Vente-unique JUVISIA Bed with Storage and Nightstands 160x200 cm Instruction Manual

1. انتهى المنتجview

The Vente-unique JUVISIA bed is designed to enhance comfort and functionality in your bedroom. This bed frame features integrated storage solutions, including nightstands with drawers and shelves, and built-in LED lighting. It is compatible with 160 x 200 cm mattresses and includes an AMBRACIE classic mattress.

Figure 1: Fully assembled JUVISIA bed with integrated nightstands and LED lighting.

2. تعليمات السلامة

Please read and understand all safety instructions before assembling or using the bed. Failure to follow these instructions may result in injury or damage to the product.

• حَشد: Always assemble the bed with at least two adults. Ensure all parts are correctly aligned and securely fastened before use.
• حدود الوزن: Do not exceed the maximum load capacity for drawers (2 kg), shelves (2 kg), or nightstands (2 kg).
• إضاءة LED: The LED system operates on 12V. Do not attempt to modify the electrical components. Connect only to a standard electrical outlet.
• أطفال: Keep small parts away from children during assembly. Do not allow children to play on or around the bed's storage mechanisms unsupervised.
• استقرار: تأكد من وضع السرير على سطح مستوٍ ومستقر.
• نقل السرير: عند نقل السرير، ارفعه بدلاً من سحبه لمنع تلف الإطار والأرضية.

3. الإعداد والتجميع

This bed requires assembly. It is recommended to have two people for the assembly process. Ensure you have sufficient space and all components are present before starting.

3.1. التفريغ والتحقق من المكونات

• Carefully unpack all boxes and lay out the components on a clean, soft surface to prevent scratches.
• Verify all parts listed in the included hardware and parts list are present. Contact customer support immediately if any parts are missing or damaged.

3.2. تجميع هيكل السرير

1. Begin by assembling the main bed frame structure using the provided screws and connectors. Ensure all connections are tight.
2. Attach the headboard and footboard to the side rails.
3. Install the central support beam and any additional support legs for the mattress foundation.

3.3. Storage Mechanism and Slats Installation

The bed features a lift-up slat system for access to under-bed storage.

Figure 2: Bed frame with mattress foundation lifted, showing storage access.

1. Assemble the slat frame according to the instructions.
2. Attach the hydraulic lift mechanism to the bed frame and the slat frame. Ensure the mechanism is securely fastened and operates smoothly.
3. Place the wooden slats into the designated holders on the slat frame.

3.4. Nightstands and LED Installation

1. Assemble the drawers and shelves for the integrated nightstands.
2. Attach the nightstand units to the headboard as indicated in the assembly guide.
3. Install the LED light strips into the designated channels on the headboard.
4. Connect the LED power cable to the 12V transformer and then to a standard electrical outlet.

3.5. وضع المرتبة

Figure 3: Included AMBRACIE classic mattress.

Once the bed frame and slat system are fully assembled, carefully place the 160 x 200 cm mattress onto the slat foundation.

4. تعليمات التشغيل

4.1. استخدام حجرة التخزين

• To access the under-bed storage, gently lift the mattress foundation from the foot end of the bed. The hydraulic mechanism will assist in lifting and holding the foundation in place.
• To close, gently pull the mattress foundation down until it rests securely on the bed frame.
• The integrated nightstands feature two drawers and two open shelves. Pull the drawers gently to open and push to close.

4.2. Operating the LED Lighting

The integrated LED lighting is controlled by a switch. Locate the switch, typically on the headboard or near the power connection, to turn the lights on or off.

5. الصيانة والعناية

• تنظيف الإطار: Wipe the bed frame surfaces with a soft, damp قماش. تجنب استخدام المنظفات الكاشطة أو المواد الكيميائية القاسية التي قد تتلف طبقة الميلامين.
• العناية بالفراش: The AMBRACIE mattress is reversible. Rotate and flip the mattress periodically (e.g., every 3-6 months) to ensure even wear and extend its lifespan. Follow specific care instructions provided with the mattress.
• أضواء LED: The LED lights are designed for long life. If a light fails, contact customer support for replacement options. Do not attempt to replace individual LEDs yourself.
• الأجهزة: افحص جميع البراغي والمثبتات بشكل دوري للتأكد من إحكام ربطها. أعد ربطها حسب الحاجة للحفاظ على الثبات.
• آلية التخزين: Keep the hydraulic lift mechanism free of obstructions. Do not apply excessive force when lifting or lowering the mattress foundation.

6. استكشاف الأخطاء وإصلاحها

7. المواصفات

8. الضمان والدعم

For warranty information, missing parts, or technical support, please contact Vente-unique customer service. Refer to your purchase documentation for specific warranty terms and contact details.

بائع: Vente-unique Italia

ASIN: B0CWV7LCB1