1. المقدمة
Thank you for choosing the SilverStone NovaPeak 240 ARGB All-in-one Liquid Cooler. This product is designed to provide efficient cooling for your Intel or AMD processor while offering customizable ARGB lighting effects. This manual provides essential information for proper installation, operation, and maintenance of your liquid cooler.
Image 1.1: SilverStone NovaPeak 240 ARGB Liquid Cooler with two ARGB fans and pump head.
2. معلومات السلامة
Please read and understand the following safety precautions before installation and operation:
- تأكد من إيقاف تشغيل النظام وفصله عن مقبس الحائط قبل التثبيت.
- تعامل مع المكونات بعناية لتجنب التلف.
- Do not attempt to open or modify the liquid cooler components.
- احفظ المنتج بعيدًا عن الرطوبة ودرجات الحرارة القصوى.
- If any leakage is observed, immediately power off your system and contact support.
3. محتويات العبوة
تأكد من وجود جميع المكونات في العبوة:
- NovaPeak 240 ARGB Liquid Cooler (Radiator, Pump, Tubing)
- 2x 120mm ARGB Radiator Fans
- Mounting Hardware for Intel LGA 115x/1200/1700/1851/2011/2066 sockets
- Mounting Hardware for AMD AM5/AM4 sockets
- تحكم ARGB
- المعجون الحراري
- دليل المستخدم
4. دليل التثبيت
Follow these steps carefully for proper installation. Refer to your motherboard and PC case manuals for specific guidance on component placement.
4.1. تجهيز المبرد والمراوح
- Attach the two 120mm ARGB fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically exhausting air out of the case).
- Connect the fan PWM and ARGB cables. The NovaPeak fans feature a modular cabling design for streamlined connectivity, allowing daisy-chaining.
Image 4.1: Fans connected via daisy-chain for simplified cable management.
4.2. تركيب المبرد
- Mount the radiator assembly into your PC case. Common mounting locations include the top or front of the case. Secure it with the appropriate screws.
الصورة 4.2: الجانب view of the radiator with fans attached.
4.3. Prepare the CPU and Pump
- Clean the CPU surface thoroughly to remove any old thermal paste or debris.
- قم بوضع كمية صغيرة من المعجون الحراري (نقطة بحجم حبة البازلاء) على مركز موزع الحرارة المتكامل (IHS) الخاص بوحدة المعالجة المركزية.
Image 4.3: The pump's copper baseplate, designed for firm contact with the processor.
4.4. Mount the Pump to the CPU
- Select the appropriate mounting bracket for your CPU socket (Intel or AMD).
- Attach the chosen bracket to the pump head.
- Carefully place the pump head onto the CPU, aligning the mounting holes.
- Secure the pump head to the motherboard using the provided screws and backplate (if required for your socket type). Tighten screws in a diagonal pattern until snug.
4.5. إدارة الكابلات
- Connect the pump's 3-pin power cable to an available fan header on your motherboard (often labeled 'AIO_PUMP' or 'CPU_OPT').
- Connect the ARGB cables from the fans and pump to the included ARGB controller.
- Connect the ARGB controller to a SATA power connector from your power supply and to a 3-pin 5V ARGB header on your motherboard (if you wish to control lighting via motherboard software).
- Organize all cables to ensure proper airflow and a clean build.
5. التشغيل
Once installed, the NovaPeak 240 ARGB Liquid Cooler operates automatically based on your system's thermal load. The pump and fans will adjust their speed to maintain optimal CPU temperatures.
5.1. التحكم في إضاءة ARGB
The included ARGB controller allows you to cycle through 10 lighting modes, adjust brightness, and change light speed. Alternatively, if connected to a compatible motherboard ARGB header, you can control the lighting effects using your motherboard's synchronization software.
Image 5.1: Close-up of the pump head showcasing ARGB lighting.
6. الصيانة
تضمن الصيانة الدورية الأداء الأمثل وطول عمر مبرد السوائل الخاص بك.
- تنظيف الغبار: نظّف الغبار من زعانف المبرد وشفرات المروحة بشكل دوري باستخدام الهواء المضغوط أو فرشاة ناعمة. تأكد من توقف المراوح عن الدوران أثناء التنظيف.
- فحص الأنابيب: Visually inspect the tubing for any signs of kinks, damage, or leaks.
- ضجيج المضخة: The pump is designed for quiet operation. If unusual noises occur, ensure proper mounting and contact support if the issue persists.
7. استكشاف الأخطاء وإصلاحها
إذا واجهت أي مشكلات، راجع المشكلات والحلول الشائعة التالية:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| درجات حرارة وحدة المعالجة المركزية عالية | Improper thermal paste application, loose pump mounting, insufficient airflow, pump failure. | Reapply thermal paste, check pump mounting, ensure fans are correctly oriented, verify pump is powered. |
| Fans Not Spinning / ARGB Not Lighting Up | Incorrect cable connections, faulty ARGB controller, insufficient power. | Check all PWM and ARGB connections, ensure SATA power is connected to the controller, test with different ARGB header if possible. |
| Unusual Pump Noise | Air bubbles in the loop, pump malfunction. | Orient the radiator higher than the pump if possible to allow air to collect in the radiator. If noise persists, contact support. |
8. المواصفات
Key technical specifications for the SilverStone NovaPeak 240 ARGB Liquid Cooler:
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | SST-NP240-ARGB |
| مادة المبرد | الألومنيوم |
| المواد الأساسية للمضخة | نحاس |
| سرعة المروحة | 500 - 2,200 دورة في الدقيقة (يتم التحكم فيها بواسطة PWM) |
| مستوى الضوضاء | 12.1 ديسيبل (حد أدنى) |
| المقابس المتوافقة | Intel LGA 115x/1200/1700/1851/2011/2066, AMD AM5/AM4 |
| طول الأنابيب | 460 ملم |
| تصميم المضخة | Three-phase, six-pole motor |
Image 8.1: The pump's three-phase, six-pole motor design for smooth and quiet operation.
9. الضمان والدعم
SilverStone Technology provides a limited warranty for this product. Please refer to the official SilverStone website or your product packaging for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please visit the official SilverStone Technology support page or contact their customer service directly. You can find contact information on their webموقع: www.silverstonetek.com
