دليل مستخدم جهاز التشخيص LAUNCH CRP129i V2.0 OBD2

مقدمة

The LAUNCH CRP129i V2.0 is an advanced automotive diagnostic scan tool designed for comprehensive vehicle system analysis. It provides diagnostic functions for Engine, Transmission, Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS), along with various reset and maintenance services. This manual provides instructions for the proper setup, operation, and maintenance of your device.

ماذا يوجد في الصندوق

• 1* LAUNCH CRP129I V2.0 OBD2 Scanner
• 1* OBDII Diagnostic Cable
• 1 * DC 5V Charging Cable
• 1 * دليل المستخدم
• 1 * Storage Pack

يثبت

1. الشحن الأولي: Before first use, connect the device to the DC 5V Charging Cable and allow it to charge for approximately 8 hours. The device typically ships with no battery charge.
2. تشغيل الطاقة: اضغط مع الاستمرار على زر الطاقة لتشغيل الجهاز.
3. اتصال واي فاي: Follow the on-screen prompts to connect the device to a Wi-Fi network. This is necessary for software updates. Initial updates may take up to 45 minutes to download and install automatically.
4. اتصال السيارة: Locate your vehicle's OBDII port, usually under the dashboard on the driver's side. Connect the OBDII Diagnostic Cable from the scanner to the vehicle's OBDII port. Ensure the vehicle's ignition is in the 'ON' position (engine can be off).

تعليمات التشغيل

The CRP129i V2.0 features a touchscreen interface and physical navigation buttons for ease of use.

1. 4-System Diagnosis (Engine, Transmission, ABS, SRS)

This tool allows for comprehensive diagnostics across four critical vehicle systems. When a warning light appears for any of these systems, the scanner can identify the root cause.

• نظام المحرك: Retrieves fault codes (DTCs) and real-time sensor data related to engine performance, fuel supply, ignition, intake, and exhaust systems.
• نظام النقل: Diagnoses issues related to engine power transmission to the wheels, including the transmission, clutch, and drive shafts. It can retrieve fault codes, check fluid levels, and inspect sensors.
• نظام ABS: Identifies problems within the anti-lock braking system, which prevents wheel lockup during emergency braking. Reads ABS-related fault codes and checks wheel speed and pressure sensors.
• نظام SRS: Reads and clears DTCs for the Supplemental Restraint System, addressing issues with airbags, seat belt pretensioners, and the SRS ECU.

Image: LAUNCH CRP129i V2.0 displaying diagnostic options for Engine, Transmission, ABS, and SRS systems.

Image: Screen of LAUNCH CRP129i V2.0 showing system selection menu for Powertrain Control Module, Transmission Control Module, ABS, and Restraint Control Module.

2. 12 Reset Functions

The CRP129i V2.0 offers 12 essential reset and maintenance functions. Function availability may vary by vehicle model.

• إعادة ضبط الزيت: يعيد ضبط نظام عمر الزيت بعد تغيير الزيت.
• تجديد مرشح جسيمات الديزل (DPF): يدير عملية تجديد مرشح جسيمات الديزل.
• إعادة تعيين TPMS: يعيد ضبط مستشعرات نظام مراقبة ضغط الإطارات.
• نزيف ABS: يقوم بتفريغ الهواء من نظام الفرامل لاستعادة حساسية نظام منع انغلاق المكابح (ABS).
• ترميز الحاقن: يقوم بإرسال أرقام الحاقن الجديدة إلى وحدة التحكم الإلكترونية.
• Air/Fuel Reset: يقوم بضبط معايير نسبة الهواء إلى الوقود.
• تعديل الخانق: يعيد ضبط وضعية جسم الخانق.
• إعادة تعيين BMS: يعيد ضبط نظام إدارة البطارية.
• معايرة ساس: يقوم بمعايرة مستشعر زاوية التوجيه.
• إعادة ضبط فرامل الانتظار الإلكترونية: يعيد ضبط فرامل الانتظار الإلكترونية.
• عنوان AFSamp إعادة تعيين: يعيد ضبط نظام الإضاءة الأمامية التكيفي.
• إعادة ضبط نظام AdBlue: يعيد ضبط نظام اليوريا بعد الصيانة.

Image: LAUNCH CRP129i V2.0 displaying 12 maintenance services.

3. Full OBD2 Functionality

The scanner supports all 10 OBD2 modes, ensuring comprehensive emissions-related diagnostics for vehicles post-1996, including OBDII, EOBD, and CAN standards.

4. Real-Time Live Data & Battery Monitoring

View real-time data streams in a 4-in-1 merged graph format, including parameters like oil temperature, speed, and tire pressure. Data can be recorded, replayed, and shared via email. The integrated battery monitoring function assesses battery health and voltagالمستويات الإلكترونية.

Image: LAUNCH CRP129i V2.0 displaying a real-time data stream graph.

Image: LAUNCH CRP129i V2.0 displaying a battery voltagه الرسم البياني.

5. Auto VIN Scan & Diagnostic Reports

The device automatically identifies your vehicle's brand, model, and year via VIN scanning. After diagnosis, detailed reports can be viewed, shared, or printed for thorough analysis.

6. FCA AutoAuth Access

For 2017 and newer FCA (Chrysler, Jeep, Dodge, Fiat) vehicles with a Secure Gateway Module (SGW), the tool supports FCA AutoAuth for diagnostics and bidirectional features.

Image: The LAUNCH CRP129i V2.0 OBD2 Scanner Diagnostic Tool.

صيانة

• تحديثات البرامج: Regularly connect the device to Wi-Fi to download and install the latest software updates. This ensures optimal performance and compatibility with new vehicle models.
• تنظيف: Use a soft, dry cloth to clean the device's screen and exterior. Avoid abrasive cleaners or solvents.
• تخزين: Store the scanner in its provided storage pack in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

استكشاف الأخطاء وإصلاحها

• الجهاز لا يعمل: Ensure the device is fully charged or connected to the vehicle's OBDII port. Check the charging cable connection.
• لا يوجد اتصال بالمركبة: Verify the OBDII cable is securely connected to both the scanner and the vehicle's port. Ensure the vehicle's ignition is on. Check vehicle compatibility.
• تحديث المشكلات: Ensure a stable Wi-Fi connection. If updates fail, try restarting the device and your Wi-Fi router.
• قراءات غير دقيقة: Ensure the vehicle's VIN is correctly identified. Consult the vehicle's service manual for expected parameter values.

تحديد

الضمان والدعم

LAUNCH offers a 5-year warranty against manufacturer defects. For any issues or assistance, please contact LAUNCH customer support. For immediate concerns within the initial purchase period, refer to the retailer's return policy.