HOBBYWING XRotor FPV 45A G2 ESC (4in1) 20x20 ESC Instruction Manual

1. المقدمة

This manual provides essential information for the proper installation, operation, and maintenance of your HOBBYWING XRotor FPV 45A G2 ESC (4in1) 20x20. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

The XRotor Micro 45A G2 4IN1 ESC is an advanced electronic speed controller designed for FPV racing applications. It integrates four 45A BLHeli 32-DShot1200 ESCs, offering real-time voltage and current monitoring. This new generation ESC features a 120MHz operating frequency, enhancing aircraft control, and utilizes large MOSFETs for extended durability. Its 32-bit microprocessors and BLHeli-32 firmware ensure high efficiency, reduced heat, quick response times, and extensive functionalities.

2. احتياطات السلامة

• افصل البطارية دائمًا قبل إجراء أي صيانة أو تركيب.
• Ensure correct polarity when connecting the battery to avoid damage to the ESC and other components.
• تجنب حدوث ماس كهربائي. تحقق جيداً من جميع التوصيلات قبل تشغيل الجهاز.
• أبقِ وحدة التحكم الإلكترونية بعيدة عن الماء والرطوبة ودرجات الحرارة القصوى.
• Ensure adequate ventilation around the ESC during operation to prevent overheating.
• This product is intended for experienced users. Improper use can lead to serious injury or damage.

3. محتويات العبوة

تأكد من وجود جميع العناصر في الحزمة الخاصة بك:

• 1x HOBBYWING XRotor FPV 45A G2 ESC (4in1)
• 1x XT60 Plug
• دليل التعليمات (هذا المستند)

4. مواصفات المنتج

• التصميم المتكامل: Four 45A BLHeli 32-DShot1200 ESCs in a compact 4-in-1 unit.
• الأداء العالي: 32-bit microprocessor with up to 120MHz operating frequency.
• متانة: Large MOSFETs manufactured in Japan for extended lifespan.
• كفاءة: 3-in-1 driver ICs and high-quality ceramic capacitors for reduced heat and quicker response.
• Advanced Firmware: Third-generation BLHeli-32 firmware supporting DShot1200.
• المراقبة في الوقت الحقيقي: المدمج في المجلدtagه والرصد الحالي.
• التشغيل السلس: Hardware-generated motor PWM for smooth throttle and quiet performance.
• Active Braking: Damped Light Mode for rapid motor deceleration and active freewheeling.
• الحجم الصغير: Ideal for FPVs with 130-280mm diagonal wheelbase.

5. المواصفات

6. الإعداد والتثبيت

6.1 التثبيت المادي

The XRotor FPV 45A G2 ESC is designed for a 20x20mm mounting pattern, suitable for compact FPV frames. Ensure proper insulation between the ESC and the carbon fiber frame to prevent short circuits.

الشكل 1: قمة view of the HOBBYWING XRotor FPV 45A G2 ESC (4in1). This image displays the main components, including the microprocessors and capacitors, along with the four blue damping rings for mounting.

الشكل 2: قاع view of the HOBBYWING XRotor FPV 45A G2 ESC (4in1). This image highlights the solder pads for connecting the motors (M1-M4) and the main power input, as well as the signal pads.

6.2 توصيلات الأسلاك

Carefully follow the wiring diagram provided with your flight controller. The ESC features solder tabs for motor output and designated pads for power input and signal connections.

• مدخلات الطاقة: Connect the Red 14AWG wire to the positive (+) terminal and the Black 14AWG wire to the negative (-) terminal. An XT60 plug is included for battery connection.
• مخرج المحرك: Solder your motor wires directly to the designated M1, M2, M3, M4 solder tabs on the ESC. Ensure correct motor rotation direction, which can be adjusted in the BLHeliSuite32 software.
• اتصال الإشارة: Connect the signal wires from your flight controller to the corresponding signal pads on the ESC. Refer to your flight controller's manual for specific pinouts.
• القياس عن بعد: The ESC supports real-time voltage and current monitoring. Connect the telemetry output to your flight controller if desired.

7. تعليمات التشغيل

7.1 البرامج الثابتة والتكوين

The XRotor FPV 45A G2 ESC comes pre-installed with BLHeli-32 firmware. This firmware offers extensive customization options and supports various digital protocols, including DShot1200.

• BLHeliSuite32 Software: Use the official BLHeliSuite32 software to configure ESC parameters, update firmware, and reverse motor direction. This software can be downloaded from the official BLHeli webموقع.
• DShot Protocol: Ensure your flight controller is configured to use DShot1200 or a lower DShot protocol for optimal performance and reliability.
• Damped Light Mode: This feature is enabled by default and provides active braking, allowing for quicker motor deceleration and improved flight characteristics.

7.2 المعايرة

Typically, DShot ESCs do not require throttle calibration. However, if you are using an analog protocol (e.g., PWM, OneShot), refer to your flight controller's manual for the throttle calibration procedure.

8. الصيانة

• Regularly inspect all solder joints and wire connections for signs of wear or damage.
• حافظ على وحدة التحكم الإلكترونية نظيفة وخالية من الغبار والأوساخ والشوائب. استخدم فرشاة ناعمة أو هواء مضغوط للتنظيف.
• Check for any physical damage to the ESC board or components.
• Ensure the ESC is adequately cooled during operation. Avoid obstructing airflow.

9. استكشاف الأخطاء وإصلاحها

• المحرك لا يدور:
  • Check all motor and signal connections.
  • Verify motor direction and settings in BLHeliSuite32.
  • Ensure the flight controller is sending correct signals.
• ارتفاع درجة حرارة وحدة التحكم الإلكترونية:
  • Ensure proper airflow and ventilation.
  • Check for short circuits or excessive current draw from motors.
  • Verify motor KV and propeller size are appropriate for the ESC's rating.
• Erratic Motor Behavior:
  • تحقق من وجود توصيلات فضفاضة أو أسلاك تالفة.
  • Ensure the latest BLHeli-32 firmware is installed.
  • Verify DShot protocol settings on the flight controller.

For further assistance, refer to the HOBBYWING official webالموقع أو الاتصال بالدعم الفني الخاص بهم.

10. الضمان والدعم

HOBBYWING products are manufactured to high-quality standards. This product is covered by a limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, firmware updates, or additional resources, please visit the official HOBBYWING webالموقع أو اتصل بالموزع المحلي لديك.

Note: Warranty may be voided by improper installation, unauthorized modifications, or misuse of the product.