الدليل+

DALY R24TS-500A

DALY Smart Active Balance BMS 500A 8-24S Instruction Manual

Model: R24TS-500A

1. المقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your DALY Smart Active Balance BMS (Battery Management System). This intelligent BMS is designed for Li-ion, LifePO4, and LTO battery packs, supporting 8 to 24 series configurations with a continuous discharge current of 500A. It features built-in Bluetooth, RS485, and CAN communication for comprehensive monitoring and control.

2. مواصفات المنتج

  • التوازن النشط الذكي: Continuous 1A active balance current with peak current up to 1.2A, ensuring cell voltage equalization for extended battery life.
  • التوافق الواسع: Supports 8-24S Li-ion, LifePO4, and LTO battery packs.
  • Multi-channel Communication: Integrated Bluetooth, RS485, and CAN for versatile monitoring and control via PC software or mobile application.
  • الحماية الشاملة: Protects batteries from overcharge, overdischarge, overcurrent, short circuits, and high-temperature shutdown.
  • Parallel Battery Pack Support: Designed for safe and efficient parallel connection of battery packs.
DALY Smart Active Balance BMS with specifications
Figure 2.1: DALY Smart Active Balance BMS (Model R24TS-500A) showing key specifications like 8-24S battery strings, 500A charge/discharge, 1A balance current, built-in Bluetooth, and UART+RS485+CAN communication.

3. محتويات العبوة

تأكد من تضمين جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

  1. Smart Active Balance BMS
  2. P-&B- cable
  3. Screws (2 Pcs)
  4. Sampكابل لينج
  5. كابل B+
  6. NTC (One standard, two optional)
  7. دليل المستخدم
  8. مربع التعبئة والتغليف
  9. RS485/Can port cable
DALY BMS Packing List showing all included components
Figure 3.1: Visual representation of the DALY BMS package contents, including the BMS unit, various cables, screws, and the user manual.

4. الإعداد والتثبيت

Proper installation is crucial for the safe and efficient operation of the BMS. Follow these steps carefully.

4.1. Battery Pack Wiring

When assembling your battery pack, ensure you correctly identify the total positive and total negative terminals. Pay close attention to the B- and P- terminals on the BMS.

  1. Connect the black B- wire to the total negative terminal of the battery pack.
  2. Connect the red B+ wire to the total positive terminal of the battery pack.
  3. ربط sampling wires in sequence, starting from the negative terminal (B0) and progressing to the positive terminals of each cell string (B1, B2, etc.).
  4. مهم: When soldering the wires, ensure they are soldered in the correct order before plugging them into the BMS. Misfiring protection is limited to 6 strings; incorrect wiring for more than 6 strings can damage your BMS.
  5. If using a BMS compatible with more strings than your battery pack (e.g., an 8-17S BMS for an 8S pack), seal the remaining unused sampling cables with insulation tape.
Diagram showing battery cell wiring to BMS
Figure 4.1: Illustration of connecting the sampling wires from battery cells to the BMS.

4.2. التحقق من الأسلاك

Before connecting the sampling cable to the BMS, verify the voltage of each wire using a multimeter.

  1. Place the black probe of the multimeter on the B0 wire (total negative).
  2. Place the red probe on B1, then B2, and so on. The voltage readings should increase incrementally.
  3. If the multimeter displays positive voltage readings that increase step by step, the wiring is correct.
  4. حذر: During testing, do not let the two probes touch each other, as this may cause a cable short circuit.
Video 4.1: DALY Smart Active Balance BMS introduction and wiring guide. This video demonstrates the correct sequence for connecting the sampling wires to the battery pack and verifying the connections.
Video 4.2: JKBMS Wiring Tutorial. This video provides a visual guide on how to correctly wire the BMS to a battery pack, including connecting the balance leads and main power cables.

