دليل مستخدم مجموعة المكنسة الكهربائية والممسحة الروبوتية Lubluelu

1. المقدمة

This user manual provides comprehensive instructions for the operation, maintenance, and troubleshooting of your Lubluelu Robot Vacuum and Mop Combo, model SL60. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Figure 1.1: Lubluelu Robot Vacuum and Mop Combo (Model SL60)

2. ماذا يوجد في الصندوق

تأكد من وجود جميع المكونات عند إخراج المنتج من العلبة:

• 1 x SL60W Robot Vacuum
• 1 x 2-in-1 Dustbin and Water Tank
• شنومكس x قاعدة الشحن
• 1 × محول الطاقة
• 1 x Mop Cloth
• 1 x Mop Holder
• 1 × دليل المستخدم
• شنومكس x الجانب فرشاة
• 1 x تنظيف أداة

3. مواصفات المنتج

The Lubluelu SL60 Robot Vacuum and Mop Combo is equipped with advanced features designed for efficient and thorough home cleaning.

3.1 Precision Laser Mapping and Navigation

Utilizes LDS9.0 LiDAR mapping technology for highly accurate mapping and efficient route planning. It can store up to 5 maps, allowing for customized cleaning plans across multiple floors.

Figure 3.1: Multi-Floor Mapping Capability

3.2 Powerful Suction and 2-in-1 Cleaning

Features a brush-less motor with 4000Pa suction power and three adjustable modes. The 2-in-1 design allows for simultaneous vacuuming and mopping. The precision micro-control water pump offers 3 levels of water flow (High/Medium/Low) for effective wet cleaning, including Y-shaped mopping to imitate manual cleaning.

Figure 3.2: Efficient Pet Hair and Debris Cleaning

Figure 3.3: Adjustable Water Levels for Mopping

3.3 التطبيق الذكي والتحكم الصوتي

Control the robot vacuum via the Smart Life APP to monitor cleaning routes, set schedules, adjust suction and water levels, change cleaning modes, and create No-Go Zones. Compatible with Amazon Alexa and Google Assistant for voice commands (2.4GHz Wi-Fi network required).

Figure 3.4: App and Voice Control Interface

3.4 Customized Cleaning and No-Go Zones

Offers various cleaning modes including automatic, edge, zone, spot, double, and scheduled cleaning. Users can define up to 10 No-Go Zones to restrict access to specific areas like carpets or children's play areas.

Figure 3.5: Setting Up No-Go Zones

3.5 Continuous Cleaning and Self-Charging

When the battery level drops to 15% or below, the robot automatically returns to its charging base. Once charged to 80%, it resumes cleaning from where it left off, ensuring complete coverage without interruption.

Figure 3.6: Breakpoint Continuous Cleaning

3.6 Obstacle Clearance and Sensors

Equipped with 22 sensors and upgraded AI recognition technology for accurate obstacle avoidance and anti-collision performance. It can easily cross obstacles up to 18mm (0.71 inches) and features anti-fall sensors to prevent falls from stairs or edges.

Figure 3.7: Anti-Drop and Anti-Collision Features

3.7 Boost IQ Technology and Low Noise Operation

Automatically increases suction power when detecting carpet for deeper cleaning. Operates at a low noise level of 55dB, minimizing disturbance during cleaning cycles.

Figure 3.8: Boost IQ Technology for Carpet Cleaning

Figure 3.9: Low Noise Operation (55dB)

4. دليل الإعداد

4.1 التفريغ والتنسيب

1. قم بإزالة المكنسة الروبوتية وجميع الملحقات من العبوة بعناية.
2. Choose a suitable location for the charging base. Ensure it is against a wall, with at least 0.5 meters (1.6 feet) of clear space on either side and 1.5 meters (4.9 feet) in front.
3. Plug the power adapter into the charging base and then into a wall outlet. Ensure the indicator light on the charging base illuminates.

4.2 الشحن الأولي

Place the robot vacuum onto the charging base, ensuring the charging contacts align. The robot will begin charging automatically. For first-time use, fully charge the robot before operation (approximately 4-5 hours).

