مقدمة
Thank you for choosing the Staples Dexley Ergonomic Mesh Swivel Task Chair. This chair, part of the Union & Scale collection, is designed to provide ergonomic support and comfort for your workspace. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.
Image: The Staples Dexley Ergonomic Mesh Swivel Task Chair in grey, showcasinبفضل تصميمها العصري وظهرها الشبكي.
الإعداد والتجميع
The Staples Dexley chair is designed for straightforward assembly. All necessary hardware and tools are included. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
خطوات التجميع:
- فك مكونات الحزمة: Carefully remove all parts from the packaging and verify against the parts list (refer to your packaging for a complete list).
- ربط العجلات بالقاعدة: Insert the casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- إدراج رفع الغاز: قم بوضع أسطوانة رفع الغاز في الفتحة المركزية لقاعدة الكرسي.
- Assemble Seat and Back: Attach the seat mechanism to the bottom of the seat cushion. Then, connect the backrest to the seat assembly using the provided screws.
- إرفاق مساند للذراعين: Secure the armrests to the seat assembly.
- ربط المقعد برافعة الغاز: قم بوضع المقعد المجمع بعناية على أسطوانة رفع الغاز.
- تثبيت مسند الرأس: Insert the headrest into the designated slots at the top of the backrest.
Image: An exploded diagram illustrating the main components of the Staples Dexley chair, indicating how they fit together during assembly.
تعليمات التشغيل
Your Dexley chair offers multiple adjustment options to customize your seating experience for optimal ergonomic support.
- تعديل ارتفاع المقعد: Locate the lever under the right side of the seat. Pull the lever up to raise the seat; release to lock at desired height. To lower, pull the lever up while seated.
- Dynamic Recline and Tilt Tension: The chair features a dynamic recline function. Use the lever on the left side to lock the backrest in an upright position or unlock it for free movement. The tilt tension knob, located under the front of the seat, allows you to adjust the resistance of the recline. Turn clockwise to increase tension, counter-clockwise to decrease.
- دعم قطني قابل للتعديل: The lumbar support is height-adjustable. Gently push or pull the lumbar pad up or down on the backrest to find your preferred position.
- Height and Angle Adjustable Headrest: The headrest can be adjusted for both height and angle. Grasp the headrest and move it up or down, or tilt it forward/backward to support your neck and head.
- Height Adjustable Armrests: Press the button on the side of each armrest and slide the armrest up or down to your desired height. Release the button to lock.
الصورة: الجانب view of the chair illustrating the dynamic recline mechanism and the lever for seat height adjustment.
الصورة: تفصيلية view highlighting the height and angle adjustable headrest, breathable mesh back, and height-adjustable lumbar support.
Image: A close-up of the chair's armrests, showing their height adjustment capability and soft arm pads for forearm and shoulder support.
صيانة
Proper care will extend the life and appearance of your Staples Dexley chair.
- تنظيف: التنظيف الموضعي فقط. استخدم منظفًا معتدلًا وأضفamp cloth for spills or stains on the mesh and other surfaces. Avoid harsh chemicals or abrasive cleaners.
- التفتيش الدوري: افحص جميع البراغي والصواميل دوريًا للتأكد من إحكام ربطها. أعد ربطها إذا لزم الأمر.
- العناية بالعجلات: حافظ على العجلات خالية من الأوساخ (الشعر، الغبار) لضمان حركة سلسة.
استكشاف الأخطاء وإصلاحها
إذا واجهتك مشكلات مع كرسيك، راجع المشكلات والحلول الشائعة التالية.
- Chair Sinks or Does Not Stay Up:
This usually indicates an issue with the gas lift cylinder. Ensure the height adjustment lever is fully engaged. If the problem persists, the gas lift may need replacement.
- الكرسي يصدر صريراً أو يهتز:
Check all assembly bolts and screws. Tighten any loose fasteners. Lubrication of moving parts (e.g., tilt mechanism) with a silicone-based spray may also help.
- العجلات لا تدور بسلاسة:
Inspect casters for trapped debris such as hair or lint. Clean them thoroughly. Ensure the chair is used on an appropriate surface.
- Backrest Does Not Recline or Lock:
Verify that the recline lock lever is in the correct position. Adjust the tilt tension knob to ensure it's not set too tightly, preventing movement.
تحديد
Key specifications for the Staples Dexley Ergonomic Mesh Swivel Task Chair.
| ميزة | التفاصيل |
|---|---|
| ماركة | مشبك الورق |
| اسم الموديل | Dexley |
| رقم الموديل | UN61365 (ST63113-CC) |
| لون | رمادي |
| أبعاد المنتج | 28.2 بوصة عمق × 28.74 بوصة عرض × 50.8 بوصة ارتفاع |
| الأبعاد الكلية (الطول × العرض × العمق) | 45.3"-50.8"H x 28.2"W x 28.6"D |
| نمط الظهر | ظهر صلب، شبكي |
| المميزات الخاصة | Adjustable Lumbar, Ergonomic, Swivel, Adjustable Headrest, Adjustable Armrests, Dynamic Recline |
| الاستخدامات الموصى بها | مكتب |
| مواد التعبئة | شبكة |
| وزن العنصر | 48.5 رطل |
| سعة الوزن | يدعم ما يصل إلى 275 رطلاً. |
| رمز المنتج الموحد | 718103429771 |
Image: A diagram providing detailed measurements for the Staples Dexley chair, including width, depth, and height ranges for various components.
Image: A close-up of the chair's durable five-star base with 360-degree swivel casters, indicating a weight capacity of up to 275 lbs.
الضمان والدعم
For warranty information or technical support, please contact Staples customer service. Keep your purchase receipt as proof of purchase.
You can find more information and contact details on the official Staples webموقع: www.staples.com
