1. المقدمة
This manual provides essential instructions for the safe installation, operation, and maintenance of your Ranein 2.5-Gallon Mini Tank Electric Water Heater. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of your water heater.
Image: The Ranein 2.5-Gallon Mini Tank Electric Water Heater, a compact unit designed for point-of-use hot water.
2. معلومات السلامة
Your safety and the safety of others are paramount. This water heater is equipped with multiple safety features. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury.
- يوصى بالتركيب الاحترافي: Installation should be performed by a qualified plumber or electrician in accordance with all local codes and regulations.
- السلامة الكهربائية: Ensure the unit is properly grounded. Do not operate if the power cord is damaged.
- ضغط الماء: Do not exceed the maximum rated water pressure of 150 PSI. A pressure relief valve is included and must be installed.
- إعدادات درجة الحرارة: Be aware that water temperatures above 125°F (52°C) can cause severe burns or scalding. Adjust the thermostat carefully.
- Dry-Burn Protection: The unit includes dry-burn protection, which automatically shuts off heating if the tank is empty.
- تصنيف IPX4 للماء: Provides protection against splashing water.
- كشف التسرب: The system is designed with rapid leak detection for enhanced safety.
Image: Diagram illustrating the multiple protection features of the Ranein water heater, including high temperature, corrosion, high pressure, dry burning, IPX4 waterproof, and leakage resistance.
3. مواصفات المنتج
The Ranein 2.5-Gallon Mini Tank Electric Water Heater is designed for efficient and convenient hot water supply at the point of use. Key features include:
- الماء الساخن الفوري: 1440W, 120V mini tank heater provides immediate hot water, eliminating waiting times for kitchen sinks, utility basins, bathrooms, RVs, and cabins.
- درجة حرارة قابلة للتعديل: Customize water temperature from 68°F to 149°F (20°C to 65°C).
- بناء متين: Features a premium 304 stainless steel inner tank for corrosion resistance, scale buildup prevention, and high-pressure wear, outlasting standard enamel glass-lined tanks. Includes a reinforced welded structure and magnesium anode rod.
- Triple-Layer Heat Retention: Advanced insulation system with enamel coating, high-density foam, and reinforced steel housing reduces standby heat loss by up to 30%, ensuring 99% heating efficiency.
- 6-Level Safety Protection: Incorporates an adjustable thermostat, over-temperature safeguard (up to 185°F/85°C), high-pressure resistance (up to 150 PSI), dry-burn protection, IPX4 waterproof rating, and rapid leak detection.
- التثبيت متعدد الاستخدامات: Compact design allows for wall, floor, or under-sink mounting with standard 1/2" NPT connections. Plugs into a standard 120V outlet.
Image: Visual representation of key features including 1440W fast heating, intelligent constant temperature, easy installation, and 6 safety protections.
Image: Diagram highlighting the 3D foam insulation layer for high material density, one-piece foaming technology, sealed and leak-proof design, high temperature resistance, and long-lasting heat preservation.
4. مواصفات المنتج
| مواصفة | قيمة |
|---|---|
| ماركة | رنين |
| رقم الموديل | RC25G-W |
| سعة | 2.5 جالون |
| واتtage | 1440 واط |
| المجلدtage | 120 فولت |
| أبعاد المنتج (العرض × الارتفاع) | 13.39 بوصة × 13.39 بوصة |
| عمق العنصر | 11.42 بوصة |
| وزن العنصر | 17.63 رطل |
| أقصى ضغط للمياه | 150 رطل/بوصة مربعة |
| درجة مقاومة للماء | IPX4 |
| نوع التركيب | Floor, Under Sink, Wall |
| لون | أبيض |
Image: Detailed product parameters including capacity, voltagالطاقة، أقصى ضغط للماء، الوزن، ampمقاوم للماء.
5. محتويات العبوة
تأكد من وجود كافة المكونات قبل البدء في التثبيت:
- Ranein 2.5-Gallon Mini Tank Electric Water Heater Unit
- Pressure Relief Valve (T/P Valve)
- خراطيم المياه (2)
- تزايد شريحة
- براغي التثبيت والمراسي
- خرطوم التصريف
- شريط التيفلون
6. التثبيت
This section outlines the steps for installing your Ranein Mini Tank Electric Water Heater. For safety and proper function, it is highly recommended that installation be performed by a qualified professional.
6.1 إرشادات التثبيت العامة
- Choose a location that is protected from freezing temperatures and is close to the point of use to minimize heat loss.
