Paladone The Legend of Zelda Heart Container Light Instruction Manual

مقدمة

This manual provides essential information for the safe and effective use of your Paladone The Legend of Zelda Heart Container Light. This officially licensed Nintendo product is designed to provide ambient lighting with a distinctive 3D Heart Container design. Please read these instructions thoroughly before use and retain them for future reference.

The Heart Container Light stands at 21.6cm (8.5 inches) tall and features two light modes: a steady glow and a gentle, pulsing effect. It can be powered via USB or AAA batteries, offering versatile placement options.

ماذا يوجد في الصندوق

• 1 x Paladone The Legend of Zelda Heart Container Light Unit
• 1 x Clear Plastic Display Stand
• شنومكس x أوسب كابل الطاقة
• Note: 3x AAA batteries are required for cordless operation and are not included.

يثبت

تشغيل الجهاز:

1. طاقة USB:

   Connect the included USB cable to the USB port located on the back of the Heart Container Light. Plug the other end of the USB cable into a compatible USB power source (e.g., a USB wall adapter, computer USB port, or power bank). The light will be ready for operation.
2. طاقة البطارية:

   Locate the battery compartment on the back of the light unit. Open the compartment cover and insert 3x AAA batteries, ensuring correct polarity (+/-). Close the battery compartment securely. The light is now ready for cordless use.

خيارات التنسيب:

• Desk or Shelf Display: Insert the Heart Container Light into the provided clear plastic stand. Place the stand on a flat, stable surface.
• التثبيت على الحائط: The light unit can also be mounted on a wall using appropriate hardware (not included). Ensure the mounting surface is suitable to support the light's weight.

تعليمات التشغيل

The Paladone Heart Container Light features a simple push-button control for cycling through its light modes.

1. Power On / Steady Light Mode: Press the power button once to turn on the light. It will illuminate with a steady red glow.
2. Pulsing Light Mode: Press the power button a second time to activate the gentle, pulsing light effect. The red light will subtly brighten and dim, mimicking a heartbeat.
3. إيقاف التشغيل: Press the power button a third time to turn off the light.

صيانة

• تنظيف: To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
• تخزين: When not in use for extended periods, remove the AAA batteries to prevent leakage. Store the light in a cool, dry place away from direct sunlight.
• العناية العامة: Avoid dropping the unit or exposing it to excessive force, as this may cause damage. This product is for indoor use only and is not water-resistant.

استكشاف الأخطاء وإصلاحها

الضوء لا يعمل:

• Ensure the USB cable is securely connected to both the light and the power source, or that fresh AAA batteries are correctly installed with proper polarity.
• Verify the power source is active (e.g., wall outlet is working, USB port is powered).
• اضغط على زر الطاقة بقوة.

الضوء خافت أو متقطع:

• If using batteries, replace them with new ones. Low battery power can cause dimming or flickering.
• If using USB, try a different USB cable or power adapter.

تحديد

الضمان والدعم

For information regarding warranty coverage, product support, or replacement parts, please refer to the contact information provided on the product packaging or visit the official Paladone webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.