دليل مستخدم VDIAGTOOL V200 Pro و VD30 Pro

1. انتهى المنتجview

The VDIAGTOOL V200 Pro and VD30 Pro are advanced automotive diagnostic tools designed to assist in identifying and resolving electrical and engine-related issues in vehicles. The V200 Pro is a versatile power circuit probe tester and breaker finder, while the VD30 Pro is a comprehensive OBD2 scanner.

Image 1.1: The VDIAGTOOL V200 Pro Automotive Power Circuit Probe Tester and VD30 Pro OBD2 Scanner Diagnostic Tool.

المميزات الرئيسية:

• V200 Pro: Comprehensive circuit testing including open circuits, tracing wires, AC/DC voltage, diode, resistance, polarity, continuity, ground, component activation, signal circuit, relay, fuse, and trailer light tests.
• VD30 Pro: Full OBD2 diagnostic capabilities including reading/clearing fault codes, live data graphing, freeze frame, I/M readiness, O2 sensor tests, and vehicle information.
• User-friendly interfaces for efficient operation.
• تصميم متين لأداء موثوق.

2. V200 Pro Automotive Power Circuit Probe Tester

2.1 المكونات والملحقات

The V200 Pro kit includes the main circuit probe tester unit and a comprehensive set of accessories for various testing scenarios.

Image 2.1: The VDIAGTOOL V200 Pro kit, including the circuit probe, breaker finder, and various connectors.

• V200 Pro Circuit Tester Unit
• 30 PCS Back Probe Kit: Includes 15 back probe pins, 5 banana plug to alligator clip circuit test wires, 5 wire piercing probes, and 5 nickel-plated copper alligator clips.
• Extension Cables (20FT + 20FT)

2.2 Functions and Capabilities

The V200 Pro is designed for a wide range of electrical diagnostic tasks:

الصورة 2.2: انتهىview of the V200 Pro's multifunctional automotive circuit testing capabilities.

• Circuit Open Test
• تتبع الأسلاك
• AC / DC Voltagالاختبار الإلكتروني
• اختبار الصمام الثنائي
• اختبار المقاومة
• اختبار القطبية
• اختبار الاستمرارية
• Ground Test
• Activate Components
• Signal Circuit Test
• Relay, Fuse, Trailer Light Test

It effectively locates short circuits, broken wires, and helps trace electrical paths within the vehicle's system.

Image 2.3: The V200 Pro power probe circuit tester effectively diagnosing electrical problems.

3. VD30 Pro OBD2 Scanner Diagnostic Tool

3.1 Functions and Capabilities

The VD30 Pro is designed to provide comprehensive diagnostic information for OBD2 compliant vehicles, helping users understand and resolve engine-related issues.

Image 3.1: The VD30 Pro's powerful OBD2 scanner diagnostic tool interface and key features.

• Turn off Check Engine Light (CEL)
• Read/Clear Fault Codes (DTCs)
• Live Data (4-In-1 Graphing)
• تجميد بيانات الإطار
• One-Click I/M Readiness (Smog Check)
• On-Board Monitor Test (Mode 06)
• اختبار المكون
• اختبار حساس الأكسجين
• Vehicle Information (VIN, CIN, CVN)
• الوحدة الحالية
• المجلدtagالاختبار الإلكتروني
• DTC Lookup Library
• Data Playback & Printing

Image 3.2: The VD30 Pro's capability to clear fault codes and turn off the Check Engine Light (MIL).

4. الإعداد

4.1 V200 Pro Setup

1. توصيل الطاقة: Connect the V200 Pro to the vehicle's 12V or 24V battery using the provided alligator clips or cigarette lighter adapter. Ensure correct polarity (red to positive, black to negative).
2. تفعيل الأداة: سيتم تشغيل الجهاز تلقائيًا بمجرد توصيله.
3. ملحق الملحق: Attach the appropriate back probe pins, test wires, or piercing probes to the V200 Pro's main probe for specific testing needs.

