دليل تعليمات رافعة كاتول ذات 4 أعمدة سعة 9500 رطل، طراز 4H950

1. المقدمة

Thank you for choosing the KATOOL 9500lbs 4 Post Lift, Model 4H950. This manual provides essential information for the safe installation, operation, and maintenance of your new vehicle lift. Please read this manual thoroughly before attempting to assemble or operate the lift. Proper understanding and adherence to these instructions will ensure safe and efficient use, extending the lifespan of your equipment.

Figure 1.1: KATOOL 9500lbs 4 Post Lift, Model 4H950.

2. معلومات السلامة

Your safety and the safety of others are paramount. Always follow basic safety precautions when operating this equipment. Failure to do so may result in serious injury or property damage.

• Read and understand all instructions before operating the lift.
• تأكد من تركيب المصعد على أساس خرساني مستوٍ وصلب قادر على تحمل وزن المصعد وحمولته القصوى.
• Only trained and authorized personnel should operate the lift.
• حافظ على منطقة العمل نظيفة ومضاءة جيدًا.
• Do not exceed the maximum lifting capacity of 9,500 lbs.
• Always engage safety locks before working under a raised vehicle.
• Ensure proper vehicle positioning on the runways.
• أبقِ يديك وقدميك وملابسك بعيدة عن الأجزاء المتحركة.
• Never leave a raised vehicle unattended without engaging safety locks.
• ارتدِ معدات الحماية الشخصية المناسبة.
• افصل الطاقة قبل إجراء أي صيانة أو إصلاحات.

3. محتويات العبوة

The KATOOL 9500lbs 4 Post Lift package includes the following components:

• 4 Post Lift Structure (Posts, Runways, Crossbeams)
• Moving Kits/Casters (for mobility)
• ألومنيوم آرamps (for vehicle access)
• Jack Tray (for use with optional jacking beam)
• Drip Trays (to protect vehicles parked underneath)
• Hydraulic Power Unit (110V)
• الكابلات والبكرات
• Fasteners and Hardware

Figure 3.1: All included components in the KATOOL 4 Post Lift package.

4. المواصفات

Key technical specifications for the KATOOL 9500lbs 4 Post Lift Model 4H950:

الشكل 4.1: مخطط مواصفات المنتج وأبعاده.

5. الإعداد والتثبيت

Proper installation is critical for the safe and reliable operation of your KATOOL 4 Post Lift. It is recommended that installation be performed by at least two individuals with appropriate tools and equipment.

5.1 تجهيز الموقع

• Ensure the installation area has a level concrete floor, free from cracks or defects, capable of supporting the lift's weight and maximum load. Consult a structural engineer if unsure.
• Verify adequate overhead clearance for the lift's maximum height (79 inches) plus the height of the vehicle.
• Ensure access to a dedicated 110V power outlet for the hydraulic power unit.

5.2 Unloading and Component Identification

The lift components are heavy. A forklift or similar heavy lifting equipment is required for unloading the shipment. Carefully unpackage all components and verify against the package contents list. Identify each part before beginning assembly.

5.3 خطوات التجميع (عامة)view)

1. المشاركات الموقف: Carefully position the four posts according to the desired layout, ensuring they are square and level.
2. Attach Crossbeams: Secure the crossbeams to the posts. This step often requires lifting the crossbeams into place.
3. Install Runways: Attach the runways to the crossbeams. Ensure proper alignment and secure all fasteners.
4. كابلات الطريق: Install the lifting cables, routing them through the pulleys and securing them according to the detailed diagrams provided in the full assembly manual. Ensure cables are properly tensioned.
5. Connect Hydraulic System: Mount the hydraulic power unit and connect the hydraulic lines to the lift cylinder. Fill the reservoir with appropriate hydraulic fluid.
6. Install Safety Locks: Ensure all safety lock mechanisms are correctly installed and functional.
7. إرفاق الملحقات: Install the aluminum ramps, jack tray, drip trays, and casters as needed.

Figure 5.1: The KATOOL 4 Post Lift supporting two vehicles, showcasing its 9500lbs capacity and 79-inch lifting height.

Figure 5.2: Detail of the lift's safety lock mechanism.

Figure 5.3: Detail of the cable routing system.

Figure 5.4: The 110V hydraulic power unit.

6. تعليمات التشغيل

Follow these steps for safe operation of your KATOOL 4 Post Lift:

6.1 قائمة التحقق قبل التشغيل

• Ensure the lift area is clear of obstructions.
• Verify all fasteners are tight and cables are properly tensioned.
• تحقق من مستوى سائل الهيدروليك.
• Confirm power supply is connected.

6.2 رفع المركبة

1. تحديد موقع المركبة: Drive the vehicle onto the runways, ensuring it is centered and within the designated lifting points.
2. ثصلقثصل: Ensure no personnel or objects are near the lift's moving parts.
3. Initiate Lift: Press and hold the 'UP' button on the hydraulic power unit. The lift will begin to rise.
4. قم بتفعيل أقفال الأمان: Once the desired height is reached, or if working under the vehicle, lower the lift slightly until the safety locks engage. Listen for the audible click.
5. Verify Locks: Visually confirm that all four safety locks are fully engaged before working under the vehicle.

Figure 6.1: KATOOL 4 Post Lift in operation, showing a vehicle raised to working height.

6.3 خفض المركبة

1. ثصلقثصل: Ensure no personnel or objects are under or near the lift.
2. ارفع قليلاً: Press the 'UP' button briefly to relieve pressure on the safety locks.
3. Disengage Locks: Operate the safety lock release mechanism (typically a lever or button).
4. Lower Lift: Press and hold the 'DOWN' button or lever to slowly lower the lift.
5. Remove Vehicle: Once the lift is fully lowered, carefully drive the vehicle off the runways.

7. الصيانة

Regular maintenance is essential for the longevity and safe operation of your KATOOL 4 Post Lift.

• يوميًا: Inspect cables, pulleys, and safety locks for wear or damage. Check for hydraulic fluid leaks.
• أسبوعي: Clean the lift structure. Check and lubricate all pivot points and moving parts.
• شهريا: Check cable tension and adjust if necessary. Inspect all fasteners for tightness. Check hydraulic fluid level and top up if needed.
• سنويا: Have a qualified technician perform a thorough inspection of the entire lift system, including hydraulic components, electrical connections, and structural integrity.

8. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your KATOOL 4 Post Lift.

8.1 Lift Does Not Rise

• التحقق من الطاقة: Ensure the power unit is plugged in and receiving 110V power. Check circuit breaker.
• السائل الهيدروليكي: Verify the hydraulic fluid level is adequate.
• وظيفة المحرك: Listen for the motor running. If not, check electrical connections.

8.2 Lift Lowers Unevenly

• شد الكابل: Inspect and adjust cable tension on all four posts to ensure they are uniform.
• العوائق: Check for any obstructions preventing smooth lowering.

8.3 Safety Locks Not Engaging/Disengaging

• فحص الآلية: Inspect the safety lock mechanism for any debris, damage, or misalignment.
• Cable/Linkage: Ensure the release cables or linkages are free-moving and properly connected.

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact KATOOL customer support.

9. الضمان والدعم

KATOOL stands behind the quality of its products. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your purchase or visit the official KATOOL website. For technical assistance, parts, or any other support inquiries, please contact KATOOL customer service through the contact information provided with your product or on the manufacturer's webموقع.

When contacting support, please have your model number (4H950) and purchase date readily available.