معلومات هامة حول السلامة
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- اتبع دائمًا تعليمات التجميع بعناية لمنع عدم الاستقرار أو الانهيار.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- لا تتجاوز سعة الوزن القصوى البالغة 3500 رطل.
محتويات الحزمة
تأكد من وجود كافة المكونات قبل البدء بالتجميع.
- Box Spring Frame Components
- غطاء قماش
- دليل التثبيت
- براغي
- وجع
الإعداد والتجميع
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
الأدوات المطلوبة:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
خطوات التجميع:
- فك مكونات الحزمة: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all listed components are present.
- افتح الإطار: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- اتصالات آمنة: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- تثبيت الشرائح: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- قم بتطبيق غطاء القماش: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
تعليمات التشغيل
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- الموقع: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- وضع المرتبة: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- قدرة الوزن: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- تقليل الضوضاء: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
الصيانة والعناية
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- تنظيف الغطاء: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- تنظيف الإطار: امسح الإطار المعدني بقطعة قماش جافة لإزالة الغبار والأوساخ. تجنب استخدام المواد الكيميائية القاسية أو المنظفات الكاشطة.
- التفتيش الدوري: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
استكشاف الأخطاء وإصلاحها
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| صوت صرير | الوصلات غير المحكمة أو الوضع غير المتساوي. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| عدم الاستقرار/التذبذب | Incomplete assembly or damaged components. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Mattress Sagging | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | ماف |
| رقم الموديل | MAF-MT33-10K |
| مقاس | ملِك |
| أبعاد المنتج | 78.8 بوصة طول × 75.5 بوصة عرض × 10 بوصة ارتفاع |
| حجم المرتبة المتوافق | 80 بوصة طول × 76 بوصة عرض |
| ميزة خاصة | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| نوع التشطيب | مطلي بالمسحوق |
| المكونات المضمنة | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| تعليمات العناية بالمنتج | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| مطلوب التجميع | نعم |
| المسافة من الأرض إلى العنصر | 10 بوصة |
| وزن العنصر | 49.1 رطل |
| الحد الأقصى لوزن السعة | 3500 رطل |
Figure 5: MAF Box Spring Size Chart.
الضمان والدعم
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
