دليل مستخدم جهاز تثبيت راوتر سطح العمل تريند 700 مم

1. المقدمة

The Trend KWJ700/A 700mm Worktop Router Jig is a precision tool designed to create seamless 35mm inset mason mitre joints on kitchen worktops. This jig is engineered for versatility, accommodating various materials such as laminated chipboard, wood, and compact laminate, enhancing project flexibility.

It is specifically designed for use with routers equipped with a 12.7mm cutter and a 30mm guide bush, ensuring accurate and clean cuts. The jig supports a wide range of common worktop widths, including 700mm, 650mm, 645mm, 635mm, 620mm, 616mm, 610mm, and 600mm. This manual provides comprehensive instructions for easy setup and precise operation, guaranteeing professional results.

2. الميزات الرئيسية

• Precision Joint Creation: Enables the creation of 35mm inset mason mitre joints for a seamless finish on kitchen worktops.
• توافق المواد المتنوعة: Ideal for laminated chipboard, wood, and compact laminate.
• Router Specific Design: Engineered for use with routers fitted with a 12.7mm cutter and a 30mm guide bush.
• Wide Worktop Width Range: Suitable for common worktop widths including 700mm, 650mm, 645mm, 635mm, 620mm, 616mm, 610mm, and 600mm.
• تعليمات مفصلة: Comes with extensive instructions for straightforward setup and accurate operation.

3. انتهى المنتجview

الشكل 1: من أعلى إلى أسفل view of the Trend KWJ700/A Worktop Router Jig. This image displays the overall layout of the jig, including the various routing channels and measurement indicators for different worktop widths and joint types. The Trend logo and model number KWJ700/A are clearly visible.

الشكل 2: مفصل view of the Trend KWJ700/A Worktop Router Jig. This image focuses on the 45-degree angle cutting guide and the various circular and elongated routing paths, indicating where the router will follow to create the precise mitre joints. Markings for different worktop widths are also visible.

الشكل 3: الجانب السفلي view of the Trend KWJ700/A Worktop Router Jig. This image shows the smooth, flat surface of the jig that rests on the worktop, along with the various holes and cutouts that correspond to the routing paths and clamping points on the top side. This view emphasizes the robust construction of the jig.

4. الإعداد

Proper setup is crucial for achieving accurate and clean cuts. Follow these steps carefully:

1. تجهيز منطقة العمل: Ensure your worktop and surrounding area are clean, stable, and well-lit.
2. جمع الأدوات: You will need a router, a 12.7mm (1/2 inch) router cutter, a 30mm guide bush, and appropriate clamps to secure the jig.
3. Select Worktop Width: Identify the correct routing channels on the jig corresponding to your worktop's width (e.g., 700mm, 650mm, 600mm).
4. قم بوضع أداة التثبيت: Place the jig accurately on the worktop, aligning it with the edge and the desired joint line. Ensure the jig is oriented correctly for the type of joint (left-hand or right-hand).
5. تثبيت القالب: Use suitable clamps to firmly secure the jig to the worktop. Ensure there is no movement or slippage during routing.
6. Install Router Cutter and Guide Bush: Attach the 12.7mm router cutter and the 30mm guide bush to your router according to your router's instructions.
7. ضبط عمق جهاز التوجيه: Adjust the router's cutting depth to match the thickness of your worktop, ensuring the cutter will pass completely through the material without damaging the surface beneath.

5. تعليمات التشغيل

Once the jig is securely set up, proceed with routing as follows:

1. Initial Pass: With the router switched off, place the router base onto the jig, ensuring the guide bush is correctly seated within the chosen routing channel.
2. Start Routing: Switch on the router and slowly guide it along the selected channel. Maintain constant pressure against the guide bush to ensure the cutter follows the jig's path precisely.
3. Multiple Passes (if necessary): For thicker materials, it may be beneficial to make multiple shallow passes rather than one deep cut to reduce strain on the router and cutter, and to achieve a cleaner finish.
4. أكمل القطع: Continue routing until the entire joint profile is cut. Ensure all waste material is removed.
5. Switch Off and Remove: Once the cut is complete, switch off the router and wait for the cutter to stop rotating before lifting it from the jig.
6. Unclamp and Inspect: بعناية unclamp the jig and remove it from the worktop. Inspect the cut for accuracy and cleanliness.
7. Create Bolt Recesses: The jig also includes guides for routing recesses for worktop connector bolts. Follow the markings on the jig to create these recesses for a strong and secure joint.

ملاحظة السلامة: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and dust mask when operating a router. Ensure the work area is clear of obstructions and bystanders.

6. الصيانة

To ensure the longevity and continued accuracy of your Trend Worktop Router Jig, follow these maintenance guidelines:

• تنظيف: After each use, wipe down the jig with a clean, dry cloth to remove any dust, wood chips, or residue. Avoid using harsh chemicals that could damage the jig's surface or markings.
• تخزين: Store the jig in a dry, clean environment, away from direct sunlight and extreme temperatures. Store it flat or hang it to prevent warping.
• تقتيش: Periodically inspect the jig for any signs of wear, damage, or deformation. Ensure all markings are clear and legible.
• Router Bit Maintenance: Always use sharp router bits. Dull bits can lead to poor cut quality and increased strain on your router and the jig.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

• رقم الموديل: KWJ700/A
• الشركة المصنعة: اتجاه
• أبعاد المنتج: 10.16 x 101 x 0.1 cm (4 x 39.8 x 0.04 inches)
• وزن المنتج: 5.8 كجم (12.8 رطل)
• Compatible Router Cutter: 12.7 ملم (1/2 بوصة)
• Compatible Guide Bush: 30 ملم
• Supported Worktop Widths: 700 مم، 650 مم، 645 مم، 635 مم، 620 مم، 616 مم، 610 مم، 600 مم
• Joint Type: 35mm Inset Mason Mitre
• بلد المنشأ: المملكة المتحدة

9. الضمان والدعم

This product is manufactured by Trend. For specific warranty information, please refer to the documentation included with your purchase or visit the official Trend website. For technical support or inquiries regarding the KWJ700/A Worktop Router Jig, please contact Trend customer service directly.

يرجى الاحتفاظ بإثبات الشراء الخاص بك لاستخدامه في أي مطالبات بالضمان.