دليل مستخدم AtomStack Swift F03-0329-0AA1

AtomStack F03-0329-0AA1 Swift

تحديد

• اسم المنتج: AtomStack Swift
• رقم الموديل: F03-0329-0AA1
• إصدار: B
• مدخلات الطاقة: تيار مستمر 24 فولت
• الموانئ: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• مؤشر الحالة: Solid blue when working

تعليمات استخدام المنتج

قائمة الأجزاء:

• تجميع المحور X
• Left Y-axis assembly (with motor)
• Right Y-axis assembly
• محول الطاقة
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

قائمة الأجزاء

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   ملحوظة: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.ملحوظة:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

طريقة التركيز:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

نصيحة:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

طريقة تنزيل برامج الكمبيوتر:
رابط تحميل AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. مسح ضوئي للتنزيل

موارد البرمجيات

حرق خفيف
Unofficial software. Requires a separate purchase

طريقة تحميل برنامج Lightburn: رابط التحميل: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. افتح برنامج LightBurn، ثم حدد: الأجهزة - استيراد
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

ملحوظة: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

دليل المستخدم

اتصل بنا

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• استكشاف الأخطاء وإصلاحها
• صيانة

خدمة العملاء:

• For the detailed warranty policy, please visit our official webموقع: www.atomstack.com
• للدعم الفني والخدمة ، يرجى إرسال بريد إلكتروني إلى: support@atomstack.com

الشركة المصنعة:
شركة Shenzhen AtomStack Technologies Co.، Ltd.

الرمز البريدي: 518172

عنوان:
الطابق 17، المبنى 3A، المرحلة الثانية، الحديقة الذكية، رقم 76، شارع باوهي، شارع باولونج، منطقة لونغجانج، شنتشن، قوانغدونغ، الصين.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

التعليمات