1. المقدمة
This manual provides detailed instructions for the DNP QW410 Compact Photo Printer Bundle. This bundle is designed for photo booth operators and event photographers, offering portability and high-quality print output. It includes the DNP QW410 Printer, a WCM Plus Wireless Module for Wi-Fi connectivity, a 4x6 media kit for 300 prints, and a PrinterBag brand carrying case for secure transport.
The DNP QW410 is a lightweight and compact photo printer known for its exceptional print quality, maintaining the superior standards expected from DNP products. The WCM Plus module enhances its functionality by enabling wireless printing capabilities.
2. محتويات العبوة
Upon unpacking, please verify that all the following components are included in your DNP QW410 Compact Photo Printer Bundle:
- DNP QW410 Compact Photo Printer
- PrinterBag Brand Carrying Case
- WCM Plus Wireless Module
- 4x6 Media Kit (for 300 prints)
- كابل الطاقة
- كابل يو اس بي

الشكل 2.1: زيادةview of the DNP QW410 Printer Bundle components, including the printer, carrying case, WCM Plus module, and media kit.

الشكل 2.2: The DNP QW410 printer and media kit securely stored within the PrinterBag brand carrying case, demonstrating its portability and protection.
3. دليل الإعداد
3.1. Printer Initial Setup
- فك حزمة الطابعة: Carefully remove the DNP QW410 printer from its packaging. Place it on a stable, flat surface with adequate ventilation.
- توصيل الطاقة: Plug the power cable into the printer's power input and then into a suitable electrical outlet.
- Load Media Kit:
- Open the printer's media compartment.
- Insert the ribbon and paper rolls from the 4x6 media kit according to the diagrams inside the printer or the quick start guide. Ensure they are seated correctly.
- أغلق حجرة الوسائط بشكل آمن.
- تشغيل الطاقة: Press the power button on the printer. The indicator lights will show the printer's status.

الشكل 3.1: The DNP QW410 printer with the 4x6 media kit loaded, ready for printing. Proper media loading is crucial for optimal print quality.
3.2. WCM Plus Wireless Module Setup
- Connect WCM Plus: Insert the WCM Plus module into the designated USB port on the DNP QW410 printer.
- Power On WCM Plus: The WCM Plus module will power on automatically when connected to the printer.
- تكوين شبكة:
- Refer to the WCM Plus quick start guide for detailed instructions on connecting it to your Wi-Fi network or setting it up as an access point.
- Typically, you will need to download a companion app or access a web interface to configure the wireless settings.

الشكل 3.2: The DNP QW410 printer with the WCM Plus wireless module securely attached, enabling wireless connectivity for printing.
4. تعليمات التشغيل
4.1. توصيل جهازك
The DNP QW410, with the WCM Plus module, supports various connection methods:
- Wi-Fi (via WCM Plus): Connect your smartphone (iPhone, Android), tablet (iPad), or computer (Mac, PC) to the Wi-Fi network broadcast by the WCM Plus, or connect the WCM Plus to your existing Wi-Fi network. Use the DNP printing application or standard print functions (e.g., AirPrint) to send print jobs.
- USB (Direct Connection): For direct connection to a computer, use a USB cable. Ensure the appropriate printer drivers are installed on your computer.

الشكل 4.1: A smartphone screen displaying photo selection, indicating wireless connectivity to the DNP QW410 printer for direct printing.

الشكل 4.2: تفصيلية view of the WCM Plus Wireless Module, highlighting its connectivity ports and branding.
4.2. طباعة الصور
- اختر الصورة: Choose the photo(s) you wish to print from your connected device.
- Choose Print Options: In your printing application or system print dialog, select the DNP QW410 printer. Adjust print settings such as print size (e.g., 4x6 inches), quantity, and quality if available.
- بدء الطباعة: Confirm your selections and send the print job to the printer. The printer will process and output the photo.
The DNP QW410 supports various photographic quality print sizes, including 4x4", 4x6", 4.5x4.5", and 4.5x8".

