1. المقدمة
Thank you for choosing the Morpilot MF-MP01 Automatic Electric Milk Frother. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and retain it for future reference.
2. تعليمات السلامة
- اقرأ كافة التعليمات قبل استخدام الجهاز.
- Do not immerse the base unit in water or other liquids. Only the frothing jug can be rinsed.
- تأكد من حجم امدادات الطاقةtagيتطابق مع ملصق التصنيف الموجود على الجهاز.
- لا تقم بتشغيل الجهاز باستخدام سلك أو قابس تالف.
- احتفظ بالجهاز بعيدًا عن متناول الأطفال.
- Always place the frother on a flat, stable, heat-resistant surface.
- Do not fill above the maximum fill line to prevent overflow.
- Use only whole milk (fat content > 3.0%) for optimal frothing results.
- افصل الجهاز عن المنفذ عندما لا يكون قيد الاستخدام وقبل التنظيف.
3. انتهى المنتجview
The Morpilot MF-MP01 is a versatile 4-in-1 electric milk frother designed for various milk preparations.
الشكل 3.1: Morpilot MF-MP01 Milk Frother with included whisk attachments and cleaning brush.
عناصر:
- Electric Milk Frother Unit (with non-stick coating)
- Power Base (360° swivel)
- 2 Frothing Whisks (one for thick foam, one for thin foam)
- 1 Heating Whisk (for heating milk without frothing)
- فرشاة التنظيف
- دليل المستخدم
الشكل 3.2: Internal components and features including scratch-resistant interior, maximum frothing level, minimum liquid level, insulating plastic, non-stick coating, and 360° swivel base.
4. الإعداد
- أفرغ: قم بإزالة جميع المكونات بعناية من العبوة.
- ينظف: Before first use, clean the frothing jug interior and whisks with warm soapy water using the provided cleaning brush. Wipe the exterior of the frother and the power base with a damp cloth. Do not immerse the frother unit or power base in water.
- Assemble Whisk: Select the appropriate whisk for your desired function (frothing or heating) and securely install it onto the shaft at the bottom of the frothing jug. Ensure it clicks into place.
الشكل 4.1: Step 1 shows how to install the whisk into the frother unit.
5. تعليمات التشغيل
The Morpilot MF-MP01 offers four distinct functions for milk preparation. For best results, use cold whole milk (fat content > 3.0%).
خطوات التشغيل العامة:
- مكان على القاعدة: Position the frother unit securely onto the power base.
- أضف الحليب: Pour the desired amount of milk into the frothing jug. Observe the internal fill lines:
- Maximum frothing capacity: 130 ml
- Maximum heating capacity: 240 ml (8.12 oz)
- حدد الوظيفة: Press the power button to cycle through the four modes. The indicator lights will illuminate to show the selected function.
- يبدأ: The frother will automatically begin operation and stop when the cycle is complete (approximately 80-120 seconds).
الشكل 5.1: The control button allows selection of four functions: warm airy milk foam, warm dense milk foam, hot milk, and cold milk foam.
الوظائف المتاحة:
- Warm Airy Milk Foam: مثالي لتحضير الكابتشينو.
- Warm Dense Milk Foam: Suitable for lattes.
- رغوة الحليب الباردة: Perfect for iced coffees or cold beverages.
- سخني الحليب: For warming milk without frothing.
الشكل 5.2: The frother quickly prepares creamy milk foam for various drinks.
6. الصيانة والتنظيف
يضمن التنظيف المنتظم الأداء الأمثل ويطيل عمر جهاز رغوة الحليب.
- افصل: افصل الجهاز دائمًا عن مأخذ التيار الكهربائي قبل التنظيف.
- ترطيب: اترك جهاز صنع رغوة الحليب ليبرد تماماً بعد الاستخدام.
- إزالة المخفقة: Carefully remove the whisk from the frothing jug.
- نظافة داخلية: Rinse the interior of the frothing jug with warm water immediately after use. Use the provided cleaning brush and a small amount of mild dish soap to remove any milk residue. The non-stick coating makes cleaning easier.
- Clean Whisk: Wash the whisk under running water.
- المظهر الخارجي النظيف: امسح الجزء الخارجي من وحدة رغوة الحليب وقاعدة الطاقة بـamp قماش. لا تستخدم المنظفات الكاشطة أو الإسفنج.
- جاف: تأكد من أن جميع الأجزاء جافة تمامًا قبل إعادة التجميع أو التخزين.
الشكل 6.1: The attached brush facilitates easy cleaning of the frother's interior.
7. استكشاف الأخطاء وإصلاحها
If you encounter issues with your Morpilot MF-MP01, please refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يتم تشغيل Frother. | غير متصل بالكهرباء؛ الطاقة غير متوفرةtage; frother not correctly placed on base. | Ensure the power cord is securely plugged in. Check the power outlet. Re-seat the frother unit firmly on the power base. |
| Milk is not frothing or foam is poor quality. | Insufficient milk fat content; incorrect whisk; milk level too high/low; cold milk not used for cold foam. | Use cold whole milk (fat > 3.0%). Ensure the correct whisk is installed for frothing. Do not exceed the MAX frothing line. For cold foam, ensure milk is cold. |
| الحليب لا يسخن. | Incorrect whisk; milk level too high/low. | Ensure the heating whisk is installed if only heating is desired. Do not exceed the MAX heating line. |
| يتوقف جهاز رغوة الحليب قبل الأوان. | Overheating; internal sensor issue. | Unplug and allow the unit to cool down for at least 10 minutes. Ensure proper ventilation. If the problem persists, contact customer support. |
| رائحة احتراق أو التصاق الحليب بالقاع. | Residue from previous use; insufficient milk. | Clean the frothing jug thoroughly after each use. Ensure there is enough milk to cover the heating element. |
8. المواصفات
| ميزة | مواصفة |
|---|---|
| ماركة | موربيلوت |
| رقم الموديل | MF-MP01 |
| لون | أبيض |
| الأبعاد (الطول × العرض × الارتفاع) | 9.8 × 9.8 × 20 سم |
| وزن | 810 جرام |
| السعة (الرغوة) | ما يصل إلى 130 مل |
| السعة (التدفئة) | ما يصل إلى 240 مل |
| قوة | 400 واط |
| مادة | Plastic (with non-stick interior) |
| ميزة خاصة | Non-stick coating, 4-in-1 functions |
| عدد الإعدادات | 4 |
9. الضمان والدعم
Morpilot products are manufactured with quality and care. For warranty information or technical support, please refer to the warranty card included with your purchase or contact Morpilot customer service through their official website or the retailer where the product was purchased. Please have your model number (MF-MP01) and purchase date ready when contacting support.
