1. انتهى المنتجview
The STARTRC Drone Airdrop System is designed specifically for the DJI Mini 5 Pro drone, integrating both propeller guard and payload deployment functionalities. This device allows for controlled release of lightweight items during flight, enhancing the drone's utility for various applications.
The system utilizes the drone's auxiliary lights for deployment control, offering a seamless and extended range operation.
Image 1.1: The STARTRC Drone Airdrop System mounted on a DJI Mini 5 Pro drone.
2. محتويات العبوة
تأكد من وجود جميع المكونات في العبوة:
- STARTRC Drone Airdrop System Unit
- Propeller Restraint Assembly
- كابل الشحن (النوع C)
- دليل التعليمات (هذا المستند)
3. الإعداد والتثبيت
Follow these steps to correctly install the airdrop system on your DJI Mini 5 Pro drone:
- Prepare the Propeller Restraint Assembly: Pull the orange buttons on both sides of the propeller restraint assembly to open its stand.
- Attach the Assembly to the Drone: Slide both bracket sections of the propeller restraint assembly through the sides of the drone's body and snap them into place. Ensure a stable fit that prevents wobbling or loosening. This assembly does not obstruct the drone's visual positioning sensors.
- Align the Light Attachment: The light attachment on the airdrop system must align with the drone's light unit. Ensure both the upper and lower brackets are fully engaged.
- Install the Dispenser Module: Install the dispenser module into the bracket as shown in the accompanying image.
- Adjust the Hook: Check and use the side button on the dispenser module to adjust the hook so that it faces upward, ready to hold the payload.
- Attach Payload: Attach the payload to the drone using a rope and position it at the rear of the drone. The combined weight of the deployer and propeller restraint assembly is approximately 49g.
Image 3.1: Step-by-step installation guide for the airdrop system.
Important: The maximum load capacity for both loaded and dropped items is approximately 60g. Exceeding this limit may affect drone flight performance and safety.
4. تعليمات التشغيل
The airdrop system's deployment is controlled via the DJI remote controller by utilizing the drone's auxiliary lights. This photo-sensitive setting allows for precise control over item release.
4.1. Remote Control Setup (DJI RC 2 / RC N2)
To enable deployment, you need to configure a custom button on your DJI remote controller to activate the auxiliary light. The following video demonstrates this process for both RC 2 and RC N2 remote controllers.
Video 4.1: Instructions for configuring remote control buttons to activate the auxiliary LED for payload release.
4.2. Deployment Procedure
- Ensure the airdrop system is properly installed and the payload is securely attached (within the 60g limit).
- Power on your DJI Mini 5 Pro drone and remote controller.
- Fly the drone to the desired deployment location.
- Activate the drone's auxiliary lights using the configured button on your remote controller. Activating the auxiliary lights initiates deployment.
- Deactivating the auxiliary lights concludes the deployment.
The deployment range matches the drone's remote control distance, offering extensive operational flexibility.
Image 4.2: Visual representation of the airdrop system's working principle.
Image 4.3: Illustration of the extended deployment range using the drone's auxiliary lights.
Video 4.4: Demonstration of the drone airdrop system in action, showing payload delivery.
5. الصيانة
Proper maintenance ensures the longevity and reliable operation of your airdrop system.
5.1. شحن الوحدة
The airdrop system has a built-in 70mAh battery. To charge:
- Connect the provided Type-C charging cable to the charging port on the unit.
- Connect the other end of the cable to a standard USB power source (e.g., computer, wall adapter).
- A full charge takes approximately half an hour.
- After a full charge, the unit can be used approximately 400 times.
Image 5.1: Product details showing the Type-C charging port.
5.2. التنظيف والتخزين
- Wipe the unit with a soft, dry cloth after use.
- تجنب التعرض لدرجات الحرارة القصوى أو الرطوبة.
- قم بتخزين الوحدة في مكان بارد وجاف عند عدم استخدامها.
6. استكشاف الأخطاء وإصلاحها
This section addresses common issues you might encounter with the STARTRC Drone Airdrop System.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Airdrop system does not deploy. |
|
|
| Payload does not release smoothly. |
|
|
| System feels loose on the drone. |
|
|
7. المواصفات
| ميزة | التفاصيل |
|---|---|
| ماركة | ستارترك |
| اسم الموديل | Airdrop System for Mini 5 Pro |
| رقم الموديل | KYF-12030145 |
| التوافق | دي جي اي ميني 5 برو |
| Item Weight (System + Restraint) | 49 جرام (تقريبا) |
| الحد الأقصى لسعة التحميل | 60 جرام |
| سعة البطارية | 70 مللي أمبير |
| وقت الشحن | حوالي 0.5 ساعات |
| Uses per Charge | حوالي 400 مرة |
| نوع التحكم | Remote Control (via drone auxiliary light) |
| مادة | ABS+PC |
| أبعاد العنصر (الطول × العرض × الارتفاع) | 5.28 بوصة طول × 1.42 بوصة عرض × 2.88 بوصة ارتفاع |
Image 7.1: Maximum load capacity illustration.
8. إرشادات السلامة
- Always ensure the payload weight does not exceed 60g. Overloading can compromise drone stability and flight safety.
- Before each flight, verify that the airdrop system is securely attached to the drone and the payload is properly fastened.
- Avoid flying in strong winds or adverse weather conditions when carrying a payload.
- Operate the drone responsibly and in accordance with local aviation regulations.
- Do not drop items over people, animals, or property that could be damaged.
- Ensure the payload string is not excessively long or prone to entanglement with propellers.
9. الضمان والدعم
For warranty information or technical support, please refer to the official STARTRC website or contact their customer service directly. Specific warranty terms and support contacts may vary by region.
يرجى الاحتفاظ بإثبات الشراء الخاص بك لاستخدامه في أي مطالبات بالضمان.