4.3 App Connection (Smart Life APP)

1. Download the "Smart Life" app from your mobile device's app store (iOS or Android).
2. قم بالتسجيل أو تسجيل الدخول إلى حساب Smart Life الخاص بك.
3. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network. The robot vacuum only supports 2.4GHz Wi-Fi.
4. Follow the in-app instructions to add your Lubluelu SL60 robot vacuum. This typically involves resetting the robot's Wi-Fi (refer to the robot's specific button combination for Wi-Fi reset, usually holding down the power button and home button simultaneously until a voice prompt is heard).
5. Once connected, you can name your robot and access all smart features.

5. تعليمات التشغيل

5.1 بدء دورة التنظيف

• عبر أزرار الروبوت: Press the power button on the robot to start an automatic cleaning cycle. Press again to pause.
• عبر تطبيق Smart Life: Open the app, select your robot, and tap "Start Cleaning". You can choose specific cleaning modes (Auto, Edge, Zone, Spot) and adjust suction power/water levels.
• عبر التحكم الصوتي: Once integrated with Amazon Alexa or Google Assistant, use voice commands such as "Alexa, ask RoboVac to start cleaning." (Note: Voice commands are generally limited to starting/stopping cleaning).

5.2 استخدام وظيفة المسح

1. Fill the 2-in-1 dustbin and water tank with clean water.
2. Attach the mop cloth to the mop holder and then slide the mop holder onto the robot.
3. In the Smart Life app, select the desired water flow level (Low, Medium, High) for mopping.
4. Start a cleaning cycle. The robot will perform Y-shaped mopping for thorough wet cleaning.

Figure 5.1: Electronic Water Pump for Controlled Mopping

5.3 Map Management and Customization

After the first cleaning cycle, the robot will generate a map of your home. You can manage and customize this map in the Smart Life app:

• Multi-Map Storage: Save up to 5 different maps for multi-floor homes.
• Room Editing: Divide, merge, or rename rooms on the map.
• المناطق المحظورة: Draw virtual boundaries to prevent the robot from entering specific areas.
• تنظيف المنطقة: حدد مناطق معينة على الخريطة لتنظيفها بشكل مستهدف.
• التنظيف المقرر: Set cleaning schedules for specific rooms or the entire house at designated times.

Figure 5.2: Customized Cleaning Preferences via App

Figure 5.3: Scheduled Cleaning Example

6. الصيانة والعناية

تضمن الصيانة الدورية الأداء الأمثل وتطيل عمر مكنسة الروبوت الخاصة بك.

6.1 تنظيف صندوق القمامة والفلتر

• قم بإفراغ سلة المهملات بعد كل دورة تنظيف.
• Remove the HEPA filter and tap it gently to remove dust. Do not wash the HEPA filter with water.
• Rinse the dustbin and pre-filter with water. Ensure they are completely dry before reinserting.

6.2 الفرشاة الرئيسية والفرش الجانبية

• Remove the main brush and use the provided cleaning tool to cut and remove tangled hair or debris.
• Inspect side brushes for wear or damage. Replace them if necessary (typically every 3-6 months, depending on usage).

6.3 Mop Cloth and Water Tank

• Remove and wash the mop cloth after each mopping session. Air dry completely.
• Empty any remaining water from the water tank after use to prevent mold or odors.

6.4 أجهزة الاستشعار وموصلات الشحن

• Wipe the anti-drop sensors, anti-collision sensors, and charging contacts on both the robot and the charging base with a clean, dry cloth regularly.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your Lubluelu SL60, refer to the following common problems and solutions:

8. المواصفات الفنية

Note: Product dimensions provided as 32.5"L x 32.5"W x 9.3"H. Please refer to the product packaging for exact measurements.

Figure 8.1: SL60D Features Comparison

9. الضمان والدعم

Lubluelu is committed to providing full life-cycle technical support for its products. If you encounter any issues during the use of your robot vacuum, please contact our professional FAE technical support team.

For assistance, please send us a message detailing the problem you are experiencing. Our team is ready to help resolve any issues you may face.

For more information and support resources, visit the official Lubluelu store: Lubluelu Official Store