4.3. التوصيلات النهائية

  1. Insert the NTC (temperature sensor) cable into the NTC port on the BMS.
  2. Connect the B- wire to the BMS B- terminal.
  3. Plug in the sampling cable connector to the corresponding port on the BMS.
  4. Connect the B+ wire to the BMS B+ terminal.
  5. If the BMS's green light is on, the BMS is working properly.

5. تعليمات التشغيل

The DALY Smart Active Balance BMS offers multiple ways to monitor and configure its parameters.

5.1. Mobile Application (APP)

Download the "BalanceBMS" app from your iOS or Android app store. The app allows you to monitor cell voltages, temperatures, and other parameters in real-time. It also supports cloud monitoring and data logging capabilities.

Video 5.1: JKBMS Android APP Installation Video. This video demonstrates the process of installing the mobile application on an Android device to monitor and control the BMS.

5.2. PC Host Software

For advanced monitoring and configuration, connect the BMS to a PC using the provided UART cable or RS485/CAN port cable. You will need to download the corresponding drivers and PC host software from the DALY webموقع.

  1. Download the PC Host software and necessary drivers (CAN or RS485) from the official DALY webموقع.
  2. Connect the UART cable to the BMS and your PC.
  3. Open the PC Host software. Select the correct communication mode (UART, RS485, or CAN) and port settings.
  4. يسمح لك البرنامج بـ view real-time battery data, including total voltage, current, temperature, SOC, cell voltages, and MOS temperature.
  5. You can also modify various parameters such as balance current, sleep time, rated capacity, and protection parameters.
  6. The software supports switching between Chinese and English languages.
Video 5.2: How to connect the 100balance Smart BMS to the PC host. This video guides users through the process of connecting their Smart BMS to a computer and using the PC host software for monitoring and configuration.

5.3. LCD Screen (Optional Accessory)

An optional LCD screen can be connected to the UART or RS485 port to display real-time battery information and allow parameter changes via a 4.3-inch touch screen.

5.4. Key Switch (Optional Accessory)

The optional key switch can be used to switch the discharge MOSFET on and off. Other functions may also be customized.

5.5. Heating Module (Optional Accessory)

A heating module can be used in cold environments to start the BMS, ensuring optimal performance in low temperatures.

6. الصيانة

To ensure the longevity and optimal performance of your DALY Smart Active Balance BMS, consider the following maintenance tips:

  • قم بفحص جميع توصيلات الأسلاك بشكل منتظم للتأكد من عدم وجود أي تآكل أو إحكام.
  • حافظ على نظام إدارة المباني نظيفًا وخاليًا من الغبار والحطام.
  • Avoid exposing the BMS to extreme temperatures or moisture beyond its operating specifications.
  • Monitor battery cell balance and overall battery health using the mobile app or PC software.
  • Ensure proper ventilation around the BMS, especially for high-current applications.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your DALY Smart Active Balance BMS, refer to the following common troubleshooting steps:

مشكلةالسبب المحتملحل
BMS not powering on (no green light)Incorrect B- or B+ wiring; faulty battery connection.Verify B- and B+ connections to the battery pack. Ensure the battery pack has sufficient voltage.
حجم غير صحيحtage readings in app/softwareغير صحيح sampling wire connection order; loose sampling wires.Re-check sampling wire connections and order. Ensure all wires are securely attached and soldered.
BMS not communicating with app/PCBluetooth/UART/RS485/CAN connection issue; incorrect drivers/software settings.Ensure Bluetooth is enabled on your device. Check cable connections. Verify correct COM port and baud rate in PC software. Reinstall drivers if necessary.
Battery cells out of balanceBalancing function disabled; significant cell voltagوالفرق هو.Ensure active balancing is enabled in the app/PC software. Allow sufficient time for balancing to occur. Check individual cell health.
BMS triggering protection frequentlyOvercharge/overdischarge/overcurrent conditions; incorrect protection parameters.Review battery usage and charging/discharging limits. Adjust protection parameters in the app/PC software if they are too conservative for your battery type and usage.

