1. المقدمة
The Solid State Logic PureDrive Octo is an 8-channel microphone preamplifier designed for professional audio recording and production environments. It integrates SSL's renowned PURE and DRIVE modes, offering versatile tonal characteristics, along with advanced digital connectivity and an onboard USB interface. This manual provides comprehensive instructions for the setup, operation, and maintenance of your PureDrive Octo unit.
The PureDrive Octo features four mic preamp input impedance options, allowing for exploration of various tonal possibilities and optimal matching with different microphone types. Each channel includes independent +48V phantom power, polarity inversion, and a High Pass Filter, making it a highly capable and feature-rich outboard microphone preampمكبر.
2. الميزات الرئيسية
- 8 channel high-performance PureDrive mic preamps.
- +48V phantom power, polarity invert, and 3rd order hi-pass filter per channel.
- 31-step Trim control with precise 1 dB increments for signal level adjustment and gain stagعمل.
- Line inputs via TRS Jack or dedicated D-Sub connectivity.
- Four mic preamp input impedance options to explore new tonal possibilities from dynamic and ribbon microphones.
- PURE and DRIVE modes, including a new 'Asymmetric' DRIVE option.
- Advanced digital connectivity (ADAT, AES/EBU).
- Onboard USB audio interface.
3. انتهى المنتجview
اللوحة الأمامية

This image displays the front panel of the PureDrive Octo. It features eight identical input channels, each with dedicated controls for Gain, Trim, and various processing options. On the right, digital metering and A/D conversion controls are visible.
اللوحة الخلفية

The rear panel provides all input and output connections. This includes XLR/TRS combo jacks for microphone/line inputs, D-Sub connectors for line inputs and outputs/sends, ADAT and AES/EBU digital outputs, Wordclock I/O, and a USB port for computer connectivity. The power inlet is located on the far left.
4. دليل الإعداد
4.1 التفريغ والتنسيب
- Carefully remove the PureDrive Octo from its packaging.
- Place the unit in a well-ventilated area, preferably in a standard 19-inch equipment rack. Ensure adequate airflow around the unit to prevent overheating.
- تجنب وضع الوحدة بالقرب من مصادر الحرارة أو في ضوء الشمس المباشر.
4.2 توصيل الطاقة
- تأكد من أن مفتاح الطاقة الخاص بالجهاز في وضع الإيقاف.
- Connect the supplied AC power cable to the IEC inlet on the rear panel of the PureDrive Octo.
- Plug the other end of the power cable into a grounded AC outlet.
4.3 اتصالات الصوت
- مدخلات الميكروفون: Connect microphones to the XLR inputs on the rear panel (Channels 1-8).
- مدخلات الخط: Connect line-level sources using TRS jacks or the dedicated D-Sub connectors on the rear panel.
- المخرجات الرقمية: Connect the ADAT OUT ports to your audio interface or digital mixer for multi-channel digital audio. Use AES/EBU outputs for stereo digital audio.
- اتصال USB: Connect the USB port on the rear panel to your computer for use as an audio interface. Install necessary drivers if prompted by your operating system.
- ساعة الكلمات: For synchronization with other digital audio devices, connect a Wordclock cable to the WORDCLOCK IN/OUT ports.
5. تعليمات التشغيل
5.1 تشغيل/إيقاف التشغيل
- To power on, flip the power switch on the rear panel to the ON position.
- لإيقاف التشغيل، قم بتحريك مفتاح الطاقة إلى وضع الإيقاف.
5.2 Channel Controls (Per Channel)
- مقبض الربح: Adjusts the input gain for the microphone preamplifier. Use this to set the primary signal level.
- TRIM Knob: Provides fine-tuning of the output level in 1 dB increments. This allows for precise level matching and can be used to drive the signal into the DRIVE circuit.
- زر +48 فولت: Engages phantom power for condenser microphones. Ensure the microphone is connected before activating.
- POLARITY Button: Inverts the phase of the input signal. Useful for correcting phase issues when using multiple microphones.
- HPF Button: Activates a High Pass Filter to reduce unwanted low-frequency rumble or proximity effect.
- Z.D. (Impedance) Button: Cycles through four input impedance options. Experiment with different settings to find the optimal tonal response for your microphone.
- PURE/DRIVE Button: Toggles between the PURE and DRIVE preamp الأوضاع.
- PURE Mode: Provides a clean, transparent, and linear ampالتصفية.
- DRIVE Mode: Introduces harmonic saturation and warmth. The PureDrive Octo also features an 'Asymmetric' DRIVE option for unique tonal shaping.
5.3 A/D Conversion and Digital Output Controls
- مقبض المعدل: يختار sample rate for the A/D converters (e.g., 44.1kHz, 48kHz, 88.2kHz, 96kHz).
- زر الساعة: Selects the clock source (Internal, Wordclock, USB).
- القياس: The front panel features LED meters for each channel, providing visual feedback on input levels.
6. الصيانة
- تنظيف: استخدم قطعة قماش ناعمة وجافة لتنظيف الجزء الخارجي من الجهاز. تجنب استخدام المنظفات الكاشطة أو المذيبات.
- تهوية: تأكد من عدم انسداد فتحات التهوية لمنع ارتفاع درجة الحرارة.
- تخزين: When not in use for extended periods, store the unit in a cool, dry environment, away from dust and extreme temperatures.
7. استكشاف الأخطاء وإصلاحها
- لا يوجد طاقة:
- Check if the power cable is securely connected to both the unit and the AC outlet.
- تأكد من أن منفذ الطاقة يعمل.
- لا يوجد مخرج صوتي:
- Ensure all audio cables are correctly connected to the inputs and outputs.
- Check the GAIN and TRIM settings on the relevant channels.
- Verify that the correct input source is selected on your receiving device (audio interface, mixer).
- If using digital outputs (ADAT, AES/EBU, USB), ensure sample rates and clocking are correctly synchronized between devices.
- صوت مشوه:
- Reduce the GAIN or TRIM level to prevent clipping.
- Check the input level of your microphone or line source.
- Ensure the PURE/DRIVE mode is set as desired; DRIVE mode intentionally adds harmonic distortion.
8. المواصفات
| يصف | قيمة |
|---|---|
| وزن العنصر | 19.51 رطل |
| أبعاد المنتج | 22 × 18 × 9 بوصة |
| رقم الموديل | 729745X2 |
| اسم اللون | أسود |
| الأجهزة المتوافقة | ميكروفون |
| نوع الموصل | إكس إل آر |
| مصدر الطاقة | كهرباء سلكية |
9. الضمان والدعم
For information regarding warranty coverage, technical support, or service, please contact Solid State Logic directly through their official webالموقع أو الموزعين المعتمدين. احتفظ بإثبات الشراء لتقديم مطالبات الضمان.
Official Solid State Logic Webموقع: www.solidstatelogic.com





