ASRock Steel Legend SL-850G 850W Power Supply Instruction Manual

1. المقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your ASRock Steel Legend SL-850G 850W Full Modular Power Supply. Please read this manual thoroughly before installation to ensure proper setup and safe operation. This power supply unit (PSU) is designed to deliver stable and efficient power to your personal computer system.

2. الميزات الرئيسية

• شهادة 80 بلس الذهبية: Ensures high power efficiency, reducing heat generation and operating costs.
• Cybenetics Platinum and LAMBDA A+ Certified: Guarantees superior efficiency and quiet operation.
• ATX3.1 & PCIe5.1 Ready: Fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, including native 12V-2x6 cable support for modern graphics cards.
• Fully Modular Cable Design: Allows for cleaner cable management and improved airflow by connecting only the necessary cables.
• 100% Highly Reliable Japanese Capacitors: Utilizes high-quality Japanese capacitors rated for 105°C, ensuring long-term stability and durability.
• iCool Intelligent Fan Control Mode: Optimizes fan speed based on load and temperature, providing quiet operation at low to medium loads.
• Built-in 5V BOOST Function: Provides stable 5V power delivery.
• 135mm Striped Axial FDB Fan: Features a Fluid Dynamic Bearing (FDB) fan for quiet operation and extended lifespan.

3. محتويات العبوة

تأكد من وجود كافة العناصر في العبوة قبل المتابعة بالتثبيت.

Image: Contents of the ASRock Steel Legend SL-850G Power Supply package.

• ASRock Steel Legend SL-850G Power Supply Unit
• التيار المتردد كابل
• Modular Cable Set (MB 24-Pin, CPU 4+4 Pin, PCIe 12V-2x6, PCIe 6+2 Pin, SATA, PATA)
• دليل التثبيت/دليل المستخدم
• ATX 24-Pin PSU Tester
• حقيبة كابل
• العلاقات كابل الفيلكرو
• روابط الكابلات
• مسامير التثبيت

Image: Detailed diagram of included modular cables and their lengths.

4. الإعداد والتثبيت

Proper installation is crucial for the performance and longevity of your power supply. Always ensure your system is powered off and unplugged from the wall outlet before installation.

4.1 احتياطات السلامة

• Disconnect the AC power cord from the wall outlet before handling the PSU or any internal components.
• تأكد من التأريض المناسب لمنع التفريغ الكهروستاتيكي (ESD).
• لا تفتح وحدة التزويد بالطاقةasinز. حجم الصوت العاليtages are present inside, even when unplugged.

4.2 التثبيت المادي

1. Mount the PSU into the designated power supply bay in your computer case. Ensure the fan is facing the correct direction for optimal airflow (usually facing down if there's a bottom vent, or up if it's a top-mounted PSU).
2. قم بتثبيت وحدة تزويد الطاقة في الهيكل باستخدام براغي التثبيت المرفقة.

4.3 اتصالات الكابلات

Connect only the necessary modular cables to your components. This improves cable management and airflow within your case.

الصورة: الجانب view of the power supply with modular cable connections clearly labeled.

• طاقة اللوحة الأم: قم بتوصيل كابل ATX ذو 24 سنًا باللوحة الأم.
• طاقة وحدة المعالجة المركزية: Connect the 4+4-pin EPS/ATX12V cable(s) to your motherboard's CPU power connector(s).
• PCIe Power (Graphics Cards): For modern graphics cards requiring a 12V-2x6 connector, use the dedicated cable. Ensure the connector is fully seated. For other graphics cards, use the 6+2-pin PCIe cables.

Image: Proper connection of the PCIe 12V-2x6 cable, highlighting the importance of full insertion.

• طاقة SATA: Connect SATA power cables to your storage drives (SSDs, HDDs) and other SATA-powered devices.
• PATA Power (Molex): Connect PATA power cables to older peripherals or case fans if needed.

After connecting all necessary internal cables, connect the AC power cord to the PSU and then to a wall outlet.

5. تعليمات التشغيل

5.1 تشغيل/إيقاف التشغيل

1. تأكد من توصيل كافة الكابلات بشكل آمن.
2. Flip the main power switch on the back of the PSU to the 'I' (On) position.
3. Power on your computer system via the case power button.
4. To power off, shut down your operating system normally, then flip the main power switch on the PSU to the 'O' (Off) position.

Image: Rear panel of the power supply, indicating the main power switch and iCool fan control switch.

5.2 iCool Intelligent Fan Control

The ASRock Steel Legend SL-850G features an iCool switch on the rear panel. This switch controls the fan's operation mode:

• iCool ON: The fan will remain off at low to medium loads for silent operation. It will activate automatically when the load or temperature increases.
• iCool OFF: The fan will operate continuously, regardless of the load or temperature. This provides maximum cooling but may result in higher noise levels.

اختر الوضع الذي يناسب تفضيلاتك فيما يتعلق بالضوضاء وأداء التبريد.

Image: iCool Mode Curve Diagram, showing fan noise levels versus load percentage.

6. الصيانة

تساعد الصيانة المنتظمة على ضمان طول عمر وأداء مصدر الطاقة الخاص بك على النحو الأمثل.

• تنظيف: Periodically clean the exterior of the PSU and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and heatsinks. Ensure the system is powered off and unplugged before cleaning.
• إدارة الكابلات: Ensure cables are neatly routed and do not obstruct airflow within the case.
• بيئة: Operate the PSU in a well-ventilated area, away from excessive heat, humidity, and direct sunlight.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your power supply, try the following troubleshooting steps:

• لا يوجد طاقة:
  • تأكد من توصيل سلك طاقة التيار المتردد بشكل آمن بكل من وحدة إمداد الطاقة والمأخذ الكهربائي في الحائط.
  • Ensure the main power switch on the PSU is in the 'I' (On) position.
  • تأكد من أن منفذ الحائط يعمل عن طريق توصيل جهاز آخر.
  • Use the included 24-pin PSU tester to check if the PSU powers on independently.
• عدم استقرار النظام/الإغلاق العشوائي:
  • Ensure all modular cables, especially the 12V-2x6 PCIe cable, are fully seated and properly connected.
  • Check for any loose connections to the motherboard, CPU, or graphics card.
  • تأكد من أن متطلبات الطاقة لنظامك لا تتجاوز سعة وحدة تزويد الطاقة البالغة 850 واط.
• Fan Not Spinning (iCool ON):
  • If iCool mode is ON, the fan may not spin at low loads. This is normal operation.
  • If the fan does not spin even under load, try switching iCool mode OFF to force continuous fan operation. If it still doesn't spin, contact support.
• ضوضاء غير عادية:
  • تأكد من عدم وجود أي كابلات تعيق المروحة.
  • If the noise persists and is not related to fan operation, contact support.

إذا لم تنجح هذه الخطوات في حل المشكلة، فيرجى الرجوع إلى قسم الضمان والدعم للحصول على مزيد من المساعدة.

8. المواصفات

9. الضمان والدعم

The ASRock Steel Legend SL-850G Power Supply comes with a remarkable ضمان لمدة سنتين, covering defects in materials and workmanship under normal use. For warranty claims or technical support, please contact ASRock customer service through their official webالموقع أو معلومات الاتصال المقدمة في عبوة المنتج الخاص بك.

For the latest drivers, FAQs, and support resources, visit the official ASRock webموقع: www.asrock.com

10. مقاطع فيديو المنتج