4.2 VD30 Pro Setup

1. تحديد موقع منفذ OBD2: حدد منفذ التشخيص OBD2 ذو 16 سنًا في سيارتك، والذي يوجد عادةً أسفل لوحة القيادة على جانب السائق.
2. توصيل الماسح الضوئي: Plug the VD30 Pro's OBD2 cable into the vehicle's OBD2 port.
3. تشغيل الطاقة: The scanner will power on automatically from the vehicle's electrical system.
4. تهيئة النظام: The scanner will perform a system initialization and attempt to link to the vehicle's ECU. Follow on-screen prompts.

5. تعليمات التشغيل

5.1 V200 Pro Operation

1. اختيار الوضع: Use the navigation buttons on the V200 Pro to select the desired test mode (e.g., Voltage Test, Continuity Test, Component Activation).
2. Performing Tests:
• المجلدtagالاختبار الإلكتروني: Touch the probe tip to the circuit point. The display will show the voltagالقراءة الإلكترونية.
• اختبار الاستمرارية: Connect the probe to one end of the circuit and the ground clip to the other. An audible tone and display indication confirm continuity.
• تفعيل المكون: Select the activation mode, then touch the probe to the component's power input. Use the power switch on the V200 Pro to apply positive or negative voltage.
• Tracing Wires/Breaker Finding: Utilize the breaker finder unit in conjunction with the probe to locate breaks or shorts in wiring.
3. تفسير النتائج: Observe the display for numerical readings, polarity indicators (red/green LED), and audible alerts.

5.2 VD30 Pro Operation

1. القائمة الرئيسية: Once connected and linked, navigate the main menu using the directional buttons.
2. قراءة الرموز: Select "Read DTC" to retrieve current, pending, and permanent diagnostic trouble codes.
3. مسح الرموز: After addressing the issue, select "Clear DTC" to erase codes and turn off the Check Engine Light. Note: Ensure the underlying problem is fixed before clearing codes to prevent recurrence.
4. البيانات الحية: Choose "Live Data" to view real-time sensor data. Use the graphing function for visual analysis of parameters.
5. أنا / م الاستعداد: Select "I/M Readiness" to check the status of emission-related monitors, useful for smog checks.
6. بحث DTC: Use the built-in DTC Lookup function to get detailed descriptions of retrieved fault codes.

6. الصيانة

• تنظيف: Wipe the tools with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the tools are dry before storage.
• تخزين: Store the V200 Pro and VD30 Pro in their original case or a protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
• العناية بالكابلات: Avoid sharp bends or kinks in the cables. Store them neatly coiled to prevent damage.
• التحقيق غيض: Keep the V200 Pro's probe tip clean and free of debris for accurate readings.

7. استكشاف الأخطاء وإصلاحها

7.1 V200 Pro Troubleshooting

• لا يوجد طاقة: Ensure the power clips are securely connected to the vehicle battery terminals with correct polarity. Check the vehicle's battery voltage.
• قراءات غير دقيقة: Verify the probe tip is making good contact with the circuit. Ensure the ground clip has a solid connection to a clean metal ground point on the vehicle chassis.
• لا يوجد مؤشر استمرارية: Check if the circuit is truly continuous. Ensure connections are secure.

7.2 VD30 Pro Troubleshooting

• Link Error/No Communication:
• Verify the OBD2 cable is firmly connected to both the scanner and the vehicle's OBD2 port.
• تأكد من أن مفتاح تشغيل السيارة في وضع التشغيل (المحرك مطفأ أو يعمل، حسب الاختبار).
• تحقق من مستوى شحن بطارية السيارةtagهـ؛ صوت منخفضtagبإمكانها منع التواصل.
• Try the scanner on another OBD2 compliant vehicle to rule out scanner malfunction.
• Cannot Clear Codes: Codes cannot be cleared if the underlying fault is still present. Address the issue first, then attempt to clear codes.
• تجمد الشاشة: Disconnect the scanner from the vehicle, restart it, and reconnect.

8. المواصفات

9. الضمان والدعم

VDIAGTOOL offers comprehensive support for its products:

• ضمان: 1 Year Warranty from the date of purchase.
• الدعم الفني: 24/7 Lifetime technical support is available.
• الإرجاعات/الاسترداد: 60 Days No-Question-Asked NEW REPLACEMENT OR REFUND policy.

For any questions or concerns, please reach out to VDIAGTOOL customer support via email: vdiagtool2@outlook.com.