1. المقدمة
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. ماذا يوجد في الصندوق
- 1x Dimmer Light Switch
- 1x Wall Plate
- 4x سلك المكسرات
- 2 × براغي طويلة
- 2x براغي قصيرة
- 1x دليل المستخدم (هذه الوثيقة)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. المواصفات
| ميزة | التفاصيل |
|---|---|
| وضع التشغيل | تشغيل/إيقاف |
| التقييم الحالي | 3 Amps |
| حجم التشغيلtage | 125 فولت |
| الأجهزة المتوافقة | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| نوع التحكم | زر الضغط اليدوي |
| بروتوكول الاتصال | N.A (No WiFi) |
| الأبعاد (الطول × العرض × الارتفاع) | 4.49 × 2.76 × 1.34 بوصة |
| وزن العنصر | 5 أونصات |
| لون | أبيض |
Image: Product dimensions of the dimmer switch.
4. التثبيت
مهم: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- إيقاف تشغيل الطاقة: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltagه اختبار.
- إزالة المفتاح القديم: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
- تحديد الأسلاك: Identify the following wires in your electrical box:
- سلك الخط: Carries power from the circuit breaker.
- سلك الحمل: يتصل بوحدة الإضاءة.
- السلك المحايد: Typically white, required for this dimmer switch.
- سلك ارضي: Bare copper or green.
- Wire the Dimmer Switch: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- مفتاح التعتيم السلك الأبيض صندوق الحائط السلك المحايد
- مفتاح التعتيم السلك الأسود صندوق الحائط Power Supply's Line (Live)
- مفتاح التعتيم سلك أحمر صندوق الحائط تحميل الأسلاك
- مفتاح التعتيم السلك الأخضر صندوق الحائط سلك ارضي
- تركيب المفتاح: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- تثبيت لوحة الحائط: Attach the new wall plate over the dimmer switch.
- اعادة الطاقة: قم بإعادة تشغيل الطاقة من قاطع الدائرة.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. التشغيل
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
الاستخدام الأول
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
ضوابط أكثرview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- زر الطاقة: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- الضبط الدقيق: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- الضبط الدقيق: Press and hold to gradually decrease brightness by 1% each time. - أضواء المؤشر: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
وظيفة الذاكرة
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. التوافق
This dimmer switch is compatible with various dimmable light sources:
- عكس الضوء LED: 3-150W, 125V/60Hz
- Dimmable CFL: 3-150W, 125V/60Hz
- المتوهجة Lamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp و LED لamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.
