tectake Arges Ergonomic Office Chair with Lumbar Support (Model 405323)

مقدمة

Thank you for choosing the tectake Arges Ergonomic Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

The tectake Arges office chair is designed to provide optimal seating comfort and support, helping to alleviate back issues during long periods of sitting. Its features include a height and angle-adjustable headrest, comfortable reclinable armrests, continuous height adjustment, breathable mesh fabric, and a height-adjustable lumbar support with adjustable tilt resistance.

تعليمات السلامة

• تأكد من وجود جميع المكونات وسلامتها قبل التجميع. لا تستخدم المنتج إذا كانت أي من الأجزاء مفقودة أو تالفة.
• قم بتجميع الكرسي على سطح ناعم ونظيف لمنع الخدوش.
• لا تقف على الكرسي.
• لا تستخدم الكرسي كدرجة.
• Keep children away from the chair during assembly. Small parts can be a choking hazard.
• The maximum load capacity for this chair is 120 kg (264 lbs). Do not exceed this weight limit.
• Regularly check all screws and connections to ensure they are tight. Retighten if necessary.
• تجنب تعريض الكرسي لأشعة الشمس المباشرة أو درجات الحرارة القصوى لفترات طويلة.

الإعداد والتجميع

Follow these steps to assemble your tectake Arges office chair. It is recommended to have two people for assembly.

1. فك مكونات الحزمة: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts are present against the included parts list (refer to your product packaging for the complete list).
2. ربط العجلات بالقاعدة: أدخل العجلات الخمس في الفتحات الموجودة في نهاية كل ساق من قاعدة الكرسي. ادفعها بقوة حتى تُصدر صوت طقطقة.
3. إدراج رفع الغاز: قم بوضع أسطوانة رفع الغاز في الفتحة المركزية لقاعدة الكرسي.
4. تجميع المقعد ومسند الظهر: Attach the backrest to the seat using the provided screws and tools. Ensure the orientation is correct.
5. إرفاق مساند للذراعين: Secure the armrests to the seat and backrest assembly using the designated screws.
6. Mount Mechanism: Attach the control mechanism to the underside of the seat using the appropriate screws. Ensure the lever is facing the front or right side for easy access.
7. ربط المقعد برافعة الغاز: قم بوضع المقعد المجمع بعناية على أسطوانة رفع الغاز، مع التأكد من أنه متمركز ومستقر.
8. تثبيت مسند الرأس: Slide the headrest into the designated slots at the top of the backrest and secure it.

After assembly, sit on the chair to ensure all components are securely connected and stable.

تعليمات التشغيل والتعديلات

Your tectake Arges office chair offers several adjustment options to customize your seating experience for optimal comfort and ergonomic support.

تعديل ارتفاع الكرسي

To adjust the seat height (approx. 45-55 cm):

• لرفع: Lift the lever located under the seat on the right side while taking your weight off the seat. The seat will rise automatically.
• لخفض: Lift the lever while seated. The seat will lower under your weight. Release the lever at the desired height.

Backrest Tilt Function

The chair features a tilt function with adjustable resistance.

• To activate/deactivate tilt: Pull out or push in the lever located under the seat (often the same lever as height adjustment, or a separate one).
• To adjust tilt resistance: Turn the round knob located under the front of the seat. Turn clockwise to increase resistance (making it harder to tilt) and counter-clockwise to decrease resistance (making it easier to tilt).

دعم قطني قابل للتعديل

The lumbar support is height-adjustable to provide targeted support for your lower back.

• Grasp the lumbar support pad on the backrest and slide it up or down to your preferred position.

Image: Close-up of the adjustable lumbar support mechanism on the chair's backrest.

مسند رأس قابل للتعديل

The headrest can be adjusted in both height and angle.

• ضبط الارتفاع: Gently pull the headrest up or push it down to adjust its height.
• ضبط الزاوية: Tilt the headrest forward or backward to find the most comfortable angle for your neck and head.

Image: Close-up of the adjustable headrest, showing its height and angle adjustment capabilities.

Reclinable Armrests

The armrests can be tilted backward to allow the chair to be pushed closer to a desk or for easier movement.

• Simply lift the armrests upwards to recline them. Push them back down to their original position.

الصيانة والعناية

Proper maintenance will extend the life of your tectake office chair.

• تنظيف: تنظيف الكرسي باستخدام الإعلانamp cloth. For stubborn stains, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners.
• العناية بالقماش: The breathable mesh fabric and padded seat can be gently wiped. Do not saturate with water.
• العناية بالإطار: Wipe metal and plastic parts with a damp قطعة قماش.
• صيانة العجلات: Periodically check casters for hair or debris and clean them to ensure smooth movement.
• فحص المثبتات: Regularly inspect all screws and bolts to ensure they are tight. Retighten as needed to maintain stability and safety.
• تخزين: إذا كنت ستخزن الكرسي لفترة طويلة، فاحفظه في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة.

استكشاف الأخطاء وإصلاحها

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact tectake customer support for assistance.

تحديد

Image: Detailed dimensions of the tectake Arges office chair.

الضمان والدعم

For warranty information or technical support, please refer to the purchase documentation or contact tectake customer service directly. Contact details can typically be found on the manufacturer's webالموقع أو إيصال الشراء الخاص بك.

الشركة المصنعة: تكتيك

بائع: tectake nederland

سياسة العائدات: 30 يوما