Sylvania A19 LED Light Bulbs Instruction Manual

1. المقدمة

Thank you for choosing Sylvania A19 LED Light Bulbs. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.

2. انتهى المنتجview

This package includes a combination of Sylvania A19 LED light bulbs designed to replace traditional incandescent bulbs. You will find both 40W equivalent (6W, 450 lumens) and 60W equivalent (8.5W, 800 lumens) bulbs, all featuring a soft white (2700K) color temperature and a standard medium (E26) base.

Image 1: Sylvania A19 LED Light Bulbs, showing both 40W and 60W equivalent bulbs in their packaging.

These energy-efficient bulbs offer instant illumination, long lifespan, and are free from UV/IR emissions, mercury, and lead.

3. معلومات السلامة

• خطر الصدمة الكهربائية: قم دائمًا بفصل التيار الكهربائي عن الجهاز قبل فحص المصباح أو تركيبه أو إزالته.
• للاستخدام الداخلي فقط: These bulbs are designed for indoor use in dry locations. Do not use in wet or damp البيئات ما لم يتم تصنيف التركيبات خصيصًا لمثل هذه الظروف.
• Not for Enclosed Fixtures: Avoid using these bulbs in fully enclosed fixtures, as this can shorten their lifespan due to heat buildup.
• غير قابلة للتعتيم: These bulbs are non-dimmable. Do not use with dimmer switches, as this may cause damage to the bulb or dimmer.
• درجة حرارة التشغيل: Suitable for operation in temperatures between -20°C and +40°C (-4°F and +104°F).
• وزن: Do not use in fixtures where the bulb's weight might exceed the fixture's capacity.

4. الإعداد والتثبيت

Installation of Sylvania A19 LED light bulbs is straightforward. Follow these steps:

1. إيقاف تشغيل الطاقة: حدد موقع مفتاح الإضاءة أو قاطع الدائرة الذي يتحكم في جهاز الإضاءة، ثم افصل التيار الكهربائي تمامًا.
2. إزالة المصباح القديم: قم بفك المصباح الكهربائي الموجود من مكانه بحرص. اتركه ليبرد إذا كان قد تم استخدامه مؤخراً.
3. أدخل مصباح LED جديد: Gently screw the Sylvania A19 LED bulb into the socket until it is snug. Do not overtighten.
4. اعادة الطاقة: قم بإعادة تشغيل الطاقة من المفتاح أو قاطع الدائرة.
5. امتحان: قم بتشغيل مفتاح الإضاءة للتأكد من إضاءة المصباح بشكل صحيح.

Image 2: A set of four Sylvania A19 LED light bulbs, ready for installation.

5. تعليمات التشغيل

Sylvania A19 LED light bulbs operate like traditional bulbs. Once installed, simply use the wall switch or fixture switch to turn the light on or off. These bulbs provide instant full brightness with no warm-up time.

6. الصيانة

These LED bulbs require minimal maintenance due to their long lifespan of up to 11,000 hours.

• تنظيف: لتنظيف المصباح، تأكد من فصل التيار الكهربائي عنه وبرودته. امسحه برفق بقطعة قماش ناعمة وجافة. لا تستخدم المنظفات السائلة أو المواد الكاشطة.
• الاستبدال: When the bulb reaches the end of its life, follow the installation steps in Section 4 to replace it with a new Sylvania A19 LED bulb. Dispose of old bulbs according to local regulations.

7. استكشاف الأخطاء وإصلاحها

If your Sylvania A19 LED bulb does not light up after installation, consider the following:

• لا يوجد طاقة: Check if the light switch is in the 'ON' position. Verify that the circuit breaker for the fixture has not tripped.
• اتصال فضفاض: Turn off the power, then carefully re-screw the bulb into the socket to ensure a secure connection.
• Incorrect Fixture: Ensure the fixture is compatible with A19 bulbs and has a medium (E26) base.
• تبديل باهتة: Confirm that the fixture is not connected to a dimmer switch, as these non-dimmable bulbs are not compatible.
• Damaged Bulb: If the above steps do not resolve the issue, the bulb may be faulty. Replace it with a new one.

8. المواصفات

9. الضمان والدعم

For warranty information or technical support, please refer to the packaging or contact LEDVANCE customer service directly. Keep your purchase receipt as proof of purchase.