دليل مستخدم جهاز النقش بالليزر SCULPFUN S30

مقدمة

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Laser Engraver. Please read it thoroughly before setup and use to ensure optimal performance and safety.

Figure 1: SCULPFUN S30 Laser Engraver with various engraved samples including a wallet, business cards, and a wooden insect model.

معلومات السلامة

Operating a laser engraver involves potential hazards. Adhere strictly to the following safety guidelines:

• حماية العين: Always wear appropriate laser safety goggles (Laser Class IV) when the laser is active. Never look directly at the laser beam.
• تهوية: Operate the engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting.
• خطر الحريق: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation. The S30 includes an emergency power switch for quick shutdown.
• التوافق المادي: Only engrave or cut materials safe for laser processing. Avoid PVC, vinyl, and other materials that produce toxic fumes.
• حماية سطح العمل: Use the provided A4 size steel mat or a similar fire-resistant surface to protect your workbench from laser damage.
• الأطفال والحيوانات الأليفة: احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن منطقة التشغيل.
• السلامة الكهربائية: Ensure the power supply is correctly connected and grounded. Do not operate with wet hands or in damp شروط.

مميزات المنتج

The SCULPFUN S30 Laser Engraver incorporates advanced features for precision and efficiency:

• Automatic Air Assist: Equipped with an automatically controlled air pump. This feature intelligently manages air-assist via the M8 button in LightBurn software, directing high-pressure airflow through the metal nozzle. This significantly increases cutting speed (over 5 times faster) and improves cutting performance by clearing debris and reducing charring.
• Ultra-fine Laser Modeling Technology: Features a precise 0.005mm industrial linear guide and a laser focus of 0.06x0.06mm. This results in higher energy density, stronger cutting penetration, and enhanced engraving accuracy, eliminating wave lines in engravings.
• تصميم آمن ومستقر: Constructed from high-strength aluminum alloy, capable of supporting up to 50kg. Includes an emergency power switch for immediate shutdown and an A4 size steel mat to protect surfaces.
• Expandable Engraving Area: The original working area is approximately 400x400mm. It can be expanded to 935x400mm with a Y-axis extension kit, or further to 935x905mm with an XY-axis extension kit (sold separately), accommodating larger projects.
• التوافق الواسع: The latest 32-bit motherboard supports automatic Air-Assist control. Features Bluetooth and SD card offline printing. Compatible with LightBurn (with M8 air support), LaserGRBL, Benbox, GrblController, and LiteFire. Supports Windows and MAC systems. File formats include NC, BMP, JPG, PNG, DXF, and other image formats.
• مخرج الليزر: Class IV laser with 5000mW output power.

Figure 2: Illustration of the S30's high-density, sharp laser beam and 5W powerful laser beam shaping technology.

Figure 3: Close-up of the S30's built-in high-pressure air assist nozzle, demonstrating airflow.

Figure 4: Diagram showing the automatic controlled air assist feature and its integration with LightBurn software (M8 Air Assist Switch).

Figure 5: Comparison illustrating the benefits of automatic air assist over traditional manual air pumps for clean edges and efficient cutting.

Figure 6: Visual representation of the high precision 0.005mm industrial grade linear rail, highlighting the improved engraving accuracy without wavy lines.

دليل الإعداد

Follow these steps to set up your SCULPFUN S30 Laser Engraver:

1. فك التعبئة: Carefully remove all components from the packaging. Verify all parts are present against the packing list.
2. حَشد: Assemble the frame according to the included assembly instructions. Ensure all screws are tightened securely.
3. تركيب وحدة الليزر: Mount the laser module onto the gantry. Connect the laser module cable to the main control board.
4. اتصال مضخة الهواء: Connect the air pump to the designated port on the laser module and the main control board.
5. Power and USB Connection: Connect the power adapter to the engraver and a power outlet. Connect the engraver to your computer via the provided USB cable.
6. تثبيت البرنامج: Install the recommended software (e.g., LightBurn, LaserGRBL) on your computer. Drivers may be required.
7. المعايرة الأولية: Follow the software's instructions for initial calibration, including setting the working area and focusing the laser.

الشكل 7: انتهىview of the SCULPFUN S30 components, including the laser module, air pump, and frame parts.

تعليمات التشغيل

This section outlines the basic steps for operating your laser engraver:

1. تحضير المواد: Place the material to be engraved or cut on the work surface, ensuring it is flat and secure. Use the steel mat underneath.
2. إعداد البرنامج: Open your chosen laser control software (e.g., LightBurn). Import or create your design.
3. إعدادات المعلمة: Adjust laser power, speed, and passes based on the material and desired effect. Refer to material test guides for optimal settings.
4. ركز الليزر: Manually or automatically adjust the laser focus for optimal performance. The S30 features a fixed-focus laser, simplifying this step.
5. Enable Air Assist: For cutting operations, ensure the automatic air assist is enabled in the software (M8 command in LightBurn). For engraving, it may be turned off for finer details.
6. بدء العملية: Initiate the engraving or cutting process from the software. Monitor the process closely.
7. انتهاء: Once the process is complete, wait for the laser to stop and fumes to clear before removing the material.

صيانة

Regular maintenance ensures the longevity and performance of your engraver:

• تنظيف العدسة: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain optimal laser focus and power. The S30 features a replaceable lens for easy maintenance.
• تنظيف منطقة العمل: قم بإزالة الحطام والغبار من سطح العمل المصنوع من قرص العسل والمناطق المحيطة به بعد كل استخدام.
• Lubricate Rails: Apply a small amount of lubricant to the linear guide rails periodically to ensure smooth movement of the laser module.
• التحقق من الاتصالات: Regularly inspect all cable connections for looseness or damage.

استكشاف الأخطاء وإصلاحها

القضايا المشتركة وحلولها:

تحديد

• نموذج: xxl-S30 5W
• قوة إخراج الليزر: 5W
• منطقة النقش: 400mm x 400mm (Expandable to 935mm x 400mm or 935mm x 905mm with extension kits)
• تركيز الليزر: 0.06 مم × 0.06 مم
• Linear Guide Accuracy: 0.005 ملم
• اللوحة الأم: Latest 32-bit with Air-Assist automatic control
• الاتصال: USB, Bluetooth, SD Card (offline printing)
• البرامج المدعومة: LightBurn, LaserGRBL, Benbox, GrblController, LiteFire
• أنظمة التشغيل المدعومة: ويندوز، ماك
• مدعوم File التنسيقات: NC, BMP, JPG, PNG, DXF, etc.
• أبعاد المنتج: 18.11 × 18.11 × 6.69 بوصة
• وزن السلعة: 14.17 رطل
• الشركة المصنعة: سكالبفن
• بلد المنشأ: الصين
• تاريخ التوفر الأول: 9 يوليو 2024

الضمان والدعم

For warranty information and technical support, please refer to the official SCULPFUN webالموقع أو تواصل مع بائع التجزئة. احتفظ بإيصال الشراء كإثبات للشراء في حال وجود أي مطالبات بالضمان.

SCULPFUN Official Store: Visit the SCULPFUN Store on Amazon