LEDVANCE Flash Car Emergency Light User Manual

1. انتهى المنتجview

The LEDVANCE Flash Car Emergency Light is a versatile mobile lighting device designed for outdoor use, particularly in emergency situations. It features a robust aluminum housing and integrates essential tools for roadside safety.

Key features include a glass hammer for breaking windows and a seat belt knife for cutting seat belts, enhancing its utility in critical moments. The light offers multiple operating modes for various lighting needs.

This product is classified as a surrounding product, meaning its included light source(s) can be disassembled for separate verification. The light source within this device is of energy efficiency class G.

Image: The LEDVANCE Flash Car Emergency Light, a compact, black, cylindrical device with a light at one end and a textured grip, designed for emergency use.

2. معلومات السلامة

• سلامة البطارية: Use only the specified battery type (4 AAA batteries). Do not mix old and new batteries, or different types of batteries. Ensure correct polarity when inserting batteries. Remove batteries if the device will not be used for an extended period.
• أدوات الطوارئ: The glass hammer and seat belt knife are sharp and designed for emergency use only. Handle with extreme care to prevent injury. Keep out of reach of children.
• مصدر الضوء: Do not look directly into the light beam, as it may cause temporary vision impairment.
• الظروف البيئية: This device is designed for outdoor use but should not be submerged in water. Avoid extreme temperatures.

3. محتويات العبوة

يرجى التحقق من الحزمة للعناصر التالية:

• 1 x LEDVANCE Flash Car Emergency Light (Model: FLASHL CAR BTRY EM FS1 LEDV)

4. الإعداد

4.1 تركيب البطارية

1. Locate the battery compartment. This is typically found by twisting or unscrewing a section of the light's body.
2. Insert 4 AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
3. أغلق حجرة البطارية بشكل آمن.

5. تعليمات التشغيل

5.1 أوضاع التحويل

The LEDVANCE Flash Car Emergency Light features a convenient button for switching between its four operating modes:

• الصحافة الأولى: Activates bright light mode (100 lumens).
• الصحافة الثانية: Switches to soft light mode (70 lumens).
• الصحافة الثالثة: Activates SOS mode (Morse code for SOS).
• الصحافة الرابعة: Activates flashing mode.
• Subsequent presses will cycle through the modes or turn the light off, depending on the model's specific sequence.

5.2 Adjusting Light Beam Angle

The angle of the light beam can be adjusted by turning the lens of the device. Rotate the lens clockwise or counter-clockwise to achieve the desired focus or spread of light.

5.3 عمر البطارية

The light provides approximately 1.5 hours of operation at full brightness (100 lumens) with fresh batteries.

6. الصيانة

• تنظيف: امسح الجهاز بقطعة ناعمة ، دamp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
• استبدال البطارية: Replace all 4 AAA batteries when the light output diminishes or the device stops functioning. Refer to Section 4.1 for battery installation.
• تخزين: Store the light in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.

7. استكشاف الأخطاء وإصلاحها

• الضوء لا يعمل:
  • تأكد من إدخال البطاريات بشكل صحيح مع القطبية الصحيحة.
  • استبدل البطاريات القديمة أو المستنفدة بأخرى جديدة.
  • تأكد من إغلاق حجرة البطارية بشكل آمن.
• الضوء خافت أو متقطع:
  • قد تكون البطاريات منخفضة. استبدلها ببطاريات جديدة.

8. المواصفات

9. الضمان والدعم

For warranty information or technical support, please refer to the documentation provided with your purchase or contact LEDVANCE customer service directly. Keep your proof of purchase for warranty claims.