مقدمة
The Ankilo 2-in-1 Bluetooth Transmitter Receiver is a versatile audio adapter designed to enhance your audio experience. It allows you to wirelessly transmit audio from non-Bluetooth devices (like TVs, PCs, or airplane entertainment systems) to Bluetooth headphones or speakers (TX mode), or receive audio from Bluetooth-enabled devices (like smartphones or tablets) and play it through wired speakers or car stereos (RX mode). Featuring Bluetooth 5.3 technology, it offers stable connections, low latency, and clear audio.
Image: The Ankilo 2-in-1 Bluetooth Transmitter Receiver, a compact black device with a 3.5mm audio jack, volume buttons, and a mode switch.
معلومات السلامة
يرجى قراءة معلومات السلامة التالية بعناية قبل استخدام الجهاز:
- احتياطات التعامل مع البطارية: Do not disassemble, puncture, or modify the device. Avoid exposing the battery to extreme temperatures (above 60°C/140°F) or direct sunlight. Dispose of the device and battery according to local regulations.
- التدخل المحتمل: This device operates using radio frequencies and may cause interference with other electronic devices, medical equipment (e.g., pacemakers), or aircraft navigation systems. Always follow regulations and turn off the device where prohibited.
- يحفظ بعيدًا عن متناول الأطفال.
- تجنب إسقاط الجهاز أو تعريضه لصدمات قوية.
- Do not expose to water or excessive moisture.
المنتج انتهىview
Familiarize yourself with the components and controls of your Ankilo Bluetooth Transmitter Receiver.
Image: A detailed diagram showing the components of the Ankilo Bluetooth adapter, including the AUX connector, volume/track buttons, M button (mode/pairing), indicator light, TX/RX switch, and charging port.
- 1. AUX Connector: 3.5mm audio jack for connecting to audio sources or output devices.
- 2. '+' Button: Click for Next Song (RX mode), Long press for Increase Volume.
- 3. '-' Button: Click for Previous Song (RX mode), Long press for Decrease Volume.
- 4. 'M' Button: Multi-function button for mode selection and pairing.
- 5. مؤشر الضوء: يعرض حالة الجهاز (الاقتران، متصل، الشحن).
- 6. TX/RX Switch Button: يُبدّل بين وضع الإرسال (TX) ووضع الاستقبال (RX).
- 7. منفذ الشحن: منفذ USB-C لشحن الجهاز.
الإعداد والتشغيل
شحن الجهاز
Before first use, fully charge the device. Connect the provided USB-C cable to the charging port on the adapter and the other end to a USB power source (e.g., computer USB port, wall adapter). The indicator light will show charging status and turn off when fully charged.
الصورة: انفجار view of the Ankilo Bluetooth adapter showing the internal battery and circuit board, with a USB-C cable connected to the charging port. Text indicates 2 hours charge time, 14 hours RX mode battery life, and 11 hours TX mode battery life.
وضع الإرسال (تكس)
In TX mode, the device transmits audio from a non-Bluetooth source to your Bluetooth headphones or speakers.
- التبديل إلى وضع الإرسال: Slide the TX/RX switch button to the 'TX' position.
- الاتصال بمصدر الصوت: Plug the 3.5mm AUX connector of the adapter into the audio output port of your non-Bluetooth device (e.g., TV, PC, airplane entertainment system).
- تشغيل الطاقة: Long-press the 'M' button for 3 seconds to turn on the adapter. The indicator light will blink red, indicating it's in pairing mode.
- قم بإقرانها مع سماعات الرأس/مكبرات الصوت التي تعمل بتقنية البلوتوث: Put your Bluetooth headphones or speakers into pairing mode. Place them close to the Ankilo adapter. The adapter will automatically search and connect.
- تم الاتصال بنجاح: Once connected, the red indicator light will blink slowly. Audio from your source device will now be transmitted to your Bluetooth headphones/speakers.
ملحوظة: For the first pairing, it may take 1-3 minutes. Subsequent pairings will be faster. Ensure other Bluetooth devices are turned off to avoid interference during pairing.
Image: A visual guide demonstrating the steps for connecting the Ankilo adapter in TX mode, showing the switch, plugging into a TV, and pairing with headphones.
Image: An illustration of the Ankilo adapter being used in TX mode on an airplane, plugged into the seat-back entertainment system, transmitting audio to wireless earbuds.
