1. المقدمة
Thank you for choosing the Parkside PIFDS 120 A1 Inverter Welder. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new welding machine. Please read these instructions carefully before first use and keep them for future reference.
The Parkside PIFDS 120 A1 is a compact and powerful inverter welder designed for mobile use. It operates without the need for shielding gas, making it suitable for both experienced users and beginners. The synergistic rotary knob allows for easy adjustment to material thickness, ensuring optimal welding results.
2. تعليمات السلامة
Always prioritize safety when operating welding equipment. Failure to follow these safety guidelines can result in serious injury or damage to property.
- ارتدِ معدات الحماية الشخصية المناسبة: This includes a welding helmet with suitable shade, welding gloves, protective clothing, and safety shoes. The included protective shield should be used.
- تأكد من التهوية المناسبة: Welding fumes can be hazardous. Work in a well-ventilated area or use fume extraction.
- منع الصدمة الكهربائية: Ensure the welder is properly grounded. Do not operate in wet conditions. Inspect cables for damage before each use.
- مانع الحريق: Remove flammable materials from the welding area. Have a fire extinguisher readily available.
- Eye and skin protection: Welding arc rays can cause severe burns to eyes and skin. Never look at the arc without proper eye protection.
- الأطفال والمارة: أبعدوا الأطفال والأشخاص غير المصرح لهم عن منطقة اللحام.
3. محتويات العبوة
Carefully unpack the device and check for completeness. If any parts are missing or damaged, contact your retailer.
- Parkside PIFDS 120 A1 Inverter Welder
- Welding Protective Shield
- 0.45 kg Welding Wire (0.9 mm)
- 1 Burner Nozzle (pre-mounted)
- 4 Welding Nozzles (1 pre-mounted, for Ø 0.6 / 0.8 / 0.9 / 1.0 mm)
- 1 Slag Hammer with Wire Brush
- 1 Carrying Strap
- دليل التعليمات
الشكل 1: The product packaging for the Parkside PIFDS 120 A1 Inverter Welder, showing the welder and included accessories.
4. الإعداد
Before operating the welder, ensure it is set up correctly.
- الموقع: Place the welder on a stable, level surface. Ensure adequate space for ventilation around the unit.
- Install Welding Wire: Open the wire compartment and carefully install the 0.9 mm welding wire spool. Thread the wire through the feed mechanism and into the welding cable.
- Attach Ground Cable: Connect the ground cable with its powerful clamp to the workpiece. Ensure a clean, secure connection for optimal electrical contact.
- Select Welding Nozzle: Choose the appropriate welding nozzle for your wire diameter (0.9 mm is pre-mounted for the included wire).
- توصيل الطاقة: Plug the 4-meter power cable into a suitable 230 V~, 50/60 Hz power outlet.
- Attach Carrying Strap: If mobile use is intended, attach the carrying strap to the designated points on the welder housing.
الشكل 2: تفصيلية view of the welder's front panel, showing the synergistic knob, welding cable connection, and ground cable connection point.
5. تعليمات التشغيل
The Parkside PIFDS 120 A1 is designed for gasless flux-cored wire welding.
- تشغيل الطاقة: Switch on the welder using the main power switch. The indicator light will illuminate.
- ضبط الإعدادات: Use the synergistic rotary knob to select the material thickness (0.8 to 3 mm). The welder will automatically adjust the welding current and wire feed speed for optimal results.
- تحضير قطعة العمل: Ensure the workpiece is clean and free of rust, paint, or grease.
- بدء اللحام: Position the welding torch close to the workpiece. Press the trigger on the torch to initiate the arc. Maintain a consistent travel speed and arc length.
- Monitor Overload Protection: The thermal controller with an indicator light provides overload protection. If the light illuminates, the welder has overheated. Allow it to cool down before resuming operation.
- Finish Welding: Release the trigger to stop the arc. Allow the weld to cool before handling.
الشكل 3: The Parkside PIFDS 120 A1 Inverter Welder shown with its welding torch, ground clamp, and the included protective welding shield.
6. الصيانة
تضمن الصيانة الدورية طول عمر جهاز اللحام الخاص بك وأدائه الأمثل.
- تنظيف: Regularly clean the welder's exterior with a dry cloth. Use compressed air to clear dust from ventilation slots.
- فحص الكابلات: Inspect all welding and power cables for cuts, abrasions, or loose connections before each use. Replace damaged cables immediately.
- الفوهة وطرف التلامس: Periodically check and clean the welding nozzle and contact tip. Replace them if they are worn or clogged to ensure consistent wire feed and arc stability.
- آلية تغذية الأسلاك: Keep the wire feed mechanism clean and free of debris. Ensure the wire spool rotates smoothly.
- تخزين: قم بتخزين آلة اللحام في بيئة جافة وخالية من الغبار عندما لا تكون قيد الاستخدام.
7. استكشاف الأخطاء وإصلاحها
إذا واجهت مشاكل مع جهاز اللحام الخاص بك، فراجع المشاكل والحلول الشائعة التالية:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يعمل جهاز اللحام | لا يوجد مصدر طاقة؛ كابل طاقة معطل؛ مفتاح التشغيل الرئيسي مطفأ | Check power outlet and circuit breaker; Inspect power cable; Turn on main switch |
| لا يوجد قوس لحام | Poor ground connection; Incorrect settings; Worn contact tip; No welding wire | Ensure clean, secure ground connection; Adjust synergistic knob; Replace contact tip; Check wire spool and feed |
| Wire feed issues | Kinked wire; Clogged contact tip; Incorrect wire tension; Empty wire spool | Straighten wire; Clean/replace contact tip; Adjust wire tension; Replace wire spool |
| ضوء مؤشر الحمل الزائد مضاء | Welder overheated due to prolonged use or insufficient ventilation | Allow welder to cool down; Ensure adequate ventilation |
إذا استمرت المشكلة بعد محاولة هذه الحلول، فيرجى الاتصال بدعم العملاء.
8. المواصفات
Technical data for the Parkside PIFDS 120 A1 Inverter Welder:
| ميزة | مواصفة |
|---|---|
| رقم الموديل | PIFDS 120 A1 |
| تصنيف المجلدtage | 230 فولت ~ |
| تكرار | 50/60 هرتز |
| تيار اللحام | 25-120 A |
| فئة الحماية | IP21S |
| طول كابل الطاقة | 4 متر |
| طول كابل التأريض | 2 متر |
| سمك المادة الموصى به | 0.8-3 ملم |
| مادة | الفولاذ والبلاستيك |
| الأبعاد (تقريبًا) | 33.1 × 16.1 × 19.9 سم |
| الوزن (تقريبا) | 4 كجم |
الشكل 4: A visual representation of the technical specifications for the welder.
9. الضمان والدعم
This Parkside product comes with a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your retailer or the official Parkside customer service in your region. Information regarding spare parts availability may vary by region.
