دليل تعليمات مصباح عمود الإنارة LED من RAB Lighting طراز B17

1. المقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

تتضمن الميزات الرئيسية ما يلي:

• Energy-efficient LED with a 50,000-hour lifespan.
• وات قابل للتعديلtage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• مُدرج في قائمة UL للمواقع الرطبة.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. معلومات السلامة

تحذير: Risk of electric shock. Disconnect power before installation or servicing. Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

• ضمان حجم العرضtage is correct for the fixture.
• Do not handle live components.
• ارتدِ معدات الحماية الشخصية المناسبة.
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• لا تقم بتعديل الجهاز. أي تعديلات قد تبطل الضمان وتخلق مخاطر تتعلق بالسلامة.

3. محتويات العبوة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• دليل التعليمات (هذا المستند)

4. الإعداد والتثبيت

Follow these steps for proper installation of the B17 LED Bollard Light:

1. تحضير موقع التثبيت: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. فصل الطاقة: قم بفصل التيار الكهربائي من قاطع الدائرة قبل البدء بأي عمل كهربائي.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. إجراء التوصيلات الكهربائية: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   تأكد من أن جميع التوصيلات آمنة ومعزولة.
5. حدد واتtagه و CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. اعادة الطاقة: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. تعليمات التشغيل

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24W: أقصى سطوع.
• 19W: Medium brightness, reduced energy use.
• 14W: Lower brightness, maximum energy savings.

للتعديل: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Selectable Color Temperature (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000 ك: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000 ك: Neutral White, suitable for general illumination and task lighting.
• 5000 ك: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

للتعديل: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0-10V Dimming

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. الصيانة

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• تنظيف: نظف الجزء الخارجي من الجهاز بشكل دوري بقطعة قماش ناعمة.amp استخدم قطعة قماش لإزالة الأوساخ والشوائب. لا تستخدم منظفات كاشطة أو مذيبات. تأكد من فصل التيار الكهربائي قبل التنظيف.
• تقتيش: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• استبدال الصمام: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

9. الضمان والدعم

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webقم بزيارة الموقع أو وثائق الشراء الخاصة بك لمعرفة شروط الضمان المحددة وتفاصيل الاتصال.

RAB Lighting Contact: www.rablighting.com