FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productتحديد

  • اسم المنتج:
    مجموعة FlySpark F4 V1 BLS 60A
  • ميزات الذكاء الاصطناعي:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • دعم البرمجيات:
    Betaflight، INAV، Ardupilot، EMU-flight، SkyBrush
  • ESC Communication:
    BLHeli_S بلوتوث و USB-C
  • الاتصال:
    شنومكس-شنومكس يبو
  • البعد:
    47.8 مم (طول) × 47.5 مم (عرض) × 18.3 مم (ارتفاع)
  • التركيب:
    30.5 × 30.5 مم مع حجم ثقب 4 مم
  • وزن:
    34 جرام

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

تعليمات استخدام المنتج

وحدة تحكم الطيران FlySpark F4 V1

تَخطِيط:
Refer to the user manual for the layout of the flight controller.

الاتصال المحيطي:
Connect peripherals as per the provided diagram.

تكوين التطبيق و FC:
Use the recommended apps and follow the configuration instructions.

تحديث البرامج الثابتة لـ FC:
Connect the flight controller to a PC via USB for firmware updates.

وحدة تحكم السرعة الإلكترونية FLYSPARK BLS 60A 4 في 1

تَخطِيط:
Check the layout guide in the manual for proper installation.

التوصيل بالمحركات وكابل الطاقة:
Connect motors and power cables securely.

تكوين ESC:
Use the FlySpark app for ESC configuration settings.

تحديث البرنامج الثابت ESC:
Follow the provided steps to update the firmware for ESC.

مجموعة FlySpark F4 V1 BLS 60AFlySpark-F4-V1-Stack-Flight-Controller-fig-1

المواصفات انتهتviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

طَردFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35V 1000 فائق التوهج منخفض ESR مكثف × 1
  • M3 صامولة نايلون × 4
  • كابل SH 1.0 مم بطول 25 مم و8 دبابيس (لتوصيل FC-ESC) × 1 كابل SH 1.0 مم بطول 75 مم و6 دبابيس* × 1
  • مسامير داخلية M3 * 30 مم × 4
  • كابل DJI 6pin (80 مم) × 1
  • كابل الطاقة XT60 (100 مم) × 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

مخطط اتصال FCFlySpark-F4-V1-Stack-Flight-Controller-fig-6

دليل اتصالات FC وESC

الطريقة 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

الطريقة 2:

اللحام المباشر

  • قم بلحام 8 أسلاك إلى 8 وسادات على كل طرف، باتباع تعريفات الوسادات أدناهFlySpark-F4-V1-Stack-Flight-Controller-fig-8

مواصفات وحدة التحكم في الطيران

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • استخدم كابل ذو 6 سنون يأتي مع وحدة الهواء O3 FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • استخدم كابلًا مكونًا من 6 دبابيس يأتي مع مجموعة FlySpark F4 V1 BLS 60A

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an exampليه.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

ملحوظة:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

الاتصال مع المحركات وكابل الطاقةFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

تحديث البرامج الثابتة ESC
يأتي هذا المتحكم الإلكتروني 8 بت 50 أمبير مزودًا مسبقًا ببرنامج BLHeliS، ويمكن أيضًا تثبيته على برنامج Bluejay، مما يوفر ترشيحًا لسرعة الدوران (RPM) ودعمًا لتقنية Dshot ثنائية الاتجاه. اتبع الخطوات التالية لتحديث البرنامج الثابت:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. الاتصال بالكمبيوتر الشخصي:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

تحذيرات:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

الأسئلة الشائعة

كيف أقوم بتحديث البرامج الثابتة ESC؟

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

المستندات / الموارد

FlySpark F4 V1 Stack Flight Controller [بي دي اف] دليل المستخدم
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

مراجع

اترك تعليقا

لن يتم نشر عنوان بريدك الإلكتروني. تم وضع علامة على الحقول المطلوبة *