الشكل 4.3: The DNP QW410 printer showcasing its capability to produce various print sizes, including 4x4, 4x6, 4.5x4.5, and 4.5x8 inches.
5. الصيانة
5.1. تنظيف الطابعة
- التنظيف الخارجي: Use a soft, dry, lint-free cloth to wipe the exterior of the printer. Do not use abrasive cleaners or solvents.
- التنظيف الداخلي: Refer to the printer's specific cleaning instructions in the manufacturer's detailed manual for internal components like the print head or rollers. Typically, a cleaning sheet may be provided with media kits or sold separately.
5.2. Media Handling and Storage
- Store Media Properly: Keep media kits (paper and ribbon) in their original sealed packaging until ready for use. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
- التعامل معها بحذر: Avoid touching the surface of the paper or the ribbon directly, as oils from your skin can affect print quality.
- استبدال الوسائط: When the printer indicates low or empty media, replace both the paper roll and the ribbon simultaneously with a new, compatible media kit.
6. استكشاف الأخطاء وإصلاحها
This section addresses common issues you might encounter with your DNP QW410 printer and WCM Plus module.
6.1. Common Printer Issues
- الطابعة لا تستجيب:
- Ensure the printer is powered on and the power cable is securely connected.
- Check the USB or Wi-Fi connection to your device.
- Restart both the printer and your connected device.
- جودة الطباعة رديئة (خطوط، بهتان، ألوان غير صحيحة):
- Verify that the media kit (paper and ribbon) is correctly installed and not depleted.
- Ensure you are using genuine DNP media kits compatible with the QW410.
- Perform a printer cleaning cycle if available, or manually clean the print head as per the detailed manual.
- انحشار الورق:
- Power off the printer immediately.
- Carefully open the media compartment and gently remove any jammed paper or ribbon fragments. Do not force them.
- Ensure media is loaded correctly and not wrinkled or damaged before re-inserting.
6.2. WCM Plus Connectivity Issues
- Cannot Connect to WCM Plus Wi-Fi:
- Ensure the WCM Plus module is securely connected to the printer and powered on.
- Check if the WCM Plus is broadcasting its Wi-Fi network (if in access point mode) or connected to your local Wi-Fi network.
- Restart the WCM Plus module by unplugging and re-plugging it from the printer.
- Print Jobs Not Reaching Printer via Wi-Fi:
- Confirm your device is connected to the correct Wi-Fi network (either the WCM Plus's network or the same network the WCM Plus is connected to).
- Ensure the DNP printing application or drivers are up to date on your device.
- Check for any firewall or network settings that might be blocking communication.
For more detailed troubleshooting, refer to the comprehensive DNP QW410 user manual or the WCM Plus documentation.
7. المواصفات الفنية
| ميزة | مواصفة |
|---|---|
| ماركة | عدم الترشح للرئاسة |
| اسم الموديل | QW410 |
| تكنولوجيا الطباعة | صبغ التسامي |
| نوع حبر الطابعة | Inkless (Dye Sublimation) |
| تكنولوجيا الاتصال | Wi-Fi (via WCM Plus), USB |
| أقصى دقة طباعة ملونة | 300 نقطة في البوصة |
| أقصى دقة طباعة بالأبيض والأسود | 300 نقطة في البوصة |
| أقصى سرعة للطباعة (أحادية اللون) | 3 جزء في المليون |
| الحد الأقصى لحجم الوسائط | 4x6 inches (supports other sizes like 4x4, 4.5x4.5, 4.5x8 with appropriate media) |
| الحد الأقصى لسعة ورقة الإدخال | 300 prints (with included media kit) |
| أبعاد المنتج | 20 x 20 x 20 inches (approximate, for bundle) |
| وزن العنصر | 40 pounds (approximate, for bundle) |
| خرطوشة متوافقة | QW410 media kit |
| طريقة التحكم | برنامج |
8. معلومات الضمان
Specific warranty details for the DNP QW410 Compact Photo Printer and its bundled accessories are typically provided with the product packaging or available on the manufacturer's official website. Please refer to the warranty card or documentation included in your purchase for terms, conditions, and duration of coverage.
It is recommended to register your product with DNP after purchase to ensure full warranty benefits and to receive important product updates.
9. دعم العملاء
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your DNP QW410 Compact Photo Printer Bundle, please contact DNP customer support. Support contact information can usually be found on the official DNP webيمكنك الاطلاع على المعلومات المتوفرة في الموقع أو في الوثائق المرفقة مع منتجك.
When contacting support, please have your product model number (QW410) and serial number ready, along with a detailed description of the issue you are experiencing.
الموارد المتاحة على الإنترنت:
- DNP Photo Imaging Official Webموقع (for drivers, firmware, and detailed manuals)
- DNP Support Page (for FAQs and contact information)





