PYY Lapidary Saw Model PYYTJHC96011YEUSSP04 Instruction Manual

1. المقدمة

This manual provides comprehensive instructions for the safe and efficient operation and maintenance of your PYY Lapidary Saw. Please read this manual thoroughly before initial use and retain it for future reference. This device is designed for precision cutting and polishing of various materials including wood, acrylic, small stones, jade, plastic, aluminum, chrome, and precious metals.

2. معلومات السلامة

Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury or damage to the equipment.

• ارتدِ معدات الحماية الشخصية المناسبة، بما في ذلك نظارات السلامة والقفازات وحماية السمع.
• تأكد من أن منطقة العمل نظيفة ومضاءة جيدًا وخالية من العوائق.
• Secure the saw to a stable work surface using the fixed holes provided to prevent slips, vibrations, and accidents.
• Keep hands and fingers clear of the blade and moving parts during operation.
• افصل الطاقة قبل إجراء أي تعديلات أو صيانة أو عند تغيير الشفرات.
• Do not operate the saw if any parts are damaged or missing.
• Ensure proper ventilation, especially when cutting materials that may produce dust or fumes.
• The maximum thickness of stone that can be cut is 35mm. Do not exceed this limit.

3. محتويات العبوة

تأكد من وجود جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

• PYY Lapidary Saw Base Unit
• Woodworking Saw Blade
• Jade Cutting Disc (Diamond Blade)
• غطاء شفرة
• Pusher Angle Ruler
• Fiber Wheel
• مغزل
• صفيحة الضغط
• وجع
• مضخة مياه
• Cooling Pipe (Serpentine Water Pipe)
• عمود مرن
• Handle for Flexible Shaft
• 1.5-10mm Drill Clamp
• مفتاح تشاك
• Carbon Brush (Spare)
• Fiber Wheel Connecting Rod
• Cloth Wheel Sink Rod
• حوض

Figure 1: All included accessories for the PYY Lapidary Saw.

4. تعليمات الإعداد

Follow these steps to assemble and prepare your PYY Lapidary Saw for operation.

4.1. Blade Installation (Woodworking Saw Blade or Jade Cutting Disc)

1. تأكد من فصل المنشار عن مصدر الطاقة.
2. Carefully place the desired blade (woodworking saw blade or jade cutting disc) onto the motor shaft.
3. Use the provided wrench to securely tighten the blade in place. Ensure it is firmly seated and does not wobble.
4. Install the blade cover over the blade, ensuring it is properly aligned and secured.
5. Install the pusher angle ruler onto the table, sliding it into the designated track.

4.2. Fiber Wheel Installation

1. Insert the fiber wheel onto the spindle.
2. Place the pressure plate onto the spindle, securing it with a screw.
3. Attach the assembled spindle with the fiber wheel onto the base unit's left shaft.
4. Secure it firmly with a screw.

4.3. Flexible Shaft Installation

1. Attach the flexible shaft onto the base unit's left shaft and secure it with a screw.
2. Lock the flexible shaft into the handle.
3. Connect the flexible shaft to the cooling pipe.

4.4. Wet Sawing Setup

1. Place the water pump into a container of water (e.g., the provided sink).
2. Ensure the cooling pipe is positioned to direct water onto the cutting area.
3. Adjust the cooling pipe switch to control the water flow during operation.

5. تعليمات التشغيل

This section details the operation of your PYY Lapidary Saw for various tasks.

5.1. التشغيل والتحكم في السرعة

• Plug the saw into a standard 110V power outlet.
• قم بتحويل مفتاح الطاقة إلى وضع التشغيل.
• Use the front dial to adjust the motor speed from 0 to 10,000 RPM. Start at a lower speed and gradually increase as needed for the material being worked on.

Figure 2: The speed control dial and power switch for precise operation.

5.2. عمليات القطع

• Select the appropriate blade for your material (woodworking blade for wood/plastic, diamond blade for stone/metal).
• For wet cutting (stone, jade), ensure the water pump and cooling pipe are set up and providing a steady stream of water to the blade.
• Position the material against the pusher angle ruler for accurate cuts.
• Slowly and steadily feed the material into the rotating blade. Do not force the material, as this can cause kickback or damage the blade/motor.
• Maintain a firm grip on the material and keep hands away from the blade.
• The maximum cutting thickness for stone is 35mm.

Figure 3: Wet cutting function with the water cooling system in operation.

Figure 4: The upgraded diamond blade allows for cutting a variety of materials.

5.3. Polishing and Grinding

• Attach the fiber wheel to the left shaft as described in the setup section.
• Turn on the saw and adjust the speed as appropriate for polishing or grinding.
• Gently press the material against the rotating fiber wheel to polish or grind.

Figure 5: Versatile tool functions including burnishing, abrasion, carving, and wet sawing.

5.4. Using the Flexible Shaft for Carving/Engraving

• Ensure the flexible shaft is correctly installed and connected to the handle.
• Insert the desired carving or engraving bit into the 1.5-10mm drill clamp on the flexible shaft handle. Tighten with the chuck key.
• Turn on the saw and adjust the speed. The flexible shaft allows for intricate work on smaller pieces.

6. الصيانة

Regular maintenance ensures the longevity and optimal performance of your PYY Lapidary Saw.

• Always unplug the saw before cleaning or performing maintenance.
• Clean the saw after each use, removing any dust, debris, or slurry from the table, blade guard, and motor housing.
• Inspect blades for wear or damage. Replace dull or damaged blades promptly.
• Check the cooling pipe and water pump for blockages or leaks. Clean as necessary.

6.1. Replacing the Motor Carbon Brush

1. تأكد من فصل المنشار عن التيار الكهربائي.
2. Locate the carbon brush covers on the motor housing.
3. Use a screwdriver to remove the cover and extract the worn carbon brush.
4. Insert a new carbon brush into the housing and secure the cover.

7. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your PYY Lapidary Saw.

8. المواصفات

9. الضمان والدعم

PYY offers a one-year coverage for this product. For any issues or technical assistance, please contact our professional one-on-one technical support. Refer to your purchase documentation for contact details.