دليل مستخدم محول الطاقة الشمسية PowMr 10200W

1. المقدمة

The PowMr 10200W Solar Inverter is a high-capacity, off-grid pure sine wave inverter designed for reliable power conversion from 48V DC to 220-230V AC. It integrates a 160A MPPT charge controller, supporting a maximum PV array power of 5400W. This versatile unit is suitable for various applications including homes, cabins, RVs, boats, and off-grid backup systems. It is compatible with both 48V lead-acid (Seal, AGM, Gel, Flooded) and lithium batteries.

Key features include dual PV input for uninterrupted power supply, dual AC output delivering up to 10200W, and multiple charging and output modes to optimize energy management. The inverter also incorporates comprehensive 360° safety protection against short-circuit, over/under-voltage, overload, and backfeed. An intuitive RGB light system indicates the current working mode of the inverter.

Figure 1: PowMr 10.2KW Hybrid Solar Inverter highlighting key specifications like 10.2KW AC output, 160A Max AC Charging Current, 500Vdc Max PV Array Open Circuit Voltagجهد بدء التشغيل 150 فولتtage، واستهلاك الطاقة بدون حمل 75 واط.

2. الإعداد والتثبيت

Proper installation is crucial for the safe and efficient operation of your PowMr Solar Inverter. Ensure all connections are secure and follow local electrical codes.

2.1 فك الصندوق والمكونات

Upon unboxing, verify that all components are present as listed in the packing list. The package typically includes the 10200W 220VAC Solar Inverter, an instruction manual, MC4 connectors, ring terminals, and other accessories.

2.2 توصيلات الأسلاك

Follow these steps for wiring the inverter. Always ensure the system is de-energized before making any connections.

1. توصيل البطارية: Connect the 48V battery first. Ensure proper polarity (+ to + and - to -).
2. اتصال إدخال التيار المتردد: Connect the AC input wires (Live, Neutral, Ground) from your utility grid or generator to the designated AC input terminals.
3. اتصال مخرج التيار المتردد: Connect your AC loads to the main AC output terminals. The inverter supports dual AC outputs.
4. اتصال مدخل الطاقة الكهروضوئية: Connect the solar panel array to the PV input terminals. Ensure correct polarity and voltage within the specified range (Max PV Array 5400W, Max PV Input VOC: 500V DC).

Figure 2: Diagram illustrating the dual MPPT input for solar panels, supporting a maximum PV array power of 10200W and MAX PV Input of 500VDC.

2.3 حماية السلامة

The inverter features 360° safety protection, including short-circuit, over/under-voltage, overload, and backfeed protection. Always ensure proper grounding and use appropriate circuit breakers for all connections.

Figure 3: Visual representation of the inverter's 360° protection, including short circuit, over current, over voltagه ، تحت المجلدtagحماية من الحمل الزائد، والارتداد، وارتفاع درجة الحرارة، والشحن الزائد.

3. تعليمات التشغيل

The PowMr Solar Inverter offers flexible operating modes to suit various energy needs.

3.1 أوضاع شحن متعددة

The inverter supports three optional charging modes:

• Solar First (CSO): يعطي الأولوية للطاقة الشمسية للشحن.
• Solar & Utility (SNU, default): يستخدم كلاً من الطاقة الشمسية والطاقة الكهربائية للشحن.
• Only Solar (OSO): يتم شحنها حصرياً من الطاقة الشمسية.

3.2 أوضاع إخراج

Three output modes are available to ensure uninterrupted power:

• الطاقة الشمسية أولاً: إعطاء الأولوية للطاقة الشمسية للأحمال.
• الأطباق الرئيسية أولاً: إعطاء الأولوية لشبكة الطاقة للمرافق العامة للأحمال.
• أولوية SBU: إعطاء الأولوية للطاقة الشمسية، ثم البطارية، ثم المرافق للأحمال.

3.3 مؤشرات ضوئية RGB

The PowMr Hybrid Inverter's logo displays different colors to indicate its working mode:

• الضوء الأبيض: الوضع الثابت
• ضوء بنفسجي: الوضع الكهروضوئي
• الضوء الأحمر: وضع البطارية
• الضوء الأزرق: وضع الأداة المساعدة

3.4 Dual Output Functionality

The inverter features dual AC outputs. In areas with frequent power outages, you can set a higher battery voltage for critical loads to retain more power for use in the event of a blackout. When the battery voltage falls below a set value, the main load port stops working, and only the second load port remains active. When the battery voltage is higher than the set value, the main load port operates again.

4. الصيانة

Regular maintenance ensures the longevity and optimal performance of your solar inverter. Keep the inverter clean and free from dust. Periodically check all wiring connections for tightness and signs of wear or corrosion. Ensure adequate ventilation around the unit to prevent overheating. Refer to the full instruction manual for detailed maintenance procedures and schedules.

5. استكشاف الأخطاء وإصلاحها

If you encounter issues with your inverter, consult the troubleshooting section of the comprehensive manual for common problems and solutions. Basic troubleshooting steps often involve checking connections, verifying battery and PV voltages, and observing error codes displayed on the LCD screen. For persistent issues, contact customer support.

6. المواصفات

7. الضمان والدعم

PowMr is committed to providing excellent after-sales support. For any inquiries, technical assistance, or warranty claims, please refer to the contact information provided in your product packaging or visit the official PowMr webتأكد من أن لديك رقم طراز المنتج وتفاصيل الشراء جاهزة عند الاتصال بالدعم.