دليل تعليمات مضخة وقود البنزين TOPWAY 110 فولت تيار متردد، 3.7 جالون في الدقيقة

مقدمة

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your TOPWAY 110V AC Gasoline Fuel Pump 3.7GPM. Please read this manual thoroughly before use to ensure proper function and to prevent injury or damage.

معلومات السلامة

تحذير: قد يؤدي عدم اتباع تعليمات السلامة هذه إلى نشوب حريق أو انفجار أو صدمة كهربائية أو إصابة خطيرة.

• Always operate the pump in a well-ventilated area.
• Do not use this pump for transferring highly corrosive liquids, water, or potable liquids. This pump is designed for gasoline, diesel, and light oils only.
• تأكد من أن جميع التوصيلات آمنة وخالية من التسرب قبل التشغيل.
• Keep the pump away from open flames, sparks, or any ignition sources.
• ارتدِ معدات الحماية الشخصية المناسبة، بما في ذلك القفازات وحماية العين.
• لا تقم بتشغيل المضخة إذا كان سلك الطاقة أو القابس تالفًا.
• The pump features overheat protection. If the pump stops unexpectedly, allow it to cool down before resuming operation.
• تأكد من أن مصدر الطاقة يتطابق مع حجم المضخةtage requirements (110V AC).

محتويات الحزمة

تأكد من أن جميع العناصر موجودة وغير تالفة عند فك العبوة:

• 1x TOPWAY 110V AC Fuel Transfer Pump
• 4x Hose Adaptors
• 4x خرطوم Clamps
• 1x شريط إحكام

Image: Contents of the TOPWAY 110V AC Gasoline Fuel Pump package.

الإعداد والتثبيت

Follow these steps to set up your fuel pump:

1. Attach Hose Adaptors: Securely attach the hose adaptors to the inlet and outlet ports of the pump. The pump features 1/2" NPT ports. Use the provided sealing tape on the threads to ensure a leak-proof connection.
2. ربط الخراطيم: Connect your fuel hoses (not included) to the hose adaptors. Use the provided hose clamps to tighten the hoses onto the adaptors, preventing leaks and ensuring a secure fit.
3. وضع المضخة: Place the pump on a stable, level surface. Ensure it is positioned safely, away from any potential ignition sources and in a well-ventilated area.
4. توصيل الطاقة: Plug the 13ft power cord into a grounded 110V AC outlet. Ensure the switch on the power cord is in the 'OFF' (center) position before plugging in.

Image: Key components and design features of the pump.

تعليمات التشغيل

This pump features a reversible pumping function for versatile use.

1. Prepare for Transfer: Ensure the suction hose is fully submerged in the liquid to be transferred and the discharge hose is securely placed in the receiving container.
2. Select Pumping Direction: The pump is equipped with a two-way switch (I/O/R).
   • Move the switch to position 'I' for forward pumping (liquid flows in the direction indicated by arrows on the pump body).
   • Move the switch to position 'R' for reverse pumping (liquid flows in the opposite direction). This is useful for draining hoses or returning excess fuel.
   • Position 'O' is OFF.
3. بدء الضخ: Once the direction is selected, the pump will begin transferring liquid. Monitor the transfer process closely. The pump has a maximum flow rate of 3.7 GPM and a maximum suction lift of 4.9 ft.
4. توقف عن الضخ: When the transfer is complete or if you need to pause, move the switch to the 'O' (OFF) position.
5. بعد الاستخدام: Disconnect the power and carefully remove hoses. Ensure all fuel is drained from the pump and hoses before storage.

Image: Illustration of the two-way pumping switch and flow direction.

Image: Pump in operation, highlighting efficiency and safety features.

صيانة

تضمن الصيانة المنتظمة طول عمر المضخة والأداء الأمثل لها.

• تنظيف: After each use, especially when transferring different types of liquids, flush the pump with a compatible cleaning agent or the liquid it will next transfer.
• تقتيش: Periodically inspect hoses, adaptors, and clamps for wear, cracks, or damage. Replace any damaged components immediately.
• تخزين: Store the pump in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure it is free of residual fuel before storage.
• المحرك: The pump is equipped with a pure copper motor designed for high efficiency and low noise. No user-serviceable parts are inside the motor housing.

استكشاف الأخطاء وإصلاحها

إذا واجهت أي مشكلات، راجع المشكلات والحلول الشائعة التالية:

• المضخة لا تبدأ:
  • Check if the power cord is securely plugged into a working 110V AC outlet.
  • Ensure the switch is in the 'I' or 'R' position.
  • تأكد من وجود تيار كهربائي في المقبس.
• Low Flow Rate or No Flow:
  • Check for kinks or blockages in the hoses.
  • Ensure the suction hose is fully submerged in the liquid.
  • Inspect all connections for air leaks; tighten clamps and adaptors if necessary.
  • Confirm the liquid level in the source container is above the pump's maximum suction lift (4.9 ft).
• Pump Overheating/Stopping:
  • The pump has built-in overheat protection. If it stops, disconnect power and allow it to cool down for at least 30 minutes.
  • Ensure the pump is not running dry.
  • Check for excessive back pressure in the discharge line.
• تسريبات من جهات اتصال:
  • شد الخرطومamps and ensure adaptors are properly sealed with tape.
  • Inspect hoses and adaptors for damage and replace if necessary.

تحديد

Image: Visual representation of pump specifications and dimensions.

الضمان والدعم

TOPWAY products are factory tested to ensure quality. For any inquiries or issues, please contact TOPWAY customer support. We aim to reply and resolve your problems within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official TOPWAY webموقع.