دليل مستخدم جهاز FOXTECH RDD-25 لتشغيل 4 قنوات

Each unit can carry a maximum payload of 2.5 kg, with a total system payload capacity of 10 kg.
It is suitable for tasks such as fire extinguisher deployment, emergency material delivery, power line stringing, and urgent rescue operations.

شكرا لك على الشراءasing منتجنا.
If you encounter any issues during use, please contact your sales representative promptly.

تنصل

Without prior written permission, no organization or individual may excerpt, copy, or reproduce any part of this manual, nor distribute it in any form.

Due to product updates or other reasons, the contents of this manual may be updated periodically.
This manual is for instructional use only. All statements, information, and recommendations in this manual do not constitute any express or implied warranty.

محتويات الحزمة

اسم	كمية	وحدة
ردد-25	1	تعيين
صندوق التغليف	1	تعيين
Payload Release Hook Rings	12	قِطَع
شهادة المطابقة	1	قطعة

Understanding the 4-Channel Payload Release and Drop Device

تركيب الجهاز

الخطوة 1: Turn the drone upside down and remove the two screws at the bottom of the gimbal mount.
الخطوة 2: Confirm the connection position between the alloy bracket and the drone. To better fit the drone body, the bottom of the alloy bracket is slanted and one side has a groove. During installation, align the bottom of the alloy bracket with the drone body, and ensure the grooved side faces outward.

الخطوة 3: Insert one end of the alloy bracket into the middle of the connection point between the gimbal and the airframe, align the screw holes at both ends of the alloy bracket with the corresponding holes on the airframe, fasten the alloy bracket to the airframe at the gimbal-connection side using the supplied M3*10 screws, and fasten the other end using the supplied M3*8 screws.
الخطوة 4: Connect the mounting plate to the alloy bracket, with the cable outlet facing the nose of the aircraft; adjust the exact mounting position of the plate as needed for actual use, and fasten the mounting plate to the alloy bracket using the supplied M3*8 screws.

الخطوة 5: Connect the device power pickup to the mounting plate power port; ensure the groove on the power pickup aligns with the power port, and after insertion confirm that both quick-release latches have fully popped out before normal use (depending on the purchased version, connect the mounting HUB or the aircraft E-PORT).
- The mounting plate power port must be inserted aligning with the groove on the device power pickup.

الخطوة 6: Insert the connector of the 4-Channel Payload Release and Drop Device into the corresponding E-PORT.
- E-PORT as shown below:
- Connect the plugs as shown in the picture
الخطوة 7: As shown in the figure, manually press the hook control button to set the hook into standby release mode. After that, attach the matching metal ring to the payload and hang it on the hook.

تشغيل الجهاز

PSDK Button: Single click to open/close the 4-Channel Payload Release and Drop Device operation menu

Operation Button Description

Payload Control

Open the Payload settings; you can also operate the 4-Channel Payload Release and Drop Device through this menu (tap the menu icon in the upper-right corner of the remote controller to enter Payload settings).

Display real-time data switch: Show/Hide the working status and detailed information of the 4-Channel Payload Release and Drop Device

Single click to unlock/lock; after unlocking, the device can operate normally

Hook 1: Single click to release
Hook 2: Single click to release
Hook 3: Single click to release
Hook 4: Single click to release
One-key all-release switch: Single click to release

استكشاف الأخطاء وإصلاحها

1	No PSDK control icon	1. Check whether the wiring is correct. For the M350 version, plug into the top E-PORT of the aircraft and pay attention to the connector orientation. For the M300 version, connect to the supplied adapter ring and plug into the gimbal. For the visual version, connect the Type-C cable to the visual module and install the visual module on the gimbal. 2. Check the drone and remote controller firmware; they must be updated to the latest version.
2	Incomplete PSDK icon display	1. Close the Pilot2 flight app in the background and re-enter, or restart. 2. Check the drone and remote controller firmware; they must be updated to the latest version.

Device External Interfaces

واجهات الأجهزة: None for third-party hardware
Software Protocol Interfaces: لا أحد

المواصفات الفنية

أبعاد المنتج 125 مم × 117 مم × 60 مم
وزن المنتج 330 جرام
نوع الواجهة SKYPORTV2 / E-PORT / Type-c
طريقة التحكم PSDK
طاقة النظام 20 واط
درجة حرارة التشغيل -200 درجة مئوية إلى 600 درجة مئوية
عدد القنوات 4
وضع التحكم Independent channel control; select any hook number or one-key all release
نطاق التحكم Same as drone communication range
ملاحظات الحالة Real-time feedback for each channel
طريقة التركيب Quick-detach buckle
Supported Hub نعم
سعة الحمولة 2.5kg per channel

الأسئلة الشائعة

Q: What is the maximum payload capacity of each unit?

A: Each unit of the RDD-25 device can carry a maximum payload of 2.5 kg.

Q: What are some common applications of the RDD-25 device?

A: The RDD-25 device is suitable for tasks such as fire extinguisher deployment, emergency material delivery, power line stringing, and urgent rescue operations.

Q: Can the RDD-25 system be used for simultaneous payload release?

A: No, the RDD-25 system triggers the four payload release units sequentially.

المستندات / الموارد

FOXTECH RDD-25 4 Channel Playload [بي دي اف] دليل المستخدم
RDD-25, RDD-25 4 Channel Playload, RDD-25, 4 Channel Playload, Playload

مراجع

دليل المستخدم

FOXTECH RDD-25 4 Channel Playload

تحديد

المنتج انتهىview