مقدمة
The Paulmann 71193 Solar LED Strip is designed to provide atmospheric and efficient accent lighting for your home and garden. This 5-meter warm white LED strip is powered by a high-quality solar panel, offering an environmentally friendly lighting solution that operates independently of a direct power outlet. It features a twilight sensor for automatic activation and comes with a remote control for convenient operation, including dimming and timer functions. The replaceable 18650 Li-ion battery ensures long-term reliability.
معلومات السلامة
- تأكد من توصيل جميع المكونات بشكل آمن قبل الاستخدام.
- Do not attempt to modify or disassemble the product. This may void the warranty and pose safety risks.
- حافظ على نظافة اللوحة الشمسية لضمان أداء شحن مثالي.
- This product is designed for outdoor use and is IP65 water-protected. However, avoid submerging the components in water.
- تخلص من البطاريات بطريقة مسؤولة وفقًا للوائح المحلية.
- يحفظ بعيدًا عن متناول الأطفال.
محتويات الحزمة
يرجى التحقق من الحزمة للتأكد من وجود جميع العناصر وعدم تعرضها للتلف:
- 1 x LED Strip (5 meters)
- 1 × جهاز التحكم عن بعد
- 1 x Controller (integrated with solar panel)
- 1 × وتد أرضي للوحة الشمسية

Image: All included components of the Paulmann Solar LED Strip.
يثبت
- وضع الألواح الشمسية: Choose a location for the solar panel that receives direct sunlight for at least 6-8 hours daily. This is crucial for optimal charging. The included ground stake allows for easy installation in soft ground. You can also hang the solar panel using its integrated hook.

Image: Solar panel with ground stake.
- تركيب شريط LED: Unroll the 5-meter LED strip. The strip is flexible and can be placed along paths, garden beds, or other outdoor features. Ensure the strip is not kinked or sharply bent during installation. The IP65 rating ensures protection against water jets, making it suitable for outdoor environments.

Image: LED strip showing water protection.
- توصيل المكونات: Connect the cable from the LED strip to the output port on the solar panel controller. Ensure the connection is secure.
- التهمة الاولية: Before first use, allow the solar panel to charge in direct sunlight for a full day (approximately 6.5 hours) to ensure the internal battery is sufficiently charged.
عملية
The Paulmann Solar LED Strip offers both automatic and manual control options.
Automatic Operation (Twilight Sensor)
The integrated twilight sensor automatically turns the LED strip on when it gets dark and off when it becomes light. This feature ensures energy efficiency and convenience.

Image: Automatic activation via twilight sensor.
وظائف التحكم عن بعد
The included remote control provides full command over your LED strip:

Image: Remote control for the LED strip.
- زر الطاقة (الأحمر): Press to turn the LED strip ON or OFF.
- Mode Buttons (+/-): Adjust the lighting mode (if multiple modes are available, e.g., steady on, flashing).
- Dim Level Buttons (Sun icons): Increase or decrease the brightness of the LED strip.
- Timer Mode Buttons (3, 5, 8 hours): Set the LED strip to automatically turn off after 3, 5, or 8 hours. Press 'OFF' to cancel the timer.
You can also manually turn the light ON/OFF directly on the solar panel unit using the dedicated button.

Image: Control interface on the solar panel.
صيانة
- تنظيف اللوحة الشمسية: امسح سطح اللوحة الشمسية بانتظام بقطعة قماش ناعمة.amp قطعة قماش لإزالة الغبار والأوساخ والحطام. تضمن اللوحة النظيفة أقصى امتصاص لأشعة الشمس وكفاءة شحن عالية.
- استبدال البطارية: The solar panel uses a standard 18650 Li-ion battery. If the lighting duration significantly decreases over time, the battery may need replacement. Refer to the battery compartment on the solar panel for instructions on how to safely replace it. Ensure you use a compatible 18650 1500 mAh battery.
- تخزين: If storing the LED strip for an extended period, especially during winter months, ensure the battery is fully charged before storage. Store in a cool, dry place.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| LED strip does not light up at night. | شحنة الطاقة الشمسية غير كافية. | Ensure solar panel is placed in direct sunlight for at least 6-8 hours daily. Clean the solar panel surface. |
| Light is dim or only lasts a short time. | البطارية غير مشحونة بالكامل أو قديمة. | Allow more charging time. Consider replacing the 18650 battery if performance does not improve. |
| جهاز التحكم عن بعد لا يعمل. | نفاذ بطارية الجهاز عن بعد أو وجود عائق. | Replace the remote control battery. Ensure there is no obstruction between the remote and the solar panel/controller. |
| LED strip flickers. | انخفاض شحن البطارية أو وجود خلل في الاتصال. | Ensure the battery is fully charged. Check all cable connections for tightness. |
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | بولمان |
| رقم الموديل | 71193 |
| أبعاد المنتج (الطول × العرض × الارتفاع) | 2.6 x 10.1 x 11.1 cm (solar unit); 5 meters (LED strip) |
| وزن العنصر | 410 جرام |
| لون | Black (solar unit), Warm White (LEDs) |
| عدد مصادر الضوء | 300 مصابيح LED |
| وشملت المكونات | 1 strip (5 m), 1 remote control, 1 controller, 1 ground stake |
| المجلدtage | 5 فولت |
| نوع مصدر الطاقة | تعمل بالطاقة الشمسية |
| البطارية متضمنة | No (refers to initial purchase, but a replaceable 18650 battery is required and typically pre-installed for solar products) |
| البطارية المطلوبة | Yes (18650 Li-ion) |
| قوة | 2.8 واط |
| درجة حرارة اللون | 2700 كلفن (أبيض دافئ) |
| بروتوكول الاتصال | الأشعة تحت الحمراء (للتحكم عن بعد) |
| الاستخدام الداخلي والخارجي | في الهواء الطلق |
| وقت الشحن | Approx. 6.5 hours (full sunlight) |
| مدة الإضاءة | Approx. 4 hours (on full charge) |
الضمان والدعم
For warranty information and customer support, please refer to the Paulmann official webالموقع أو تواصل مع بائع التجزئة. احتفظ بإيصال الشراء كإثبات للشراء في حال وجود أي مطالبات بالضمان.
For further assistance or technical inquiries, please visit the Paulmann support page or contact their customer service department.





