1. معلومات هامة حول السلامة
اقرأ جميع التعليمات بعناية قبل التركيب والاستخدام. قد يؤدي عدم اتباع هذه التعليمات إلى الإصابة أو تلف المنتج.
- Always ensure the mounting surface is structurally sound. For drywall installations, solid wood blocking is required to provide a secure mounting surface for the track.
- استخدم الأدوات المناسبة ومعدات السلامة أثناء التركيب.
- This barn door is heavy. Two people are recommended for safe handling and installation.
- Ensure all hardware is securely fastened before operating the door.
- احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن منطقة التثبيت.
2. محتويات العبوة
تأكد من وجود جميع المكونات المدرجة أدناه وأنها غير تالفة قبل البدء في التثبيت.
Figure 2.1: Included components for the JUBEST barn door kit.
- Door Panel (36" W x 84" H)
- Sliding Track (72" length)
- Roller Hangers (2 units)
- مقبض الباب
- Floor Guides (2 types available)
- أقراص مضادة للقفز
- سدادات الأبواب
- Wall Spacers
- Fasteners and Wrenches
3. مواصفات المنتج
| رقم الموديل | OJC101-YGD01 |
| أبعاد لوحة الباب | 36 بوصة عرض × 84 بوصة ارتفاع |
| سمك الباب | 1 3/8 بوصة |
| طول المسار | 72" |
| مادة | Solid Wood, MDF, PVC Covered (Door Panel); Carbon Steel (Hardware) |
| لون | أسود |
| وزن العنصر | 47 رطل |
| أبعاد المنتج (الإجمالي) | 84 × 12 × 3 بوصة |
Figure 3.1: Detailed dimensions of the barn door and hardware.
4. تعليمات التثبيت
The JUBEST barn door kit is designed for straightforward installation. Follow these steps carefully for optimal performance and safety.
الشكل 4.1: انتهىview of the easy installation process.
- Step 1: Prepare the Wall and Mount the Track
Identify stud locations. If installing into drywall, install a solid wood blocking board (not included) across the opening to provide a secure mounting surface for the track. Attach the carbon steel sliding track to the wall using the provided fasteners. Ensure the track is level and securely anchored.
- Step 2: Assemble the Door Panel
Assemble the door panel components according to the detailed instructions provided in the physical manual. The wave-shape panels are designed for easy assembly.
- Step 3: Attach Rollers and Handle to Door
Securely attach the roller hangers to the top edge of the assembled door panel. Install the door handle on the desired side of the door.
- Step 4: Hang the Door and Install Floor Guides
Carefully lift the door panel and hang the rollers onto the mounted track. Install the floor guides at the bottom of the door opening to prevent the door from swinging. Adjust door stoppers on the track to control the door's travel distance.
For detailed step-by-step instructions, refer to the included paper manual.
5. التشغيل
The JUBEST barn door is designed for smooth and quiet operation. To open or close the door, gently slide it along the track using the handle. The carbon steel hardware ensures a fluid motion.
Figure 5.1: The JUBEST barn door in an open position, demonstrating its sliding functionality.
Ensure the path of the door is clear of obstructions before sliding. The door stoppers on the track will prevent the door from sliding too far.
6. الصيانة
Regular maintenance will help preserve the appearance and functionality of your barn door.
- تنظيف: The PVC-covered surface of the door panel is waterproof and easy to clean. Use a soft, damp cloth to wipe down the door and hardware. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- فحص الأجهزة: Periodically inspect all screws and fasteners on the track and rollers to ensure they remain tight. Tighten any loose components to maintain smooth operation and safety.
- Track Lubrication: If the door's movement becomes less smooth over time, a small amount of silicone-based lubricant can be applied to the track and roller wheels.
Figure 6.1: The PVC surface allows for easy cleaning with a damp قطعة قماش.
7. استكشاف الأخطاء وإصلاحها
If you encounter any issues with your JUBEST barn door, refer to the following common problems and solutions:
- Door does not slide smoothly:
- Check if the track is level. Adjust if necessary.
- Inspect the rollers for any debris or damage. Clean or replace if needed.
- Ensure all track fasteners are tight.
- Apply a silicone-based lubricant to the track and rollers.
- Door is difficult to move:
- Verify that the floor guides are properly aligned and not causing friction.
- Ensure there are no obstructions in the door's path.
- Door swings away from the wall:
- Confirm that the floor guides are correctly installed and adjusted.
8. الضمان ودعم العملاء
JUBEST is committed to providing high-quality products and excellent customer service.
- For any quality problems, missing parts, or installation issues, please contact our professional customer service team.
- Our customer service team is available to assist you. Refer to your purchase documentation for contact details.