8. المواصفات

ميزةالتفاصيل
رقم الموديلR24TS-500A
سلاسل البطارية8-24S (24V-84V)
تيار التفريغ المستمر500 أمبير
تيار الشحن المستمر500 أمبير
تيار التوازن النشط1A (Continuous), up to 1.2A (Peak)
توافق نوع البطاريةLi-ion, LifePO4, LTO
واجهات الاتصالBuilt-in Bluetooth, RS485, CAN, UART
أبعاد المنتج7.72 × 4.29 × 1.02 بوصة (196 × 109 × 26 مم)
وزن العنصر1.46 جنيه (660 جرام)
الشركة المصنعةDongguan Daly Electronics Co., Ltd
DALY BMS size chart for various current ratings
Figure 8.1: DALY BMS size chart, showing dimensions for different current ratings. The 500A model has dimensions of 26*195.8*109.3mm.

9. الضمان والدعم

Your DALY Smart Active Balance BMS comes with an 18-month warranty. For any questions, technical assistance, or warranty claims, please contact our customer service. You can find the "BalanceBMS" app on iOS and Android for monitoring and support.

تتوفر خطط حماية إضافية للشراء:

  • خطة الحماية لمدة عامين
  • خطة الحماية لمدة عامين
  • حماية كاملة: خطة واحدة تغطي جميع المشتريات السابقة والمستقبلية المؤهلة.

10. سيناريوهات التطبيق

The DALY Smart Active Balance BMS is suitable for a wide range of multi-purpose, intelligent multi-string applications, including but not limited to:

  • Electric two-wheelers
  • Home energy storage systems
  • Electric tricycles
  • Outdoor energy storage solutions
  • الدراجات الكهربائية
  • Lead-Acid battery upgrades to Lithium
  • Electric wheelchairs
  • المركبات الموجهة آليًا (AGV)
  • Lease battery swapping stations
  • RV energy storage
Various application scenarios for DALY BMS
الشكل 10.1: مثالamples of applications where the DALY BMS can be used, such as electric vehicles, home energy storage, and industrial equipment.

المستندات ذات الصلة - R24TS-500A

قبلview Daly Smart BMS 8-16S 100-200A Product Specification Approval and Manual
Detailed product specification and user manual for the Daly Smart BMS 8-16S 100-200A, covering technical parameters, protection features, LED indicators, communication protocols, and installation instructions.
قبلview DALY Y Series BMS Technical Specifications and Wiring Guide
Detailed technical specifications, wiring diagrams, and interface descriptions for DALY Y Series Battery Management Systems (BMS), including models YH, YK, and YM. Covers cell counts from 4S to 24S and current ratings up to 200A, with information on the Smart BMS mobile application.
قبلview DALY DL-R32U-F012S200ATJ-MM00-S4RV LiFePO4 BMS Technical Specifications
Detailed technical specifications, wiring diagrams, and warranty information for the DALY DL-R32U-F012S200ATJ-MM00-S4RV LiFePO4 12S 36V 200A Battery Management System (BMS) with Balance, UART, and Bluetooth.
قبلview DALY Battery Management System (BMS) User Manual
Comprehensive user manual for the DALY Battery Management System (BMS) with Bluetooth module. Includes information on package contents, safety instructions, connection diagram, activation, and declaration of conformity.
قبلview DALY LiFePO4 8S24V200A BMS مع 4G وGNSS - ورقة البيانات
ورقة البيانات الفنية لنظام إدارة بطاريات DALY LiFePO4 8S24V200A (BMS)، المزود باتصال 4G، ونظام GNSS، وUART، واستشعار درجة الحرارة NTC. تتضمن المواصفات، وتوصيلات الأسلاك، ومعلومات حالة مؤشر LED.
قبلview HELTEC BMS Battery Management Systems Catalog and Specifications
Comprehensive catalog of HELTEC BMS Battery Management Systems (BMS) for various lithium battery configurations (2S, 3S, 4S, 6S, 7S, 8S, 16S). Includes detailed specifications, SKUs, protection voltages, current ratings, dimensions, and applications.