Leomru 15x15 8-in-1 Heat Press Machine Instruction Manual

1. المقدمة

The Leomru 15x15 8-in-1 Heat Press Machine is a versatile heat transfer solution designed for applying designs to various items. This multifunction combo unit features a 15"x15" T-shirt press, a 5.5"x3" hat press, multiple mug press attachments (6oz, 11oz, 12oz, 17oz), and two plate press attachments (5" and 6"). Its dual-tube heating system ensures even heat distribution, while the 360-degree swing-away and slide-out design enhance safety and ease of use. The upgraded digital control box allows for precise temperature and time settings, making it suitable for a wide range of heat transfer projects.

2. معلومات السلامة

تحذير: قد يؤدي عدم اتباع تعليمات السلامة هذه إلى نشوب حريق أو صدمة كهربائية أو إصابة أو ضرر آخر.

• قم دائمًا بتشغيل مكبس الحرارة على سطح ثابت ومقاوم للحرارة.
• Keep hands and body clear of the heating element during operation to prevent burns. The heating plate reaches high temperatures.
• تأكد من تأريض الجهاز بشكل صحيح لمنع حدوث صدمة كهربائية.
• لا تترك الجهاز دون مراقبة أثناء تشغيله أو استخدامه.
• افصل الجهاز عن مأخذ الطاقة عندما لا يكون قيد الاستخدام أو قبل التنظيف والصيانة.
• Keep children and pets away from the heat press machine.
• Use appropriate personal protective equipment, such as heat-resistant gloves, when handling hot items or components.
• Do not apply excessive force when closing the heat press, as this may damage the machine or the item being pressed.
• Ensure adequate ventilation in the work area to dissipate any fumes from heat transfer materials.
• Do not use the machine if the power cord or plug is damaged. Contact customer support for assistance.
• The machine features an automatic shut-off function in case of overheating. If this occurs, unplug the machine and allow it to cool before attempting to use it again.

3. مكونات المنتج

The Leomru 8-in-1 Heat Press Machine includes the main unit and various interchangeable attachments for different applications.

Figure 1: Main Heat Press Unit and Included Attachments

ميزات الوحدة الرئيسية:

• Heating Plate (15"x15"): The primary flat platen for T-shirts and other flat items. Features a Teflon coating to prevent sticking.
• Bottom Plate/Slide-out Tray: The lower platen where items are placed. Designed to slide out for easier and safer placement of materials.
• صندوق التحكم: Digital display for temperature and time settings, with buttons for adjustment and mode selection. Includes overheat protection.
• مقبض تعديل الضغط: Located at the top, allows for fine-tuning pressure based on material thickness.
• ذراع التأرجح: Allows the heating plate to rotate 360 degrees, moving it away from the working area for safety and convenience.
• مقابض: Ergonomic handles for operating the press and sliding the tray.

المرفقات المضمنة:

• T-shirt Press (15"x15"): Integrated into the main unit for flat items.
• Hat Press (5.5"x3"): For pressing designs onto caps and hats.
• Mug Press Attachments: Four different sizes for various mug capacities (6oz, 11oz, 12oz, 17oz).
• ملحقات مكبس اللوحة: Two sizes for ceramic plates (5" and 6").
• Teflon Sheets: Two sheets provided for extra protection of vinyl and garments.

الشكل 2: انتهىview of 8 Interchangeable Accessories

4. الإعداد

الإعداد الأولي:

1. Unpack all components from the box and ensure all parts are present.
2. Place the main heat press unit on a sturdy, flat, and heat-resistant surface.
3. Ensure the power switch is in the "OFF" position before plugging the machine into a standard 110V power outlet.

ملحقات التثبيت:

The heat press is designed for easy interchangeability of attachments. For mug and plate presses, you will need to disconnect the main control box from the stand and connect it to the specific attachment. For the hat press, you will replace the top heating plate with the hat press attachment.

For Mug Press Attachments:

1. Disconnect the control box from the main heat press stand.
2. Connect the cable of the desired mug press attachment to the control box.
3. Place the mug press on a stable surface.

For Plate Press Attachments:

1. Loosen the screws on the main heating plate to remove it.
2. Install the plate press attachment onto the top part of the machine by fastening the screws.
3. Connect the cable of the plate press to the control box.

For Hat Press Attachment:

1. Remove the screws from the main heating plate and install the hat press attachment in its place.
2. Remove the nuts from the bottom table and fasten the bottom part of the hat press with them.
3. Connect the cable of the hat press to the control box.

5. تعليمات التشغيل

التشغيل العام:

1. تشغيل الطاقة: Flip the power switch to the "ON" position. The digital display will light up.
2. ضبط درجة الحرارة: Press the "SET" button on the control box. Use the "+" and "-" buttons to adjust the desired temperature (range: 30-450 °F). Press "SET" again to confirm.
3. ضبط الوقت: After setting the temperature, press "SET" again to enter time setting mode. Use the "+" and "-" buttons to adjust the desired time (range: 0-999 seconds). Press "SET" to confirm.
4. التسخين المسبق: Allow the machine to pre-heat until it reaches the set temperature. The display will indicate when the target temperature is reached.
5. ضبط الضغط: Use the pressure adjustment knob at the top to set the appropriate pressure for your material. Turn clockwise for more pressure, counter-clockwise for less. The pressure should be firm but not overly tight.

Figure 3: Digital Control Panel and Pressure Adjustment

T-shirt Press Operation:

1. Prepare T-shirt: Place the T-shirt onto the bottom plate. Use the slide-out tray for easier positioning.
2. Pre-heat T-shirt: Close the heat press for 5-10 seconds to remove moisture and wrinkles. Open the press and allow the T-shirt to cool slightly.
3. Position Design: Place your transfer paper or vinyl design onto the T-shirt. Cover with a Teflon sheet.
4. يضعط: Swing the heating plate over the T-shirt and press the handle down firmly. The timer will start automatically.
5. ينهي: Once the timer beeps, release the handle, swing the heating plate away, and carefully remove the T-shirt.

Mug Press Operation:

1. Prepare Mug: Wrap your sublimation transfer paper around the mug and secure it with heat-resistant tape.
2. Insert Mug: Place the prepared mug into the mug press attachment.
3. يضعط: Close the mug press handle to apply pressure. The timer will start.
4. ينهي: Once the timer beeps, open the press and carefully remove the hot mug. Allow it to cool before handling.

Hat Press Operation:

1. Prepare Hat: Place the hat onto the hat press platen, ensuring it is centered and flat.
2. Position Design: Place your transfer design onto the hat and secure it if necessary.
3. يضعط: Lower the heating element onto the hat and apply pressure. The timer will start.
4. ينهي: After the timer beeps, lift the heating element and carefully remove the hat.

Plate Press Operation:

1. Prepare Plate: Place your transfer design onto the ceramic plate and secure it.
2. لوحة الموضع: Place the prepared plate onto the plate press platen.
3. يضعط: Lower the heating element onto the plate and apply pressure. The timer will start.
4. ينهي: Once the timer beeps, lift the heating element and carefully remove the hot plate.

6. الصيانة

• تنظيف: Regularly wipe down the heating plates and exterior surfaces with a soft, damp cloth when the machine is cool and unplugged. Do not use abrasive cleaners.
• Teflon Sheets: Replace Teflon sheets if they become worn, torn, or excessively dirty to ensure optimal heat transfer and protection.
• تخزين: Store the heat press in a dry, dust-free environment when not in use. Keep attachments organized and protected.
• تقتيش: Periodically inspect the power cord, plug, and all connections for any signs of damage. Do not operate if damage is found.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات