1. المقدمة
This manual provides instructions for the installation, operation, and maintenance of the YSIDO RC Motor Cooling Fan Heatsink 3010. This product is designed to enhance the cooling performance of RC motors, specifically compatible with 1/10 and 1/8 scale RC cars, trucks, and boats using 3650, 540, 550, 4268, and 4274 size motors.
2. معلومات السلامة
- تأكد من حجم امدادات الطاقةtage is within the specified range of DC 5-8.4V.
- Incorrect polarity connection will not damage the fan due to reverse polarity protection, but ensure correct connection for operation.
- Keep fingers and loose objects away from the fan blades during operation.
- لا تحاول تفكيك المروحة أو تعديلها.
- This product is intended for use with RC motors only.
3. محتويات العبوة
تتضمن الحزمة العناصر التالية:
- 2 x YSIDO 3010 RC Motor Cooling Fans
4. المواصفات
| ميزة | مواصفة |
|---|---|
| نموذج | 3010 مروحة تبريد |
| كمية | 2 fans per pack |
| حجم الإدخالtage | العاصمة 5-8.4V |
| حاضِر | 0.18 أمبير |
| سرعة المروحة | 28000 RPM (for 30mm fan) |
| نوع الموصل | 2-pin Dupont male plug |
| طول الكابل | Approximately 17.5mm / 6.89 inches |
| Dimensions (each fan) | 30 مم × 30 مم × 10 مم (1.18 بوصة × 1.18 بوصة × 0.39 بوصة) |
| التوافق | HSP, HPI, Wltoys, Himoto, Tamiya, Redcat 1/10, 1/8 RC Car/Truck/Boat with 3650, 540, 550, 4268, 4274 motors |
Note: The fan features reverse polarity protection.
5. الإعداد والتثبيت
- تحديد موقع التركيب: Locate a suitable mounting point on your RC motor's heatsink or motor mount. The fan is designed to attach directly to compatible heatsinks.
- تأمين المروحة: Use appropriate screws (not included, typically provided with heatsink or motor mount) to securely fasten the cooling fan to the motor heatsink. Ensure the fan blades are unobstructed.
- توصيل الطاقة: The fan is powered via a 2-pin Dupont male plug. Connect this plug to an available port on your RC receiver or Electronic Speed Controller (ESC) that provides DC 5-8.4V output.
Image: The 2-pin Dupont connector features reverse polarity protection, preventing damage from incorrect connection. The cable length is approximately 17.5mm (6.89 inches). - تحقق من الاتصال: Double-check that the plug is fully inserted and the fan is securely mounted.
Image: A pair of YSIDO 3010 RC Motor Cooling Fans, showing their compact design and coiled power cables with 2-pin connectors.
Image: The YSIDO 3010 fan, illustrating its compact dimensions of 30mm x 30mm x 10mm (1.18in x 1.18in x 0.39in) and its small size relative to a human hand.
6. تعليمات التشغيل
Once installed and connected, the YSIDO RC Motor Cooling Fan will operate automatically when power is supplied to the receiver or ESC. The fan is designed for high-speed operation to efficiently dissipate heat from your RC motor.
- Ensure the fan blades are spinning freely and without obstruction during operation.
- Monitor motor temperatures to confirm effective cooling.
7. الصيانة
- تنظيف: Periodically inspect the fan blades and housing for dust, dirt, or debris accumulation. Use a soft brush or compressed air to gently clean the fan. Ensure the fan is disconnected from power before cleaning.
- تقتيش: Regularly check the power cable for any signs of wear, cuts, or damage. Ensure the fan remains securely mounted.
- تخزين: When not in use for extended periods, store the fan in a clean, dry environment away from direct sunlight and extreme temperatures.
8. استكشاف الأخطاء وإصلاحها
- المروحة لا تدور:
- Check if the power plug is securely connected to the receiver/ESC.
- Verify that the receiver/ESC is powered on and providing the correct voltage (DC 5-8.4V).
- Inspect the fan blades for any obstructions.
- افحص الكابل بحثًا عن أي ضرر واضح.
- انخفاض أداء التبريد:
- Clean any dust or debris from the fan blades and heatsink.
- Ensure the fan is mounted correctly and airflow is not restricted.
- Verify the fan is spinning at its rated speed.
9. الضمان والدعم
For warranty information or technical support, please refer to the product's original packaging or contact the manufacturer directly. Keep your purchase receipt for any warranty claims.
