الجهاز تداخلاً ضارًا، و2. يجب أن يقبل هذا الجهاز أي تداخل يتم استقباله، بما في ذلك التداخل الذي قد يتسبب في تشغيل غير مرغوب فيه.
ملحوظة: تم اختبار هذا الجهاز ووجد أنه يتوافق مع حدود الأجهزة الرقمية من الفئة ب وفقًا للجزء 15 الجزء الفرعي ب ، من قواعد لجنة الاتصالات الفيدرالية (FCC). تم تصميم هذه الحدود لتوفير حماية معقولة ضد التداخل الضار في البيئة السكنية. يقوم هذا الجهاز بتوليد واستخدام ويمكن أن يشع طاقة تردد لاسلكي ، وإذا لم يتم تركيبه واستخدامه وفقًا لدليل التعليمات ، فقد يتسبب في حدوث تداخل ضار في الاتصالات اللاسلكية. ومع ذلك ، ليس هناك ما يضمن عدم حدوث تداخل في تثبيت معين. إذا تسبب هذا الجهاز في حدوث تداخل ضار لاستقبال الراديو أو التلفزيون ، والذي يمكن تحديده عن طريق إيقاف تشغيل الجهاز وتشغيله ، فإننا نشجع المستخدم على محاولة تصحيح التداخل بواحد أو أكثر من الإجراءات التالية:
- إعادة توجيه أو تغيير مكان هوائي الاستقبال.
- زيادة المسافة الفاصلة بين الجهاز وجهاز الاستقبال.
- قم بتوصيل الجهاز بمنفذ على دائرة مختلفة عن تلك التي يتصل بها جهاز الاستقبال.
- استشر الوكيل أو فني الراديو/التلفزيون ذي الخبرة للحصول على المساعدة.
To comply with the FCC’s RF exposure limits for general population / uncontrolled exposure, this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in
بالتزامن مع أي هوائي أو جهاز إرسال آخر.
حذر: قد يؤدي إجراء تغييرات أو تعديلات على هذا الجهاز غير المعتمد صراحةً بواسطة RAB Lighting إلى إبطال سلطة المستخدم في تشغيل هذا الجهاز.

شعار لايت كلاود 1

المستندات / الموارد

Lightcloud LCGATEWAY-OFC Office Gateway [بي دي اف] دليل التثبيت
LCGATEWAY-OFC, LCGATEWAY-OFC Office Gateway, Office Gateway, Gateway

مراجع

اترك تعليقا

لن يتم نشر عنوان بريدك الإلكتروني. تم وضع علامة على الحقول المطلوبة *