وضع جهاز الاستقبال (RX)
In RX mode, the device receives audio from a Bluetooth-enabled source (like your smartphone) and plays it through wired speakers or car stereos.
- التبديل إلى وضع الاستقبال (RX): Slide the TX/RX switch button to the 'RX' position.
- قم بالتوصيل بجهاز إخراج الصوت: Plug the 3.5mm AUX connector of the adapter into the audio input port of your wired speaker, car stereo, or home sound system.
- تشغيل الطاقة: Long-press the 'M' button for 3 seconds to turn on the adapter. The indicator light will blink blue, indicating it's in pairing mode.
- إقران مع جهاز بلوتوث: On your smartphone or tablet, enable Bluetooth and search for "BT-13" (or similar device name). Select it to connect.
- تم الاتصال بنجاح: Once connected, the blue indicator light will blink slowly. Audio from your Bluetooth device will now play through your wired speakers.
Image: A visual guide demonstrating the steps for connecting the Ankilo adapter in RX mode, showing the switch, plugging into speakers, and pairing with a smartphone.
Image: An illustration of the Ankilo adapter being used in RX mode in a car, plugged into the car's AUX input, receiving audio from a smartphone.
صيانة
To ensure the longevity and optimal performance of your Ankilo Bluetooth Transmitter Receiver, follow these maintenance guidelines:
- تنظيف: استخدم قطعة قماش ناعمة وجافة لتنظيف الجهاز. لا تستخدم المنظفات السائلة أو البخاخات.
- تخزين: قم بتخزين الجهاز في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- تجنب الأضرار الجسدية: Do not drop, bend, or expose the device to strong impacts.
- الشحن: استخدم فقط كابل USB-C المقدم أو كابل مكافئ معتمد للشحن.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الجهاز لا يعمل. | بطارية منخفضة. | اشحن الجهاز بالكامل باستخدام كابل USB-C. |
| لا يمكن الاقتران بسماعات الرأس/مكبرات الصوت التي تعمل بتقنية البلوتوث (وضع الإرسال). | Headphones/speakers not in pairing mode; adapter not in TX mode; interference from other Bluetooth devices. | Ensure headphones/speakers are in pairing mode. Verify the adapter is switched to TX. Turn off other nearby Bluetooth devices. Try restarting both devices. |
| Cannot connect to smartphone/tablet (RX mode). | Adapter not in RX mode; Bluetooth not enabled on phone; incorrect device selected. | Verify the adapter is switched to RX. Enable Bluetooth on your phone and search for "BT-13". Ensure no other device is connected to the adapter. |
| لا يوجد صوت أو صوت منخفض. | Volume too low on source/receiving device or adapter; incorrect cable connection; device not fully paired. | Adjust volume on all connected devices. Ensure 3.5mm cable is fully inserted. Re-pair the devices. |
| Audio quality is poor or muffled. | التداخل؛ المسافة من الجهاز المقترن؛ البطارية منخفضة. | Reduce distance between devices. Ensure no strong interference sources nearby. Charge the device. |
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | CP322 |
| نسخة البلوتوث | 5.3 |
| أوضاع التشغيل | جهاز الإرسال (TX) والمستقبل (RX) |
| تكنولوجيا الاتصال | بلوتوث ، 3.5 ملم AUX |
| عمر البطارية (وضع الإرسال) | تصل إلى 11 ساعة |
| عمر البطارية (وضع الاستقبال) | تصل إلى 14 ساعة |
| منفذ الشحن | يو اس بي-سي |
| وقت الشحن | حوالي 2 ساعات |
| نطاق التشغيل | يصل إلى 33 قدمًا (10 أمتار) |
| المميزات الخاصة | Low Latency, Hands-Free Calling (RX mode with built-in mic) |
| أبعاد | 4.33 × 2.01 × 0.75 بوصة (حوالي 10.1 × 2.8 × 1.2 سم) |
| وزن | 1.13 أونصات |
الضمان والدعم
Ankilo products are designed for reliability and performance. For any questions or support needs, please contact our customer service.
- خدمة العملاء: Refer to the contact information provided with your product packaging or visit the official Ankilo webموقع للدعم.
- ضمان: This product typically comes with a 12-month quality protection warranty. Please retain your proof of purchase for warranty claims.
- الإرجاعات/الاستبدالات: Refer to the retailer's return policy for details on returns or replacements.
