VIVO MOUNT-VC90-10 Ceiling Swivel TV Mount Instruction Manual

مقدمة

This instruction manual provides comprehensive guidance for the safe and effective installation, operation, and maintenance of your VIVO MOUNT-VC90-10 Ceiling Swivel TV Mount. Please read all instructions carefully before assembly and use. If you have any questions or require assistance, refer to the support section.

معلومات هامة حول السلامة

WARNING: Failure to read and follow all instructions can result in personal injury or property damage.

• تأكد من أن سطح التثبيت يمكنه دعم الوزن الإجمالي للتثبيت والشاشة بشكل آمن.
• Do not install into drywall alone. The mount must be secured into wood studs, concrete, or brick walls/ceilings.
• Use appropriate tools and hardware for your specific installation type.
• Always use two people for lifting and positioning the TV.
• لا تتجاوز الحد الأقصى للوزن وهو 110 رطلاً (50 كجم).
• Regularly check all screws and connections to ensure they remain secure.

المنتج انتهىview

The VIVO MOUNT-VC90-10 is a heavy-duty ceiling swivel TV mount designed for screens ranging from 37 to 90 inches. It features telescoping height adjustment, tilt, and 360° swivel capabilities, and integrated cable management for a clean installation.

Figure 1: Product dimensions, VESA compatibility (200x100mm to 800x400mm), and maximum weight capacity (110 lbs).

Figure 2: Heavy-duty construction ensures support for screens up to 90 inches and 110 lbs.

الإعداد والتثبيت

Careful installation is crucial for the safety and stability of your TV mount. Ensure you have all necessary tools and hardware before beginning.

1. Ceiling Preparation

This mount is compatible with both flat and sloped/vaulted ceilings. It must be installed into a solid wood stud, concrete, or brick. Do not install into drywall alone.

Figure 3: The mount is designed for installation on flat or sloped ceilings, requiring secure attachment to wood, brick, or concrete.

Mark the desired location for pilot holes on your ceiling. Pre-drill holes as per the manual's specifications and attach the mounting pole using appropriate screws.

2. Assembling the Pole

Slide the lower pole into the mounting pole to achieve the desired height. Secure it using the provided screws and nuts. The 10ft model allows for height adjustment from 98.5” to 118.2” from the ceiling.

Figure 4: Adjust the telescoping pole to set your TV at the optimal viewارتفاع جي.

3. Attaching VESA Support

Slide the VESA support onto the front of the mounting adapter and tighten the nuts to secure it. This forms the horizontal bar to which the TV's VESA brackets will attach.

4. Installing VESA Brackets on TV

Attach the VESA brackets to the back of your television using the screws appropriate for your TV's VESA pattern. Ensure they are securely fastened.

5. تركيب التلفزيون

With assistance, carefully lift and hang the TV with the VESA brackets onto the VESA support bar. Secure the VESA brackets by re-installing the collar screws. This step requires at least two people for safety.

6. إدارة الكابلات

Route power cords and other cables through the integrated cable management system within the pole for a clean and organized appearance.

Figure 5: Integrated cable management keeps wires tidy and out of sight.

دليل التثبيت بالفيديو

تعليمات التشغيل

Your VIVO MOUNT-VC90-10 mount offers flexible viewخيارات جي:

• ضبط الارتفاع: The telescoping pole allows you to adjust the TV's vertical position. Loosen the securing screws on the pole, adjust to the desired height, and re-tighten securely.
• تعديل الميل: The screen mount features a tilt range of 0° to -25°. Loosen the tilt adjustment screws, set the desired angle to reduce glare or optimize viewing, and re-tighten.
• تعديل الدوران: The mount provides a full 360° swivel, allowing you to rotate the TV horizontally to face any direction in the room.

Figure 6: Adjust the screen's tilt and swivel for optimal viewزوايا متعددة.

ميزة انتهتview فيديو

صيانة

To ensure the longevity and safe operation of your VIVO TV mount, perform the following maintenance checks periodically:

• التفتيش الدوري: Every few months, visually inspect all components for any signs of wear, damage, or corrosion.
• شد المثبتات: Check all screws, bolts, and nuts to ensure they are tight and secure. Over time, vibrations or adjustments can cause fasteners to loosen.
• تنظيف الأسطح: Wipe down the mount with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.

استكشاف الأخطاء وإصلاحها

If you encounter any issues with your VIVO MOUNT-VC90-10 mount, refer to the following common solutions:

• التلفزيون ليس مستويا: Check the VESA brackets on the back of the TV and the main support bar. Adjust as needed to ensure the TV is perfectly horizontal.
• Difficulty adjusting height/tilt/swivel: Ensure all locking screws or nuts related to the adjustment mechanism are sufficiently loosened before attempting to move the TV. Re-tighten after adjustment.
• الجبل يشعر بعدم الاستقرار: Immediately remove the TV from the mount. Re-check all installation steps, especially the ceiling attachment points and the security of all fasteners. Ensure the mounting surface is adequate and the weight capacity is not exceeded.
• اجزاء مفقودة: If any parts are missing upon unboxing, contact VIVO customer support immediately.

تحديد

معلومات الضمان

هذا المنتج VIVO مغطى بـ ضمان الشركة المصنعة لمدة 3 سنوات. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact VIVO customer support.

دعم العملاء

VIVO is a US-based company committed to providing high-quality ergonomic solutions. Our dedicated Sales and Technical Support team members are based in the U.S. and are available to assist you with any questions or concerns.

لمزيد من المساعدة، يرجى زيارة Official VIVO Store on Amazon أو راجع معلومات الاتصال الموضحة على عبوة المنتج.