BSEED Portable Camping Shower with Immersion Water Heater (Model PS-01)

المنتج انتهىview

The BSEED Portable Camping Shower with Immersion Water Heater provides a convenient solution for personal hygiene and various cleaning tasks in outdoor or off-grid environments. This kit combines a powerful rechargeable shower pump with an efficient immersion water heater, ensuring warm water is available wherever needed.

Image: All components of the BSEED Portable Camping Shower kit, including the shower pump, shower head, immersion heater, hose, charging cable, thermometer, cleaning ball, multi-purpose hook, suction cups, and mesh storage bag.

محتويات الحزمة

• 1x Multi-mode Shower Head
• 1x Power Water Pump (6000mAh rechargeable battery)
• 1x Water Pipe (6.7 feet / 2 meters)
• 1x Electric Heating Rod (2000W)
• 1x Multi-purpose Hook
• 3 × أكواب شفط
• 1 × كابل شحن من النوع C
• 1x Digital Thermometer
• 1x Stainless Steel Cleaning Ball
• 1x Mesh Storage Bag

Image: A visual representation of all included components and a step-by-step guide for initial assembly of the shower system.

تعليمات الإعداد

1. Charge the Water Pump: Ensure the 6000mAh rechargeable water pump is fully charged using the provided Type-C charging cable. The LED display on the pump will indicate battery status.
2. Assemble the Shower:
   • Connect one end of the 6.7-foot water pipe to the power water pump.
   • Connect the other end of the water pipe to the multi-mode shower head.
3. تحضير مصدر المياه: Fill a suitable container (e.g., plastic bucket, ceramic bathtub, wooden barrel) with water. Ensure the container is stable.
4. Heat Water (Optional): If warm water is desired, place the 2000W electric heating rod into the water container. Ensure the heating rod is fully submerged before plugging it into a power source (wall outlet or generator). Use the digital thermometer to monitor water temperature, aiming for a comfortable range (32°F to 140°F) to avoid scalding. Unplug the heating rod once the desired temperature is reached and remove it from the water before using the shower.
5. وضع المضخة: Place the power water pump into the water container. The four suction cups at the bottom of the pump will help it sink and adhere to the bottom of the container. Ensure the pump is fully submerged.
6. تجهيز المضخة: Wait until bubbles stop emerging from the water pump before turning it on. This indicates the pump is primed and ready to draw water.

Image: Detailed visual guide showing how to connect the hose to the pump and shower head, and how to submerge the pump and heater in a water container.

تعليمات التشغيل

1. تشغيل المضخة: Press the power button on the water pump. The LED display will show battery status and water temperature.
2. ضبط تدفق المياه: The pump offers two battery power modes: "High" and "Low". Use the controls on the pump to select your desired water flow intensity.
3. Adjust Shower Head Spray: The multi-mode shower head allows you to switch between different water outlet modes by rotating its handle. It can also be adjusted at 5 angles for wider water flow.
4. استخدام حر اليدين: Utilize the multi-purpose hook and suction cups to fix the shower head on a tree branch, tent bracket, or any smooth, flat surface (e.g., vehicle window) for hands-free operation.

Image: Close-up of the intelligent LED digital display on the water pump, showing battery level, water temperature, and power mode selection.

Image: Illustration of the multi-mode shower head demonstrating different spray patterns and adjustable angles for various uses.

الصورة: السابقamples of how to use the multi-purpose hook and suction cups to mount the shower head for hands-free operation on a tree branch or a vehicle.

صيانة

• Cleaning the PP Filter: The water pump is equipped with a PP filter element to remove impurities. Regularly remove and clean the filter to ensure optimal performance and prevent skin problems.
• Cleaning the Heating Rod: Use the provided stainless steel cleaning ball to remove any dirt or mineral buildup from the immersion heating rod.
• تخزين: After use, ensure all components are dry before storing them in the mesh storage bag for easy transport and protection.

استكشاف الأخطاء وإصلاحها

• لا تدفق المياه: If no water comes out of the shower head, ensure the water pump was placed into the water container first and allowed to prime (bubbles stop emerging) before being turned on. If the pump is turned on before being submerged, it may not work properly.
• Heating Rod Safety: Always ensure the electric heating rod is fully submerged in water before plugging it into a power source to prevent dry burning. Do not touch the water while the heater is plugged in. Avoid using the heater with metal buckets or thermos bottles.
• عمر البطارية: If the pump's battery life is shorter than expected, ensure it is fully charged (approximately 3 hours for 120-180 minutes of continuous flow).

Image: Important safety notices for using the immersion water heater, including full submersion requirement, avoiding contact with water while plugged in, and unsuitable container types.

تحديد

• الاسم التجاري: بذور
• اسم الموديل: س-01
• أبعاد حزمة المنتج L x W x H: 12.36 × 6.65 × 4.06 بوصة
• وزن الحزمة: 1.4 كيلوغرام
• وزن السلعة: 1.39 كيلوغرام
• لون: أسود
• مادة: نظام ABS
• الشركة المصنعة: بذور
• المكونات المتضمنة: Spray-head, Power Water Pump, Water Pipe, Electric Heating Rod, Multi-purpose Hook, Suction Cups, Type-C Charging Cable, Digital Thermometer, Cleaning Ball, Mesh Storage Bag

الضمان والدعم

This product comes with a standard manufacturer's warranty. For detailed warranty information, product support, or troubleshooting assistance, please refer to the official BSEED website or contact BSEED customer service directly.

يمكنك أيضًا زيارة BSEED Store on Amazon for additional product information and customer reviews.