دليل مستخدم جهاز اختبار الألياف الضوئية WANLUTECH MT-6510 OTDR

1. المقدمة

The WANLUTECH MT-6510 is a multi-functional testing device designed for fiber optic, CCTV, and network cable installations and maintenance. It integrates various testing capabilities including Optical Time Domain Reflectometer (OTDR), Optical Power Meter (OPM), Visual Fault Locator (VFL), Light Source (LS), Optical Loss Test (OLS), Event Map, IP Camera Test, HD Coaxial Camera Test, RJ45 Cable TDR Test, PoE, and Network Test Tools. This manual provides detailed instructions for the safe and effective operation of the device.

2. معلومات السلامة

• سلامة الليزر: Do not look directly into the optical ports (OTDR/LS, VFL) when the device is active. Laser radiation can cause eye damage.
• سلامة البطارية: Ensure the battery is correctly installed. Remove the insulating paper piece before first use. Use only the provided charger and battery.
• السلامة الكهربائية: Avoid exposing the device to moisture or extreme temperatures. Do not attempt to open or repair the device yourself.
• المعالجة العامة: Handle the device with care to prevent physical damage. Keep the device and accessories out of reach of children.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• WANLUTECH MT-6510 OTDR Fiber Optic Tester
• Digital Cable Tracer
• حقيبة الأدوات
• OTDR Test Report
• Accessories (power adapter, various cables, optical connectors)

Image 3.1: The MT-6510 tester with its complete set of accessories, including various cables, adapters, and a carrying case.

4. انتهى المنتجview والمكونات

The MT-6510 features a 5.4-inch IPS touchscreen and various ports for connectivity and testing. Familiarize yourself with the device layout:

الصورة 4.1: تفصيلية view of the MT-6510 tester's rear and side panels, highlighting ports such as DC power input/output, HDMI input, VGA input, RS485, LAN, PoE, OTDR/LS, VFL, OPM, and audio in/out. The image also shows the protective rubber sleeve and the battery compartment.

• اللوحة الأمامية: 5.4-inch IPS touchscreen display, navigation buttons, power button.
• اللوحة العلوية: OTDR/LS port, VFL port, OPM port.
• اللوحة الخلفية: DC 5V/2A power output, LED lamp, LAN2 & PoE & RJ45 TDR port, PSE in, AHD TVI CVI in, DC 12V/3A output, DC 24V/2A output, DC 12V input, HDMI input, Audio in/out, RS485 port, UTP Cable Test/Scan port, VGA input.

5. الإعداد

5.1 Initial Battery Preparation

Before using the tester for the first time, open the battery cover and remove the paper piece isolating the battery. This ensures proper electrical contact and allows the device to power on and charge.

5.2 تشغيل/إيقاف التشغيل

Press and hold the power button located on the device to turn it on or off. The device will boot up to the main menu interface.

5.3 شحن الجهاز

Connect the provided power adapter to the DC 12V input port on the device and plug it into a power outlet. The charging indicator will show the charging status.

6. تعليمات التشغيل

6.1 OTDR Functions

The OTDR function is used for testing fiber optic cables. It offers two primary modes: Quick Setup and Parameters Set.

Image 6.1.1: Screenshots illustrating the 'Quick Setup' mode for rapid configuration of OTDR tests and the 'Parameters Set' mode for advanced, precise adjustments of test parameters.

• وضع الإعداد السريع: Allows for rapid configuration of wavelength, distance range, pulse width, and measurement duration. Ideal for quick assessments.
• Parameters Set Mode: Provides advanced control for professional technicians to set wavelength, distance range, pulse width, measurement mode, IOR, non-reflection threshold, end threshold, and other parameters for more accurate curve results.
• Event Map: Visualizes fiber optic link inspection results, showing information like link length, connector types, fusion points, and break points in a graphical format.

Image 6.1.2: The Event Map interface displaying a visual representation of fiber optic link events and the Threshold Setting menu for defining pass/fail criteria for link attenuation and connection points.

• Multi-track Analysis: Display up to four curves simultaneously for comprehensive analysis, aiding in the detection of short-distance nodes with small pulse widths and longer test distances with large pulse widths.

Image 6.1.3: The multi-track analysis screen showing four distinct OTDR curves, allowing for comparative evaluation of fiber performance.

• File إدارة: Save test reports and curves in EXCEL and PDF formats. Manage saved files, including opening, deleting, and copying.

