مقدمة
This manual provides essential information for the safe and effective installation, operation, and maintenance of your HELLA 2JA 959 037-801 Warning Light. Please read this manual thoroughly before use and retain it for future reference.
معلومات السلامة
احرص دائمًا على مراعاة احتياطات السلامة التالية لمنع الإصابة أو إتلاف المنتج:
- Ensure the vehicle's power supply is disconnected before installation.
- Installation should be performed by qualified personnel to ensure correct wiring and mounting.
- لا تقم بتعديل المنتج بأي شكل من الأشكال، لأن ذلك قد يبطل الضمان ويعرض السلامة للخطر.
- التحقق من أن حجم التشغيلtage of the vehicle matches the product's specifications (9-33V).
- Securely mount the warning light to prevent detachment during vehicle operation.
المنتج انتهىview
The HELLA 2JA 959 037-801 is an LED warning light designed for various automotive applications. It features a robust construction and a green lens, providing a clear flashing warning signal.
Figure 1: HELLA 2JA 959 037-801 Warning Light. This image displays the rectangular warning light with a prominent green LED lens in the center, flanked by yellow end caps.
المميزات الرئيسية:
- تقنية LED: Energy-efficient and long-lasting illumination.
- Flashing Warning Signal: Designed for clear visibility and safety.
- حجم واسعtagالنطاق الإلكتروني: Operates on 9-33V DC systems.
- حماية قوية: IP 6K6 and IP 6K7 rated for dust and water ingress.
- عكس حماية قطبية: Safeguards against incorrect wiring.
- قابلة لإعادة البرمجة: Functionality can be adjusted as needed.
تحديد
| يصف | قيمة |
|---|---|
| رقم الموديل | 2JA 959 037-801 |
| OEM Reference Number | 2JA 959 037-801 |
| المجلدtage المدى | 9-33 فولت |
| استهلاك الطاقة | 9 واط |
| تصميم الإضاءة | قاد |
| وظيفة الإضاءة | Flashing warning signal |
| لون العدسة | أخضر |
| نوع التركيب | انسحب |
| طول الكابل | 2500 ملم |
| الأبعاد (الطول × العرض × العمق) | 20.8 cm x 177 mm x 31 mm (Length x Width x Depth) |
| ارتفاع | 100 ملم |
| وزن | 0.5 كجم |
| Protection Type (IP Code) | IP 6K6, IP 6K7 |
| Test Mark | EMC, Fulfils ECE norm: R10 |
| عكس قطبية حماية | نعم |
| قابلة لإعادة البرمجة | نعم |
الإعداد والتثبيت
- التحضير للتثبيت:
- Ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical shock or short circuits.
- Choose a suitable mounting location that provides clear visibility for the warning light and allows for secure bolted mounting.
- تركيب الضوء:
- The warning light is designed for bolted mounting. Use appropriate fasteners (not included) to secure the unit firmly to the chosen surface.
- Ensure the mounting surface is flat and strong enough to support the light and withstand vehicle vibrations.
- التوصيلات السلكية:
- The light comes with a 2500 mm cable. Connect the positive (+) wire to a switched power source within the 9-33V range.
- Connect the negative (-) wire to a suitable vehicle ground.
- The unit features reverse polarity protection, but correct wiring is always recommended.
- Ensure all connections are secure and insulated to prevent corrosion and short circuits.
- التحقق النهائي:
- Once mounted and wired, reconnect the vehicle battery.
- Test the warning light to ensure it functions correctly, emitting a clear flashing signal.
تعليمات التشغيل
The HELLA 2JA 959 037-801 Warning Light is designed for straightforward operation.
- التفعيل: The warning light will activate when power is supplied to its connected circuit. This is typically controlled by a switch in the vehicle's cabin.
- Flashing Signal: Upon activation, the LED light will emit a flashing warning signal.
- إعادة البرمجة: This unit can be reprogrammed. Refer to specific HELLA programming tools and software for details on how to adjust flash patterns or other functionalities. This typically requires specialized equipment and knowledge.
صيانة
The HELLA 2JA 959 037-801 Warning Light requires minimal maintenance due to its durable design and LED technology.
- تنظيف: Periodically clean the lens with a soft, damp cloth and mild soap solution to ensure maximum light output. Avoid abrasive cleaners or solvents.
- تقتيش: Regularly check the mounting bolts for tightness and inspect the wiring for any signs of wear, damage, or corrosion.
- ضرر: If the housing or lens is damaged, the unit's IP rating may be compromised. Replace damaged units promptly.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يُضيء الضوء. | No power supply, faulty wiring, blown fuse, incorrect voltage. | Check power connections, vehicle fuse box, and ensure voltage is within 9-33V. Verify wiring for continuity. |
| الضوء يتذبذب أو يكون خافتًا. | اتصال غير محكم، مستوى صوت منخفضtage, damaged wiring. | Inspect all wiring connections for tightness. Check vehicle's electrical system for stable voltagالإخراج الإلكتروني. |
| Light pattern is incorrect or inconsistent. | Internal fault, incorrect reprogramming. | If recently reprogrammed, verify the programming steps. If not, contact HELLA technical support for assistance. |
| رطوبة داخل العدسة. | Compromised seal due to damage or improper installation. | Inspect the unit for cracks or damage. Ensure mounting is secure and not causing stress on the housing. Replace if seal is compromised. |
الضمان والدعم
For warranty information and technical support, please refer to the official HELLA website or contact your authorized HELLA distributor. Keep your purchase receipt as proof of purchase.
