MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote User Manual

1. المقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of the MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote. Please read this manual thoroughly before using the product to ensure proper function and safety.

1.1 المنتج أكثرview

The MiBOXER PUSH2-3 is a 2.4GHz wireless dimming remote designed for controlling compatible LED lighting systems. It offers 3-zone independent dimming control, allowing users to adjust brightness levels across three distinct lighting areas. The remote operates wirelessly, providing flexible placement and ease of use.

1.2 محتويات العبوة

• MiBOXER PUSH2-3 Wireless Dimming Remote
• دليل المستخدم
• Wiring terminals (pre-attached)

الشكل 1: Package contents including the MiBOXER PUSH2-3 remote, its box, and the instruction manual.

الشكل 2: The MiBOXER PUSH2-3 remote with its pre-attached wires and terminals, shown alongside its packaging.

2. معلومات السلامة

يرجى مراعاة احتياطات السلامة التالية لمنع الإصابة أو إتلاف المنتج:

• لا تعرض الجهاز للرطوبة أو درجات الحرارة القصوى.
• Ensure all power is disconnected before installation or wiring.
• هذا الجهاز مخصص للاستخدام الداخلي فقط.
• لا تحاول فك أو تعديل الجهاز.
• يحفظ بعيدًا عن متناول الأطفال.

3. مواصفات المنتج

• 3-Zone Dimming Control: Independently manage brightness for up to three distinct lighting zones.
• تقنية لاسلكية 2.4 جيجا هرتز: Provides reliable and interference-free communication with compatible LED systems.
• توافق واسع: Works with RGB, CCT, and single-color LED systems.
• تصميم مريح: Features an easy-to-use layout for quick brightness adjustments.
• متطلبات البطارية: يتطلب بطارية CR2032 (غير متضمنة).
• الحد الأدنى من الصيانة: Designed for simple operation and long-lasting performance.

4. المواصفات

الشكل 3: Dimensions of the MiBOXER PUSH2-3 remote, showing height (39mm), width (31mm), and depth (11mm).

الشكل 4: Packaging dimensions for the MiBOXER PUSH2-3, indicating a box size of 90mm height, 65mm width, and 21mm depth.

5. الإعداد

5.1 تركيب البطارية

1. حدد مكان حجرة البطارية في الجزء الخلفي من جهاز التحكم عن بُعد.
2. افتح غطاء الحجرة.
3. Insert one CR2032 battery, ensuring correct polarity (+/-).
4. أغلق غطاء حجرة البطارية جيدًا.

5.2 الأسلاك والتوصيلات

The PUSH2-3 remote requires connection to a PUSH switch (sold separately) to control compatible MiBOXER 2.4G series light lamps and controls. The remote provides three output zones (Z1, Z2, Z3) and a common ground (GND).

الشكل 5: Connection diagram illustrating how to connect the PUSH2-3 remote to a PUSH switch and compatible MiBOXER 2.4G series lights. The remote connects to the PUSH switch via GND, Z1, Z2, and Z3 terminals. A CR2032 battery is required for the remote. The control distance is up to 30 meters.

1. Ensure all power to the lighting system is turned off at the circuit breaker before proceeding.
2. Connect the GND wire from the PUSH2-3 remote to the common ground terminal of your PUSH switch.
3. Connect the Z1, Z2, and Z3 wires from the PUSH2-3 remote to the corresponding zone input terminals on your PUSH switch.
4. Refer to the PUSH switch manual for specific wiring instructions for connecting to your MiBOXER 2.4G series light lamps وعناصر التحكم.
5. Once all connections are secure, restore power to the lighting system.

الشكل 6: The MiBOXER PUSH2-3 remote with its cover removed, showing the internal wiring connections and the battery compartment.

6. تعليمات التشغيل

The MiBOXER PUSH2-3 remote works in conjunction with a PUSH switch to control compatible MiBOXER 2.4G series lights.

6.1 إقران جهاز التحكم عن بعد

To pair the PUSH2-3 remote with your MiBOXER 2.4G series lights, follow the pairing instructions provided with your specific MiBOXER light fixture or controller. Typically, this involves:

1. Powering on the light fixture.
2. Within a few seconds, pressing the desired zone button on the PUSH switch (which is connected to the PUSH2-3 remote) multiple times.
3. The light fixture will flash to confirm successful pairing.

6.2 3-Zone Dimming Control

Once paired, you can control the brightness of your lights using the PUSH switch connected to the PUSH2-3 remote. Each zone (Z1, Z2, Z3) corresponds to a specific group of lights or a single light fixture, depending on your setup.

• اختيار المنطقة: Use the corresponding buttons on your PUSH switch to select the desired lighting zone (Z1, Z2, or Z3).
• يعتم: Press and hold the selected zone button to gradually adjust the brightness. Release the button when the desired brightness level is reached.
• تشغيل/إيقاف: A short press of a zone button will typically toggle the lights in that zone on or off.

Note: Specific button functions and dimming behavior may vary slightly depending on the PUSH switch model and the connected MiBOXER light fixture. Refer to their respective manuals for detailed operation.

7. الصيانة

• تنظيف: امسح جهاز التحكم عن بُعد بقطعة قماش ناعمة وجافة. لا تستخدم منظفات أو مذيبات كاشطة.
• استبدال البطارية: Replace the CR2032 battery when the remote's performance degrades or it stops responding. Ensure proper disposal of used batteries according to local regulations.
• تخزين: If storing the remote for an extended period, remove the battery to prevent leakage.

8. استكشاف الأخطاء وإصلاحها

9. الضمان والدعم

This product is manufactured by Miboxer. For warranty information and technical support, please refer to the official MiBOXER webالموقع أو تواصل مع بائع التجزئة. احتفظ بإيصال الشراء كإثبات للشراء.

Manufacturer: Miboxer

تاريخ التوفر الأول: 5 نوفمبر 2024