Vortex Optics Defender-XL Micro Red Dot Sights User Manual

مقدمة

The Vortex Optics Defender-XL Micro Red Dot Sight is engineered for precision and durability, designed to enhance target acquisition and accuracy. Built with an ultra-wide sight window, it provides an expansive field of view, crucial for quick target engagement and flexible shooting positions. This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Defender-XL red dot sight.

الشكل 1: الجبهة view of the Vortex Optics Defender-XL Micro Red Dot Sight.

ما هو المشمول

Your Defender-XL Micro Red Dot Sight package includes the following components:

• النقطة الحمراء البصر
• لوحة محول Glock MOS
• حامل سكة بيكاتيني
• الغطاء المطاطي
• عدسة القماش
• بطارية CR2032
• أداة
• أكثر مجموعات براغي التثبيت شيوعًا

Figure 2: All components included in the Defender-XL Micro Red Dot Sight package.

الميزات الرئيسية

The Defender-XL is equipped with advanced features to optimize your shooting experience:

• Ultra-Wide Sight Window: Designed for competition, this expansive window enhances field of view, enabling quicker target acquisition and faster, more accurate follow-up shots.
• بصمة دلتا بوينت برو: Ensures compatibility with a wide range of firearms and mounting solutions.
• إعدادات السطوع القابلة للتعديل: Features 12 brightness settings, including 10 for daylight use and two for night-vision compatibility, allowing adaptation to various lighting conditions.
• تفعيل الحركة مع خاصية الإيقاف التلقائي: The red dot automatically turns off after 10 minutes of inactivity to conserve battery life. It instantly reactivates upon detecting motion.
• بطارية مثبتة في الأعلى: Powered by a CR2032 battery, conveniently accessible from the top for easy replacement without dismounting the sight.
• عمر بطارية ممتد: Provides approximately 25,000 hours of continuous operation at setting 6.
• واجهة أمامية محكمة وسريعة التركيب: Adds grip, facilitating slide racking off any surface for enhanced tactical utility.
• حشوة بوليمرية واقية من الصدمات: Provides robust protection against impacts and hard use, ensuring durability.
• بناء متين: Waterproof and shockproof design, complemented by an ArmorTek coating on the lens for scratch resistance and protection against dirt and oil.

Figure 3: Key components and features of the Defender-XL, including Fast-Rack Textured Grip, Battery Compartment Set Screw, ShockShield Polymer Insert, Battery Cap, Up/Down Buttons, Elevation Turret, and Windage Turret.

الإعداد والتثبيت

1. تركيب البطارية

The Defender-XL uses one CR2032 battery. To install or replace the battery:

1. Locate the battery cap on the top of the sight.
2. Use the included tool or a coin to unscrew the battery cap counter-clockwise.
3. قم بإدخال بطارية CR2032 مع توجيه الجانب الموجب (+) لأعلى.
4. Replace the battery cap and screw it clockwise until snug. Do not overtighten.

2. تركيب المنظار

The Defender-XL is designed with a DeltaPoint Pro footprint. Use the appropriate mounting plate and screws for your specific firearm. Common mounting screw sets are included.

1. تأكد من أن سلاحك الناري غير مُلقّم وآمن.
2. Select the correct mounting plate (e.g., Glock MOS Adapter Plate, Picatinny Rail Mount) and screw set for your firearm.
3. Align the Defender-XL with the mounting plate/footprint on your firearm.
4. Secure the sight using the provided screws. Apply thread locker if recommended by your firearm manufacturer. Tighten screws to the recommended torque specifications (refer to your firearm's manual or mounting plate instructions).

الشكل 4: الجانب view of the Defender-XL, highlighting the mounting screw locations and the DeltaPoint Pro footprint.

عملية

تشغيل/إيقاف التشغيل وضبط السطوع

The Defender-XL features intuitive controls for power and brightness:

• To turn on the sight, press either the Up or تحت زر تعديل السطوع.
• To increase brightness, press the Up زر (▲).
• To decrease brightness, press the تحت زر (▼).
• To turn off the sight, press and hold the تحت button for approximately 3 seconds until the dot extinguishes.

Motion Activation and Auto-Shutoff

The Defender-XL is equipped with motion activation to conserve battery life. If the sight detects no motion for 10 minutes, it will automatically shut off. The dot will instantly reactivate to the last used brightness setting when motion is detected again.

Button Lockout Mode

To prevent unintentional changes to brightness settings, the Defender-XL features a button lockout mode:

• To activate lockout mode, press and hold both the Up و تحت buttons simultaneously for 3 seconds. The dot will flash once to confirm activation.
• In lockout mode, the brightness buttons are disabled. The dot will remain at its current brightness.
• To deactivate lockout mode, press and hold both the Up و تحت buttons simultaneously for 3 seconds. The dot will flash twice to confirm deactivation.

تعديل الرياح والارتفاع

Adjustments for windage and elevation are made using the turrets on the sight. Each click adjusts the point of impact by 1 MOA.

• برج الارتفاع: Located on the top of the sight. Turn clockwise to move the point of impact down, counter-clockwise to move it up.
• برج تعديل الانحراف الجانبي: Located on the right side of the sight. Turn clockwise to move the point of impact right, counter-clockwise to move it left.

الشكل 5: خلفي view of the Defender-XL, showing the large sight window and controls.

صيانة

تنظيف العدسات

Proper cleaning of the lenses ensures optimal performance. The ArmorTek coating helps repel dirt and oil, but regular cleaning is recommended.

1. Use the included lens cloth or a soft, lint-free cloth.
2. Gently brush away any loose dust or debris from the lens surfaces.
3. If necessary, use a small amount of lens cleaning solution applied to the cloth (not directly to the lens) to remove smudges or fingerprints.
4. Wipe the lenses in a circular motion, starting from the center and moving outwards.
5. Avoid using harsh chemicals, abrasive cloths, or excessive pressure, as this can damage the lens coatings.

الرعاية العامة

• Store the sight in a dry, cool place when not in use.
• Use the rubber cover to protect the sight from dust and scratches during storage or transport.
• Periodically check all mounting screws to ensure they are securely tightened.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your Defender-XL Micro Red Dot Sight, please refer to the following common problems and solutions:

If the issue persists after attempting these solutions, please contact Vortex Optics customer support for further assistance.

تحديد

الضمان والدعم

Vortex VIP Warranty

The Vortex Optics Defender-XL Micro Red Dot Sight is backed by the Vortex VIP Warranty. This is an unlimited, unconditional, lifetime warranty. Vortex will repair or replace your product absolutely free, no matter the cause. This warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder the performance of the product.

Figure 6: Vortex VIP Warranty details.

دعم العملاء

For further assistance, technical support, or warranty claims, please visit the official Vortex Optics webالموقع أو تواصل مع خدمة العملاء. يمكنك أيضًا زيارة Vortex Store on Amazon لمزيد من المعلومات والمنتجات.