دليل مستخدم محول الطاقة الشمسية الهجين PowMr 6500W

1. المقدمة

This manual provides essential information for the installation, operation, and maintenance of your PowMr 6500W Hybrid Solar Inverter. Please read this manual thoroughly before installation and operation to ensure proper use and safety. This inverter is designed to convert 48V DC power to 110V/240V AC, featuring a 140A MPPT controller and supporting up to 6 units in parallel for a maximum combined output of 39kW.

2. معلومات السلامة

• شخص مؤهل: يجب أن يتم إجراء التركيب والصيانة بواسطة أفراد مؤهلين فقط.
• المخاطر الكهربائية: يعمل هذا الجهاز بجهد عالٍtages. Do not attempt to open or repair the unit unless specifically instructed.
• التأريض السليم: Ensure the inverter is properly grounded before connecting any power sources.
• سلامة البطارية: Always connect batteries with correct polarity. Wear protective gear when working with batteries.
• تهوية: تأكد من وجود تهوية كافية حول العاكس لمنع ارتفاع درجة الحرارة.
• للاستخدام الداخلي فقط: This product is designed for indoor use. Do not expose it to rain, snow, or excessive moisture.

3. انتهى المنتجview

The PowMr 6500W Hybrid Solar Inverter is an all-in-one solution for solar power systems, offering robust performance and versatile functionality.

الشكل 3.1: الجبهة view من محول الطاقة الشمسية الهجين PowMr بقدرة 6500 واط، الموضحasing the display and control buttons.

الشكل 3.2: انتهىview of key features including 6.5KW AC output, 140A max AC charging, split/single-phase support, battery compatibility, and parallel operation.

3.1. الميزات الرئيسية

• Split-phase and Single-phase Output: Provides both 120V and 240V AC output.
• انتاج طاقة عالية: 6500W continuous rated output, with a surge capacity of 13000W.
• Integrated MPPT Controller: Built-in 140A (70*2) MPPT solar charge controller.
• Dual PV Input: Supports two independent photovoltaic arrays with a maximum PV input power of 10kW (5000W * 2).
• القدرة المتوازية: Up to 6 units can be connected in parallel for a total capacity of 39kW.
• أوضاع شحن مرنة: Four selectable battery charging modes (Solar Only, Utility Priority, Solar Priority, Utility & Solar Hybrid).
• أوضاع إخراج متعددة: Two output working modes (Mains Bypass Output, Inverter Output).
• توافق واسع للبطارية: Works with 48V lead-acid (Seal, AGM, Gel, Flooded) and lithium batteries, also supports batteryless operation.
• الحماية الشاملة: Includes short circuit, over-current, over/under voltage, overload, and backfeed protection.

3.2. تحديد المكون

Figure 3.3: Detailed diagram of the inverter's ports and connections, including LCD screen, physical buttons, LED indicator, ON/OFF rocker switch, PV input, battery ports, dry contact, RS485/CAN port, WiFi port, USB-B port, CT, grounding screw, AC output, AC input, generator port, and parallel communication port.

3.3. Unboxing the Inverter

4. الإعداد والتثبيت

يُعدّ التركيب الصحيح أمراً بالغ الأهمية لضمان التشغيل الآمن والفعّال لجهاز العاكس. اتبع هذه الخطوات بعناية.

4.1. دليل الأسلاك

4.2. مخططات الاتصال

Figure 4.1: Diagram illustrating the split-phase (120V/240V) and single-phase (120V) output configurations of the inverter.

Figure 4.2: A detailed split-phase connection diagram showing PV input, mains/generator input, AC output, and battery connections.

4.3. التشغيل المتوازي

The inverter supports parallel operation for increased power output. Up to 6 units can be connected.

Figure 4.3: Diagrams illustrating parallel connections for two, three, and six solar storage inverters to expand system capacity.

5. تعليمات التشغيل

5.1. طرق الشحن

The inverter offers four selectable battery charging modes:

• الطاقة الشمسية فقط: Batteries are charged exclusively by solar power.
• أولوية المرافق: Utility power is the primary source for charging, with solar as a backup.
• الأولوية للطاقة الشمسية: Solar power is the primary source for charging, with utility as a backup.
• Utility & Solar Hybrid: Both utility and solar power are used to charge batteries.

5.2. أوضاع الإخراج

Two output working modes are available:

• Mains Bypass Output: يتم تزويد الأحمال بالطاقة مباشرة من شبكة الكهرباء.
• خرج العاكس: Loads are powered by the inverter, drawing from solar or battery power.

5.3. توافق البطارية

The inverter is compatible with various 48V battery types:

• Lead-acid batteries (Seal, AGM, Gel, Flooded)
• بطاريات الليثيوم
• Supports batteryless operation.

Figure 5.1: Visual representation of the inverter's compatibility with various battery types including AGM, GEL, FLD, and LI.

6. الصيانة

• التفتيش الدوري: Periodically check all connections for tightness and signs of corrosion.
• تنظيف: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow. Use a dry cloth for cleaning the exterior.
• صحة البطارية: مراقبة حجم البطاريةtage and charge levels regularly. Follow battery manufacturer guidelines for maintenance.
• الظروف البيئية: تأكد من أن العاكس يعمل ضمن نطاقات درجة الحرارة والرطوبة المحددة له.

7. استكشاف الأخطاء وإصلاحها

This section provides solutions for common issues. For complex problems, contact customer support.

8. المواصفات الفنية

9. الضمان والدعم

For warranty information, please refer to the warranty card included in your product packaging or contact PowMr customer support. For technical assistance, troubleshooting beyond this manual, or spare parts, please visit the official PowMr webالموقع أو اتصل بمراكز الخدمة المعتمدة لديهم.

الشكل 9.1: مثالamples of application scenarios for the PowMr Hybrid Solar Inverter, including RVs and general solar power systems.