1. المقدمة
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Polibi 71.2" Rustic Display Cabinet with Glass Doors. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. معلومات هامة حول السلامة
- اقرأ جميع التعليمات: تأكد من فهمك لجميع الخطوات قبل التجميع.
- Two-person assembly: Assembly is recommended with two adults to prevent injury and damage.
- Glass handling: Handle glass doors and shelves with extreme care. Tempered glass is designed to shatter into small, less harmful pieces if broken, but sharp edges can still occur.
- Anti-tip kit: Always secure the cabinet to a wall using the provided anti-tip hardware to prevent tipping, especially in households with children or pets.
- حدود الوزن: Do not exceed the recommended weight capacity for shelves. Distribute weight evenly.
- الموقع: ضع الخزانة على سطح مستوٍ وثابت.
- تهوية: Ensure adequate ventilation around the cabinet if storing electronics.
3. محتويات العبوة
Before assembly, verify that all parts and hardware are present. If any items are missing or damaged, contact Polibi customer support.
3.1 المكونات:
- الألواح الجانبية (2)
- لوحة علوية (1)
- اللوحة السفلية (1)
- الألواح الخلفية (أقسام متعددة)
- Fixed Shelves (2)
- أرفف قابلة للتعديل (2)
- Glass Doors (2)
- Door Handles (2)
3.2 Hardware:
- أقفال الكامة ومسامير الكامة
- مسامير خشبية
- براغي (أحجام مختلفة)
- دبابيس الرف
- مفصلات الأبواب
- طقم مانع الانقلاب (مرساة جدارية، شريط، براغي)
- Allen Wrench (if required)
4. تعليمات التجميع
Follow these steps carefully. Lay out all parts on a soft, clean surface to prevent scratches.
Step 1: Attach Cam Bolts and Dowels to Panels
Insert cam bolts and wood dowels into the pre-drilled holes of the side, top, and bottom panels as indicated in the assembly diagram. Ensure they are fully seated.
الخطوة 2: تجميع الإطار الأساسي
Connect the bottom panel to the side panels using cam locks. Tighten cam locks securely with a screwdriver. Ensure the structure is stable.
Step 3: Install Fixed Shelves
Slide the fixed shelves into their designated grooves or attach them using cam locks and dowels. These shelves provide structural integrity.
الخطوة 4: تركيب اللوحة العلوية
Secure the top panel to the side panels using cam locks and dowels, similar to the base frame assembly.
الخطوة 5: تركيب الألواح الخلفية
Carefully align and attach the back panels to the rear of the cabinet using small screws or nails. Ensure the cabinet is square before securing the back panels to prevent warping.
Image: The Polibi display cabinet with both glass doors open, revealing four internal shelves. This view illustrates the internal structure and shelf placement.
Step 6: Attach Door Hinges to Doors
Mount the hinges to the glass doors using the provided screws. Ensure hinges are oriented correctly for proper door swing.
Step 7: Attach Doors to Cabinet
With assistance, carefully attach the doors to the cabinet frame by securing the hinges to the pre-drilled holes on the side panels. Adjust hinges as needed to ensure doors are level and close properly.
الخطوة 8: تثبيت مقابض الأبواب
Attach the door handles to the glass doors using the provided screws. Ensure they are tightened securely but do not overtighten, which could damage the glass or frame.
الصورة: لقطة مقربة view of the black metal handles on the wooden-framed glass doors of the Polibi display cabinet. This shows the design and attachment point of the handles.
الخطوة السادسة: تركيب أرفف قابلة للتعديل
Insert shelf pins into the desired holes on the side panels. Place the adjustable shelves onto the pins. Ensure all four pins are fully inserted and the shelf is level before placing items on it.
Step 10: Secure Cabinet with Anti-Tip Kit
Position the cabinet in its final location. Attach the anti-tip strap to the top rear of the cabinet and secure the other end to a wall stud using the provided wall anchor and screw. This step is crucial for safety.
5. تعليمات التشغيل
5.1 فتح وإغلاق الأبواب:
Gently pull or push the door handles to open and close the glass doors. Avoid slamming the doors to prevent damage to hinges and glass.
5.2 ضبط الرفوف:
To adjust the height of the adjustable shelves, first remove all items from the shelf. Carefully lift the shelf and remove the four shelf pins. Reinsert the pins into the desired new holes, ensuring they are level, then place the shelf back onto the pins.
6. الصيانة
6.1 Cleaning the Cabinet:
- الأسطح الخشبية: امسحي بقطعة قماش ناعمةamp قطعة قماش. تجنب استخدام المنظفات الكاشطة أو المواد الكيميائية القاسية التي قد تُتلف السطح. جفف فوراً بقطعة قماش نظيفة.
- ابواب زجاجية: Use a standard glass cleaner and a lint-free cloth. Spray cleaner onto the cloth, not directly onto the glass, to prevent overspray from damaging wood finishes.
6.2 الرعاية العامة:
- افحص جميع البراغي وأقفال الكامات بشكل دوري للتأكد من إحكام ربطها. أعد ربطها إذا لزم الأمر.
- تجنب تعريض الخزانة لأشعة الشمس المباشرة أو التغيرات الشديدة في درجات الحرارة، مما قد يتسبب في التواءها أو بهتان لونها.
- لا تضع الأشياء الساخنة مباشرة على سطح الخزانة بدون حماية.
7. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الخزانة متذبذبة أو غير مستقرة. | Loose hardware; uneven floor; back panels not fully secured. | Ensure all cam locks and screws are tightened. Place shims under the base if the floor is uneven. Verify back panels are securely fastened. |
| الأبواب لا تغلق بشكل صحيح أو غير محاذية. | Hinges are not adjusted correctly; cabinet is not square. | Adjust the screws on the door hinges to align the doors. Ensure the cabinet is square during assembly, especially when attaching back panels. |
| الرفوف ليست مستوية. | Shelf pins not fully inserted; pins inserted into different height holes. | Ensure all four shelf pins are fully inserted into the same level of holes. |
8. المواصفات
- ماركة: بولي
- نموذج: B0FCC8X5F3
- أبعاد المنتج: 33 بوصة عرض × 15.75 بوصة عمق × 71.2 بوصة ارتفاع
- مادة: Engineered Wood, Bamboo, Tempered Glass
- لون: الأبيض والبني
- عدد الرفوف: 4 (2 ثابت، 2 قابل للتعديل)
- التجميع مطلوب: نعم
- نوع التركيب: Freestanding (wall anchor recommended)
Image: A diagram illustrating the dimensions of the Polibi display cabinet. It shows the overall width (33"), depth (15.75"), and height (71.2"), along with internal shelf depths and door frame width.
9. الضمان والدعم
Polibi products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Polibi website. If you encounter any issues or require assistance with assembly or parts, please contact Polibi customer support through the retailer where the product was purchased or via the contact information provided on the Polibi webموقع.
لمزيد من الموارد ومعلومات المنتج، قم بزيارة: Polibi Official Store