- Ensure adequate clearance around the unit for maintenance and air circulation. Refer to the 'Please Confirm Your Under-sink Space' image for minimum clearances if installing under a sink.
- The unit can be mounted on a wall, placed on the floor, or on a shelf.
Image: Diagram showing minimum space requirements for under-sink installation, with 5 inches above and 2 inches on either side of the unit.
6.2 توصيل المياه
- قم بإغلاق مصدر المياه الرئيسي.
- Apply Teflon tape to the threads of the pressure relief valve (T/P valve) and install it into the hot water outlet (red marked port) on top of the water heater. Tighten with a wrench.
- Connect the flexible water hoses to the hot water outlet (from T/P valve) and cold water inlet (blue marked port) on the water heater. Ensure connections are tight to prevent leaks.
- Connect the other ends of the flexible hoses to your hot and cold water lines. The hot water line from the heater connects to the hot water faucet, and the cold water line from the main supply connects to the cold water inlet of the heater.
- Attach the drain hose to the T/P valve's discharge port. Route the drain hose to an open drain or suitable discharge area.
- Slowly turn on the main water supply and check for leaks. Open a hot water faucet to allow air to escape from the tank until water flows steadily.
Video: A detailed installation guide for the Ranein Mini Tank Water Heater, demonstrating water connections and mounting.
6.3 التوصيل الكهربائي
- Ensure the water heater is filled with water before connecting to power.
- Plug the water heater's power cord into a standard 120V grounded electrical outlet.
- لا تستخدم أسلاك تمديد أو محولات.
6.4 خيارات التركيب
The Ranein water heater offers flexible installation options:
- Under-sink: Place the unit directly on the floor or a sturdy shelf beneath the sink.
- مثبت على الحائط: Use the provided mounting bracket, screws, and anchors to securely attach the unit to a wall. Ensure the wall material can support the weight of the full water heater.
الصورة: السابقamples of under-sink and wall-mounted installations for the Ranein water heater.
7. التشغيل
7.1 بدء التشغيل الأولي
- After completing water and electrical connections, ensure the tank is full by opening a hot water faucet until water flows without sputtering.
- Turn the temperature knob to your desired setting. The unit will begin heating the water.
7.2 تعديل درجة الحرارة
The temperature knob on the front of the unit allows you to set the desired water temperature between 68°F and 149°F (20°C and 65°C). Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it. The 'Heating' indicator light will illuminate when the unit is actively heating water.
Image: Close-up of the temperature adjustment knob, showing settings from 55°F to 145°F and suggested temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
فيديو: نبذة مختصرةview of the Ranein Mini Tank Water Heater, showcasing its compact design, high power heating, and ease of use in a kitchen setting.
8. الصيانة
Regular maintenance helps ensure the efficiency and longevity of your water heater.
- الصرف والشطف: Periodically drain and flush the tank to remove sediment buildup. This is especially important in areas with hard water. Refer to the installation section for draining procedures.
- Inspect T/P Valve: Annually check the pressure relief valve for proper operation. Lift and release the lever on the valve to ensure it opens and closes freely.
- فحص قضيب الأنود: The magnesium anode rod helps protect the tank from corrosion. It should be inspected and replaced as needed, typically every 1-3 years depending on water quality. This procedure may require professional assistance.
- التنظيف الخارجي: قم بتنظيف الجزء الخارجي من الوحدة باستخدام فرشاة ناعمة دamp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
9. استكشاف الأخطاء وإصلاحها
If you encounter issues with your water heater, refer to the following common troubleshooting steps. For complex problems, contact customer support.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يوجد ماء ساخن | No power, thermostat set too low, dry-burn protection activated | Check power connection and outlet. Adjust thermostat. Ensure tank is full of water. |
| الماء ليس ساخنًا بدرجة كافية | Thermostat set too low, excessive hot water demand, sediment buildup | Increase thermostat setting. Allow time for recovery. Drain and flush tank. |
| تسرب المياه | Loose connections, T/P valve discharge, tank damage | Tighten water connections. Check T/P valve for proper function. If tank damage is suspected, turn off water and power immediately and contact support. |
| عملية صاخبة | Sediment buildup, air in system | Drain and flush tank. Open hot water faucet to release air. |
10. الضمان والدعم
Ranein is committed to providing reliable products and excellent customer service.
- ضمان: This product is backed by a 2-year tank warranty against manufacturing defects.
- دعم العملاء: For installation guidance, product consultation, or problem-solving services, please contact Ranein customer support.
- معلومات الاتصال:
بريد إلكتروني: service@ranein.net
Phone (US): (424) 452-2630