Image 6.1.4: Screenshots demonstrating the generation of test reports and the interface for managing saved OTDR files, including options for file format and naming.

6.2 Optical Test Functions

• عداد الطاقة الضوئية (OPM): Connect to the OPM port to measure optical power linearly or non-linearly. Supports calibrated wavelengths: 850/1300/1310/1490/1550/1625nm.

Image 6.2.1: The OPM interface showing a power reading in dBm and options to select different calibrated wavelengths for measurement.

• محدد موقع الخطأ المرئي (VFL): Used to determine fiber continuity and fault location. Features a 650nm wavelength laser with a maximum test range of 8KM.

Image 6.2.2: The VFL screen displaying a laser safety warning and controls for activating the 650nm laser in steady or evasive modes.

• Optical Loss Test (OLS): Measures the insertion loss of optical passive devices. Connect the OTDR/LS port and OPM port with a short fiber optic patch cable, then click "Start Test."

Image 6.2.3: The OLS interface showing the connection diagram for testing optical loss and the display of optical power and relative power measurements.

• Light Source (LS): Connect to the OTDR/LS port. Used for engineering and maintenance of optical communication and CATV fiber. Supports CW/270 Hz/330 Hz/1 kHz/2 kHz modes.

Image 6.2.4: The Light Source interface, showing options to select wavelength (1310nm/1550nm), mode (CW, 270Hz, 330Hz, 1kHz, 2kHz), and adjust power output.

6.3 CCTV Camera Test Functions

• IP Camera Test (IPC Test): Supports testing up to 4K 12MP IP cameras. Provides power information, IP discovery, and various test tools.

Image 6.3.1: The IPC Test screen displaying network information, PoE and DC 12V power details, and options for ONVIF and other test tools.

• IP Discovery & ONVIF: Automatically searches for IP addresses in the network segment and adjusts the tester's local IP. ONVIF allows automatic login, live video display, test report creation, and channel name modification.

Image 6.3.2: The IP Discovery function scanning for devices and the ONVIF interface showing live camera feed and login status.

• HIK / DH Camera Test: Supports batch activation of Hikvision and Dahua cameras, modification of IP addresses, passwords, and other settings.

Image 6.3.3: The HIK/DH Camera Test screen showing a list of detected cameras with options to enable, modify channel, modify network, modify password, and perform factory reset.

• HD Coaxial 4.0 Test: Supports testing up to 8MP AHD/TVI/CVI/CVBS cameras. Features UTC control, OSD menu, screenshot, video recording, and playback.

Image 6.3.4: The HD Coaxial 4.0 Test screen showing resolution comparison table for various camera types and the CVBS & HD Camera interface with UTC control and OSD menu options.

6.4 Cable Test Functions

• اختبار TDR لكابل RJ45: Tests the open and short status of network cables and measures cable length up to 600M.

Image 6.4.1: The RJ45 Cable TDR Test screen displaying the status of each wire pair (open/short) and measured cable length, along with a graphical representation of the cable sequence.

• Cable Tracer: Searches for BNC, network, and telephone cables from cluttered bundles.
• جهاز اختبار كابلات UTP: Tests UTP cable connection status, detecting near-end, mid-end, and far-end fault points of the RJ45 cable plug.

Image 6.4.2: Illustrations of the Cable Tracer in use for identifying cables and the Cable Tester interface showing connection status and fault locations for UTP cables.

• اختبار طول الكابل: Measures the breakpoint position (open circuit status) for BNC, RJ45, and RJ11 cables, up to 3000 meters.

Image 6.4.3: The Cable Length Test screen displaying the measured length and status (open) for each wire in a UTP cable, with options to calibrate and repeat tests.

• Cable Tracer + Electroscope: Quickly detects near-end, mid-end, and fault points of RJ45 cables. Includes non-contact electroscope for safe live wire identification.

Image 6.4.4: Visual representation of the Cable Tracer and Electroscope features, demonstrating cable tracing, result verification, non-contact electroscope for live wire detection, and intelligent identification of neutral and live wires.

6.5 Network Test Tools

The device includes professional network testing tools:

• بينغ
• مسح IP
• خادم DHCP
• PPPOE
• تتبع المسار
• منفذ فلاش
• مشروع تطوير الموانئ البحرية
• رابط مراقبة

Image 6.5.1: Screenshots of various network tools available on the MT-6510, including Link Monitor, LLDP, Port Flashing, Ping, IP Scan, DHCP Server, PPPOE, and Trace Route.

