مقدمة
This manual provides detailed instructions for the assembly, operation, and maintenance of your Serpent F190 1/8 4WD Electric Formula 1 Car Kit. Please read this manual thoroughly before beginning assembly or operation to ensure proper function and safety. The F190 is engineered for maximum performance, featuring carbon fiber components, aluminum bulkheads, and advanced suspension geometry for precision and agility on the track.
محتويات الحزمة
The Serpent F190 kit includes the following components:
- Carbon Fiber Chassis and Bulkheads
- Transparent PC Car Body Shell
- High-Performance Rubber Tires and Wheels
- Solid Front Spool
- 7075-T6 Aluminum Motor Mount with Slide Mechanism
- Oil-Filled Coil-Over Shocks
- Front Push-Rod Shock Geometry Components
- Rear Pull-Rod Shock Geometry Components
- Adjustable Caster Blocks
- Aerodynamic Front and Rear Wings, Underfloor, and Diffuser
- دليل المنتج (هذه الوثيقة)
Note: Electronics (motor, ESC, battery, servo, receiver, transmitter) are not included and must be purchased separately.
معلومات السلامة
WARNING: This product is a high-performance remote-controlled vehicle kit. It is not a toy. Adult supervision is required. Improper assembly or operation can result in injury or damage.
- سلامة البطارية: This kit does not include a battery. Always use batteries recommended by the manufacturer of your chosen electronics. Follow all battery charging, handling, and storage instructions provided by the battery manufacturer. Never leave charging batteries unattended.
- الالكترونيات: Ensure all electronic components (motor, ESC, servo, receiver) are correctly installed and configured according to their respective manuals. Incorrect wiring can cause damage or fire.
- حَشد: Follow all assembly steps carefully. Use appropriate tools and ensure all screws are tightened securely.
- منطقة العملية: Operate the vehicle in open areas away from people, pets, and obstacles. Avoid public roads and areas with traffic.
- أجزاء متحركة: Keep fingers, hair, and loose clothing away from rotating parts such as wheels, gears, and drive shafts.
- حرارة: Electronic components, especially the motor and ESC, can become very hot during operation. Allow them to cool before handling.
يثبت
The Serpent F190 is a kit that requires assembly and installation of electronics. Follow these general steps:
- تجميع الهيكل: Begin by assembling the carbon fiber chassis and aluminum bulkheads. Refer to the detailed diagrams for correct component placement and screw tightening.
- تركيب التعليق: Install the front push-rod and rear pull-rod suspension systems, including the oil-filled shocks. Adjust caster, camber, and Ackerman geometry as desired for initial setup.
- Drivetrain Assembly: Assemble the main drivetrain, including the solid front spool and rear differential. Ensure all gears mesh smoothly.
- جبل المحرك: Install the 7075-T6 aluminum motor mount. This mount features a slide mechanism for easy gear mesh adjustment.
- تركيب الالكترونيات: Mount your chosen brushless motor, Electronic Speed Controller (ESC), steering servo, receiver, and battery (not included). Ensure all wiring is neat and secure, avoiding interference with moving parts.
- Tire and Wheel Assembly: Mount the high-performance rubber tires onto the wheels.
- Body Shell Preparation: Trim and paint the transparent PC car body shell according to your preference. Install the aerodynamic elements such as the front and rear wings, underfloor, and diffuser.
- Radio System Setup: Bind your receiver to your transmitter. Calibrate the ESC and steering servo according to their respective manuals.
تعليمات التشغيل
Once your Serpent F190 is fully assembled and electronics are installed and calibrated, follow these steps for operation:
- تشغيل الطاقة: Turn on your transmitter first, then connect the battery to the ESC on the vehicle.
- فحص ما قبل التشغيل: Verify that the steering and throttle respond correctly to transmitter inputs. Check for any loose screws or damaged parts.
- القيادة: Use the throttle trigger for acceleration and braking. Use the steering wheel for directional control. Start with gentle inputs to familiarize yourself with the vehicle's handling characteristics.
- التعديلات: The F190 offers extensive tuning options. Experiment with adjustable camber, caster, and Ackerman geometry to optimize performance for different track conditions and driving styles.
- إيقاف التشغيل: افصل البطارية عن وحدة التحكم الإلكترونية أولاً، ثم قم بإيقاف تشغيل جهاز الإرسال الخاص بك.
صيانة
Regular maintenance is crucial for the longevity and performance of your Serpent F190:
- تنظيف: After each run, clean the vehicle to remove dirt, dust, and debris. Use a soft brush or compressed air. Avoid using water directly on electronics.
- فحص المسمار: Periodically check all screws and fasteners for tightness. Vibrations during operation can cause them to loosen.
- Drivetrain Inspection: Inspect gears, drive shafts, and bearings for wear or damage. Lubricate moving parts as needed with appropriate RC lubricants.
- صيانة الصدمات: Check the oil-filled shocks for leaks and proper damping. Replace shock oil and O-rings as necessary.
- تآكل الإطارات: Monitor tire wear and replace worn tires to maintain optimal grip and handling.
- Electronics Care: Keep electronic components clean and dry. Ensure proper ventilation to prevent overheating.
استكشاف الأخطاء وإصلاحها
If you encounter issues with your Serpent F190, refer to the following common troubleshooting tips:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| السيارة لا تستجيب | Low battery, loose connection, unbinded radio | Charge battery, check all connections, re-bind radio system |
| استجابة توجيه ضعيفة | Incorrect trim, damaged servo, loose steering linkages | Adjust steering trim, inspect/replace servo, tighten linkages |
| ارتفاع درجة حرارة المحرك | Incorrect gearing, excessive load, poor ventilation | Check gear mesh, reduce load, ensure proper airflow to motor/ESC |
| أصوات غير عادية من مجموعة نقل الحركة | Damaged gears, debris in gears, worn bearings | Inspect/replace gears, clean drivetrain, replace worn bearings |
تحديد
- ماركة: الثعبان
- رقم الموديل: 300030
- حجم: 1/8
- يقود: الدفع الرباعي الكهربائي
- مادة الهيكل: ألياف الكربون
- Bulkhead Material: الألومنيوم
- جبل المحرك: 7075-T6 Aluminum with Slide
- تعليق: Front Push-Rod, Rear Pull-Rod with Oil-Filled Shocks
- Front Spool: صلب
- العمر الموصى به: 16 سنوات وما فوق
- وزن السلعة: 5.79 رطل
- أبعاد المنتج: 1 x 1 x 1 inches (Note: These dimensions appear to be placeholder values and may not reflect the actual product size.)
معرض الوسائط
صور المنتج
مقاطع فيديو رسمية للمنتج
الضمان والدعم
For warranty information, technical support, and spare parts, please refer to the official Serpent webقم بزيارة الموقع الإلكتروني أو اتصل بالوكيل المعتمد. احتفظ بإيصال الشراء كإثبات للشراء لأي مطالبات ضمان.
Manufacturer: Serpent
