1. المقدمة
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MONTECH HyperFlow ARGB 360 AIO CPU Liquid Cooler. Designed for optimal thermal performance, this cooler features an enhanced 3100RPM water pump and three Metal Pro 12 ARGB cooling fans, ensuring efficient heat dissipation for Intel and AMD compatible systems.
2. مواصفات المنتج
- Industry-leading 6-year warranty period for peace of mind.
- Gemstone design water pump with a rapid 3100RPM speed for efficient heat dissipation.
- Metal Pro 12 ARGB 28mm Fans operating at 2200 RPM for robust airflow pressure.
- Slim 27mm radiator with a single-row 20FPI fin design for powerful and efficient cooling.
- Flexible compatibility with Intel LGA 1700/1200/15X/2066 and AMD AM3/AM4/AM5 motherboard platforms.
- Simplified cable management with a pre-connected 7-pin short cable, compatible with 4-pin and 5V3pin connectors.
- Pre-installed fans and pre-applied thermal paste for quick setup.
3. محتويات العبوة
تأكد من وجود كافة المكونات قبل البدء في التثبيت:
- MONTECH HyperFlow ARGB 360 AIO Unit (Radiator, Pump, and Fans pre-assembled)
- Mounting Hardware for Intel LGA 1700/1200/15X/2066 sockets
- Mounting Hardware for AMD AM3/AM4/AM5 sockets
- Thermal Paste (pre-applied on cold plate)
- Thermal Paste Stencil (for reapplication)
- دليل المستخدم
4. الإعداد والتثبيت
Follow these steps for proper installation of your HyperFlow ARGB 360 AIO cooler. Ensure your system is powered off and unplugged before proceeding.
4.1 فحص التثبيت المسبق
The fans are pre-installed on the radiator, and thermal paste is pre-applied to the cold plate. This simplifies the installation process significantly.
4.2 Mounting the Radiator and Fans
Mount the radiator and fans to an available 360mm mounting location in your PC case (e.g., top, front). Ensure proper airflow direction for optimal cooling.
4.3 Installing the Water Block
Select the appropriate mounting bracket for your CPU socket (Intel LGA 1700/1200/15X/2066 or AMD AM3/AM4/AM5). Secure the water block to your CPU according to the specific instructions for your motherboard and socket type. Ensure even pressure for proper thermal contact.
4.4 اتصالات الكابلات
The cooler features a pre-connected 7-pin short cable for simplified wiring. Connect the 4-pin PWM connector to your motherboard's CPU_FAN header and the 5V3pin ARGB connector to a compatible ARGB header on your motherboard for lighting control.
5. تعليمات التشغيل
Once installed, the MONTECH HyperFlow ARGB 360 operates automatically, regulating pump and fan speeds based on CPU temperature. Ensure your motherboard's BIOS/UEFI settings are configured to allow PWM control for the CPU fan header.
5.1 Fan and Pump Operation
- مضخة المياه: Operates at a maximum rotational speed of 3100 RPM, ensuring rapid coolant circulation.
- مراوح التبريد: Metal Pro 12 ARGB fans operate up to 2200 RPM, providing robust airflow.
- مستوى الضوضاء: The cooler is designed for quiet operation, with a typical noise level of 28 dB.
5.2 التحكم في إضاءة ARGB
The ARGB lighting can be controlled via your motherboard's RGB software (if compatible with 5V3pin ARGB headers) or a dedicated ARGB controller (not included).
6. الصيانة
تضمن الصيانة الدورية الأداء الأمثل وطول عمر مبرد نظام التبريد المتكامل (AIO).
- إزالة الغبار: نظّف الغبار من زعانف المبرد وشفرات المروحة بشكل دوري باستخدام الهواء المضغوط أو فرشاة ناعمة. تأكد من توقف المراوح عن الدوران أثناء التنظيف.
- المعجون الحراري: The pre-applied thermal paste is designed for long-term use. If you need to remove and re-install the water block, clean off old thermal paste and apply new paste using the provided stencil for even coverage.
- فحص الأنابيب: Occasionally inspect the tubing for any signs of kinks, leaks, or damage.
7. استكشاف الأخطاء وإصلاحها
إذا واجهت مشاكل مع جهاز التبريد الخاص بك، فارجع إلى خطوات استكشاف الأخطاء وإصلاحها الشائعة التالية:
- درجات حرارة وحدة المعالجة المركزية العالية:
- Ensure the water block is securely mounted and making good contact with the CPU.
- Verify that the pump is running (you may feel a slight vibration or hear a faint hum). Check pump power connection.
- Confirm fans are spinning and airflow is unobstructed.
- Check thermal paste application. Reapply if necessary.
- Fans Not Spinning/ARGB Not Lighting:
- Check all power and ARGB cable connections to the motherboard.
- Ensure appropriate headers are enabled in BIOS/UEFI.
- Test fans/ARGB with different headers or a known working setup if possible.
- ضوضاء غير عادية:
- A gurgling sound immediately after installation may indicate air bubbles. This usually resolves itself over time.
- تأكد من عدم وجود كابلات تعيق شفرات المروحة.
8. المواصفات
| ميزة | مواصفة |
|---|---|
| رقم الموديل | HyperFlow ARGB 360 Black |
| أبعاد المنتج | 15.63 بوصة طول × 4.72 بوصة عرض × 1.06 بوصة ارتفاع (39.7 × 12 × 2.7 سم) |
| وزن | 4.23 رطل (1.92 كجم) |
| طريقة التبريد | تبريد المياه |
| سرعة المضخة | الحد الأقصى 3100 دورة في الدقيقة |
| سرعة المروحة | Max 2200 RPM (Metal Pro 12 ARGB) |
| مستوى الضوضاء | 28 ديسيبل (بشكل نموذجي) |
| نوع موصل الطاقة | 4-Pin (PWM) |
| ARGB Connector Type | 5V3pin |
| المجلدtage | 5 فولت |
| واتtage | 14.28 واط |
| الأجهزة المتوافقة | كمبيوتر الألعاب |
| توافق مقبس وحدة المعالجة المركزية | Intel LGA 1700/1200/15X/2066, AMD AM3/AM4/AM5 |
| مادة المبرد | Aluminum (with 20 FPI fin design) |
9. الضمان والدعم
MONTECH provides an industry-leading ضمان لمدة 6 سنوات for the HyperFlow ARGB 360 AIO CPU Liquid Cooler. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact MONTECH customer service through their official webالموقع أو بائع التجزئة الذي تم شراء المنتج منه.