6.6 Power Functions

• انتاج الطاقة بو: Supports IEEE802.3af/at, max 48V, power output 25.5W. Note: The network cable connected to the PoE power output port (LAN port) must be a straight-through cable and cannot be short-circuited.
• إدارة الطاقة: Checks real-time voltage, power, and status of power output and input ports.

Image 6.6.1: The PoE Power Output screen showing active PoE status and the Power Management interface displaying input/output power, voltage, and status for various power ports.

• الكشف عن تقنية PoE: يقيس جهد مفتاح PoE أو مصدر طاقة PSEtagحالة اتصال الإنترنت والكابل.
• 12V Load Detection: Before testing, connect the 12V power adapter to the DC12V/IN connector and the 12V adapter cable to the DC12V/3A/OUT connector. The interface displays real-time voltage, power, and current parameters.

Image 6.6.2: The PoE Detection screen showing the protocol and power input details, and the 12V Load Detection screen displaying a real-time graph of voltage, power, and current.

6.7 Display and Input

• مدخلات HDMI: Supports max 4K 30 FPS. The CCTV tester can function as a display for HDMI sources.
• مدخل في جي ايه: Supports max 1280x1024P 60FPS. The CCTV tester can function as a display for VGA sources.

Image 6.7.1: Illustrations showing the MT-6510 connected as a display via HDMI input for DVR/NVR and via VGA input for other video sources.

• شاشة لمس IPS مقاس 5.4 بوصة: The device features a high-resolution (1920x1152) touchscreen for intuitive operation.

Image 6.7.2: The device's 5.4-inch IPS touchscreen display and an illustration of its internal components, including a 1.2GHz 4-core CPU, 1GB RAM, and 8GB FLASH (eMMC).

6.8 البرمجيات والاتصال

• TesterPlay (عرض الشاشة): Supports displaying the tester's screen on a PC or mobile phone simultaneously. Install the "TesterPlay" app on Android or use VLC player on PC to receive screen information.

Image 6.8.1: The TesterPlay interface showing a QR code for mobile app download and illustrating simultaneous screen display on the tester, PC, and Android mobile phone.

• محلل شبكة الواي فاي: Supports analyzing WiFi signal strength, channel level, and creating WiFi hotspots.
• FTP Serve: Allows copying and editing files from the SD card without using an SD card reader. Start the FTP service and enter the tester's FTP address in a computer's address bar.

Image 6.8.2: The WiFi Analyzer screen displaying signal strength and channel information, and the FTP Serve screen showing how to access fileق من جهاز كمبيوتر.

7. الصيانة

• تنظيف: Use a soft, dry cloth to clean the device's exterior. For the screen, use a screen-specific cleaning solution and cloth. Keep optical ports clean and free of dust.
• تخزين: Store the device in its protective tool bag in a cool, dry place away from direct sunlight and extreme temperatures.
• العناية بالبطارية: For prolonged storage, ensure the battery is partially charged (around 50%). Recharge periodically if not in use for extended periods to maintain battery health.
• تحديثات البرامج: تحقق من الشركة المصنعة website for any available software or firmware updates to ensure optimal performance and access to new features.

8. استكشاف الأخطاء وإصلاحها

• الجهاز لا يعمل: Ensure the battery insulating paper is removed and the battery is charged. Connect to the power adapter to check if it powers on.
• Inaccurate OTDR readings: Verify that optical connectors are clean. Check that test parameters (wavelength, IOR, pulse width) are correctly set for the fiber type being tested.
• Camera not detected during IPC Test: Ensure the camera is powered on and correctly connected to the LAN port. Verify network settings (IP address, subnet mask) for compatibility.
• Cable TDR test issues: Ensure the cable is properly connected and not damaged. Check for open or short circuits as indicated by the test results.
• شاشة اللمس لا تستجيب: أعد تشغيل الجهاز. إذا استمرت المشكلة، تواصل مع خدمة العملاء.

9. المواصفات

10. الضمان والدعم

For any questions or technical support, please contact WANLUTECH customer service. You can typically find support options through your purchase platform or the manufacturer's official website. Please refer to your purchase documentation for specific warranty details.

للاتصال بالدعم:

• Find your order on your Amazon account, view order details, and click 'get product support' to message us.
• You can find "WANGLU TESTER" on the product detail page, click on it and then message us.

The manufacturer aims to respond to inquiries within 12 hours.